X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=configs%2Ftaurus_defconfig;h=81b95b2903e058462d8f282149a09fdb8890f487;hb=031fa18f70c38fe53a90f6ab4a1a441bf1a78280;hp=4e5fad7ad4ac34462b1d7cb0b4edc7221c4fb629;hpb=8197d92843952b376915fdbcbf67c723feab1532;p=u-boot

diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig
index 4e5fad7ad4..81b95b2903 100644
--- a/configs/taurus_defconfig
+++ b/configs/taurus_defconfig
@@ -4,6 +4,7 @@ CONFIG_SPL_SYS_THUMB_BUILD=y
 # CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_AT91=y
 CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds"
+CONFIG_SYS_TEXT_BASE=0x21000000
 CONFIG_TARGET_TAURUS=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -13,23 +14,21 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus"
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS"
-CONFIG_ENV_IS_IN_NAND=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL=y
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
 CONFIG_CMD_DFU=y
-# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_NAND=y
 CONFIG_CMD_SF=y
@@ -43,6 +42,7 @@ CONFIG_CMD_MTDPARTS=y
 # CONFIG_DOS_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_OF_EMBED=y
+CONFIG_ENV_IS_IN_NAND=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_DFU_NAND=y
@@ -53,8 +53,8 @@ CONFIG_PHYLIB=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0908
+CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Siemens AG"
-CONFIG_G_DNL_VENDOR_NUM=0x0908
-CONFIG_G_DNL_PRODUCT_NUM=0x02d2
 CONFIG_USE_TINY_PRINTF=y