X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=configs%2Fmixtile_loftq_defconfig;h=79d984ba7b89c74f67abac70b7274fc70e5b507b;hb=5f78786499593592bbd435445bd2d667de90fc5b;hp=416262792e30a4d08b2dcdd9bb91ddbad3688213;hpb=1131d4e22cf8f13d0dabaad7f1b84d9baffdfbd6;p=u-boot

diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig
index 416262792e..79d984ba7b 100644
--- a/configs/mixtile_loftq_defconfig
+++ b/configs/mixtile_loftq_defconfig
@@ -1,23 +1,20 @@
-# The Mixtile LOFT-Q is an A31 based board with 2G RAM, 8G EMMC, sdio wifi,
-# 1Gbit ethernet, HDMI display, toslink audio plug, 4 USB2.0 port, external
-# USB2SATA connector, sd card plug, 3x60 external fpic expansion connector,
-# NXP JN5168 zigbee gw, remote support.
-#
-# Also see http://focalcrest.com/en/pc.html#pro02
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
-CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
 CONFIG_MACH_SUN6I=y
-CONFIG_DRAM_CLK=312
 CONFIG_DRAM_ZQ=251
-CONFIG_MMC_SUNXI_SLOT=0
+CONFIG_MACPWR="PA21"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-# Wifi power
-CONFIG_AXP221_ALDO1_VOLT=3300
-# Vbus gpio for usb1
 CONFIG_USB1_VBUS_PIN="PH24"
-# No Vbus gpio for usb2
 CONFIG_USB2_VBUS_PIN=""
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_RGMII=y
+CONFIG_SUN7I_GMAC=y
+CONFIG_AXP_ALDO1_VOLT=3300
+CONFIG_USB_EHCI_HCD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y