X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=doc%2FREADME.PXA_CF;h=1d76b32dd7ad22a51c7473c25acea850ee23847c;hb=64e55d5ed40e4de2dd52910f7634304fbebe1840;hp=e443d3959620a94f256a511f76c567141a7e671d;hpb=ea66bc8804b66633faae5b7066571c9d68b4d14a;p=u-boot

diff --git a/doc/README.PXA_CF b/doc/README.PXA_CF
index e443d39596..1d76b32dd7 100644
--- a/doc/README.PXA_CF
+++ b/doc/README.PXA_CF
@@ -6,41 +6,49 @@ follow the connections of the standard lubbock. Anyway just the block
 marked memory configuration should be touched since the other parameters
 are imposed by the PXA architecture.
 
+EDIT 2010-07-01: in common/cmd_ide.c, having CONFIG_PXA_PCMCIA defined
+would cause looping on inw()/outw() rather than using insw()/outsw(),
+thus making sure IDE / ATA bytes are properly swapped. This behaviour
+is now controlled by CONFIG_IDE_SWAP_IO, therefore PXA boards with
+PCMCIA should #define CONFIG_IDE_SWAP_IO.
+
+#define CONFIG_IDE_SWAP_IO
+
 #define CONFIG_PXA_PCMCIA 1
 #define CONFIG_PXA_IDE 1
 
 #define CONFIG_PCMCIA_SLOT_A 1
 /* just to keep build system happy  */
 
-#define CFG_PCMCIA_MEM_ADDR     0x28000000
-#define CFG_PCMCIA_MEM_SIZE     0x10000000
+#define CONFIG_SYS_PCMCIA_MEM_ADDR     0x28000000
+#define CONFIG_SYS_PCMCIA_MEM_SIZE     0x10000000
 
-#define CFG_MECR_VAL		0x00000000
-#define CFG_MCMEM0_VAL		0x00004204
-#define CFG_MCMEM1_VAL		0x00000000
-#define CFG_MCATT0_VAL		0x00010504
-#define CFG_MCATT1_VAL		0x00000000
-#define CFG_MCIO0_VAL		0x00008407
-#define CFG_MCIO1_VAL		0x00000000
+#define CONFIG_SYS_MECR_VAL		0x00000000
+#define CONFIG_SYS_MCMEM0_VAL		0x00004204
+#define CONFIG_SYS_MCMEM1_VAL		0x00000000
+#define CONFIG_SYS_MCATT0_VAL		0x00010504
+#define CONFIG_SYS_MCATT1_VAL		0x00000000
+#define CONFIG_SYS_MCIO0_VAL		0x00008407
+#define CONFIG_SYS_MCIO1_VAL		0x00000000
 /* memory configuration */
 
-#define CFG_IDE_MAXBUS		1
+#define CONFIG_SYS_IDE_MAXBUS		1
 /* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1
+#define CONFIG_SYS_IDE_MAXDEVICE	1
 /* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	0x20000000
+#define CONFIG_SYS_ATA_BASE_ADDR	0x20000000
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	0x1f0
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x1f0
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	0x1f0
+#define CONFIG_SYS_ATA_REG_OFFSET	0x1f0
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x3f0
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x3f0
 
 
 Another important point is that maybe you have to power the pcmcia