X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=configs%2Fjesurun_q5_defconfig;h=822d56b9965a1e64903c9c0e9b5b80b5b5b0f039;hb=e0549f8a174be5cf9526ec2d072cadc17a54a3e5;hp=8c9801918f1224ae470c914014599aecb5028fb9;hpb=252ed8729d8a2571faacb6fdb3463df2361a733d;p=u-boot

diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig
index 8c9801918f..822d56b996 100644
--- a/configs/jesurun_q5_defconfig
+++ b/configs/jesurun_q5_defconfig
@@ -1,20 +1,20 @@
-# The Jesurun Q5 has a black plastic casing with the approximate dimensions of
-# 100mm x 100mm x 24mm with rounded edges. In terms of hardware it features an
-# Allwinner A10 SoC with 1GB RAM and 8GB of NAND flash. The storage capacity
-# can be extended up to 32GB with a MicroSD card. The external connectors are:
-# 2x USB-A female supporting USB2.0, 3.5mm female jack for audio, HDMI female,
-# SPDIF, RJ45 LAN and Power. In addition the device has 1x red LED (hard wired
-# to power) and an programmable green led. On the board there is also an
-# unpopulated IR receiver and the UART. The device is equipped with an
-# AXP209 PMU.
-#
-# For more details see: http://linux-sunxi.org/Jesurun_Q5
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,MACPWR=SUNXI_GPH(19)"
-CONFIG_FDTFILE="sun4i-a10-jesurun-q5.dtb"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=312
-CONFIG_DRAM_ZQ=123
-CONFIG_DRAM_EMR1=0
+CONFIG_MACPWR="PH19"
+CONFIG_USB0_VBUS_PIN="PB9"
+CONFIG_VIDEO_COMPOSITE=y
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SUN4I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_HOST=y