X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=cpu%2Fblackfin%2Fserial.h;h=6cbc564b532b974ebbf5ecd1a2fb8893545b3959;hb=39ff7d5f4cc547a2034a8bfc2a5b5f4b62fd5c20;hp=f671096768b6b0bffce7ff5984335bb2b85da4c0;hpb=c1b7c70083fc8d0bb77db20dd47bb6c988f3dc67;p=u-boot

diff --git a/cpu/blackfin/serial.h b/cpu/blackfin/serial.h
index f671096768..6cbc564b53 100644
--- a/cpu/blackfin/serial.h
+++ b/cpu/blackfin/serial.h
@@ -81,11 +81,6 @@
 
 #ifndef __ASSEMBLY__
 
-/* We cannot use get_sclk() in initcode as it is defined elsewhere. */
-#ifdef BFIN_IN_INITCODE
-# define get_sclk() (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV)
-#endif
-
 #ifdef __ADSPBF54x__
 # define ACCESS_LATCH()
 # define ACCESS_PORT_IER()
@@ -146,7 +141,7 @@ static inline void serial_early_init(void)
 	/* handle portmux crap on different Blackfins */
 	serial_do_portmux();
 
-	/* Enable UART */
+	/* always enable UART -- avoids anomalies 05000309 and 05000350 */
 	*pUART_GCTL = UCEN;
 
 	/* Set LCR to Word Lengh 8-bit word select */
@@ -156,16 +151,25 @@ static inline void serial_early_init(void)
 }
 
 __attribute__((always_inline))
-static inline uint32_t serial_early_get_baud(void)
+static inline void serial_early_put_div(uint16_t divisor)
 {
-	/* If the UART isnt enabled, then we are booting an LDR
-	 * from a non-UART source (so like flash) which means
-	 * the baud rate here is meaningless.
-	 */
-	if ((*pUART_GCTL & UCEN) != UCEN)
-		return 0;
+	/* Set DLAB in LCR to Access DLL and DLH */
+	ACCESS_LATCH();
+	SSYNC();
+
+	/* Program the divisor to get the baud rate we want */
+	*pUART_DLL = LOB(divisor);
+	*pUART_DLH = HIB(divisor);
+	SSYNC();
 
-#if (0)	/* See comment for serial_reset_baud() in initcode.c */
+	/* Clear DLAB in LCR to Access THR RBR IER */
+	ACCESS_PORT_IER();
+	SSYNC();
+}
+
+__attribute__((always_inline))
+static inline uint16_t serial_early_get_div(void)
+{
 	/* Set DLAB in LCR to Access DLL and DLH */
 	ACCESS_LATCH();
 	SSYNC();
@@ -173,18 +177,19 @@ static inline uint32_t serial_early_get_baud(void)
 	uint8_t dll = *pUART_DLL;
 	uint8_t dlh = *pUART_DLH;
 	uint16_t divisor = (dlh << 8) | dll;
-	uint32_t baud = get_sclk() / (divisor * 16);
 
 	/* Clear DLAB in LCR to Access THR RBR IER */
 	ACCESS_PORT_IER();
 	SSYNC();
 
-	return baud;
-#else
-	return CONFIG_BAUDRATE;
-#endif
+	return divisor;
 }
 
+/* We cannot use get_sclk() early on as it uses caches in external memory */
+#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL)
+# define get_sclk() (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV)
+#endif
+
 __attribute__((always_inline))
 static inline void serial_early_set_baud(uint32_t baud)
 {
@@ -192,20 +197,7 @@ static inline void serial_early_set_baud(uint32_t baud)
 	 * weird multiplication is to make sure we over sample just
 	 * a little rather than under sample the incoming signals.
 	 */
-	uint16_t divisor = (get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230;
-
-	/* Set DLAB in LCR to Access DLL and DLH */
-	ACCESS_LATCH();
-	SSYNC();
-
-	/* Program the divisor to get the baud rate we want */
-	*pUART_DLL = LOB(divisor);
-	*pUART_DLH = HIB(divisor);
-	SSYNC();
-
-	/* Clear DLAB in LCR to Access THR RBR IER */
-	ACCESS_PORT_IER();
-	SSYNC();
+	serial_early_put_div((get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230);
 }
 
 #ifndef BFIN_IN_INITCODE
@@ -235,32 +227,6 @@ static inline void serial_early_puts(const char *s)
 #endif
 .endm
 
-/* Recursively expand calls to _serial_putc for every byte
- * passed to us.  Append a newline when we're all done.
- */
-.macro _serial_early_putc byte:req morebytes:vararg
-#ifdef CONFIG_DEBUG_EARLY_SERIAL
-	R0 = \byte;
-	call _serial_putc;
-.ifnb \morebytes
-	_serial_early_putc \morebytes
-.else
-.if (\byte != '\n')
-	_serial_early_putc '\n'
-.endif
-.endif
-#endif
-.endm
-
-/* Wrapper around recurisve _serial_early_putc macro which
- * simply prepends the string "Early: "
- */
-.macro serial_early_putc byte:req morebytes:vararg
-#ifdef CONFIG_DEBUG_EARLY_SERIAL
-	_serial_early_putc 'E', 'a', 'r', 'l', 'y', ':', ' ', \byte, \morebytes
-#endif
-.endm
-
 /* Since we embed the string right into our .text section, we need
  * to find its address.  We do this by getting our PC and adding 2
  * bytes (which is the length of the jump instruction).  Then we