X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=doc%2FREADME.m54455evb;h=918a746eb888ecbefc41fee4405c725b58f57c7f;hb=180e311f2893cb2a9ef48c8bf856c608dafff721;hp=f695da5f1ccb4211df051332d2b68b6a89a7d877;hpb=6d0f6bcf337c5261c08fabe12982178c2c489d76;p=u-boot

diff --git a/doc/README.m54455evb b/doc/README.m54455evb
index f695da5f1c..918a746eb8 100644
--- a/doc/README.m54455evb
+++ b/doc/README.m54455evb
@@ -18,13 +18,13 @@ Changed files:
 - common/cmd_bdinfo.c		Clock frequencies output
 - common/cmd_mii.c		mii support
 
-- cpu/mcf5445x/cpu.c		cpu specific code
-- cpu/mcf5445x/cpu_init.c	Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
-- cpu/mcf5445x/interrupts.c	cpu specific interrupt support
-- cpu/mcf5445x/speed.c		system, pci, flexbus, and cpu clock
-- cpu/mcf5445x/Makefile		Makefile
-- cpu/mcf5445x/config.mk	config make
-- cpu/mcf5445x/start.S		start up assembly code
+- arch/m68k/cpu/mcf5445x/cpu.c		cpu specific code
+- arch/m68k/cpu/mcf5445x/cpu_init.c	Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
+- arch/m68k/cpu/mcf5445x/interrupts.c	cpu specific interrupt support
+- arch/m68k/cpu/mcf5445x/speed.c		system, pci, flexbus, and cpu clock
+- arch/m68k/cpu/mcf5445x/Makefile		Makefile
+- arch/m68k/cpu/mcf5445x/config.mk	config make
+- arch/m68k/cpu/mcf5445x/start.S		start up assembly code
 
 - doc/README.m54455evb	This readme file
 
@@ -52,12 +52,12 @@ Changed files:
 
 - include/configs/M54455EVB.h	Board specific configuration file
 
-- lib_m68k/board.c			board init function
-- lib_m68k/cache.c
-- lib_m68k/interrupts			Coldfire common interrupt functions
-- lib_m68k/m68k_linux.c
-- lib_m68k/time.c			Timer functions (Dma timer and PIT)
-- lib_m68k/traps.c			Exception init code
+- arch/m68k/lib/board.c			board init function
+- arch/m68k/lib/cache.c
+- arch/m68k/lib/interrupts			Coldfire common interrupt functions
+- arch/m68k/lib/m68k_linux.c
+- arch/m68k/lib/time.c			Timer functions (Dma timer and PIT)
+- arch/m68k/lib/traps.c			Exception init code
 
 - rtc/mcfrtc.c				Realtime clock Driver
 
@@ -276,7 +276,6 @@ baudrate    = 115200 bps
 ->
 -> help
 ?       - alias for 'help'
-autoscr - run script from memory
 base    - print or set address offset
 bdinfo  - print Board Info structure
 boot    - boot default, i.e., run 'bootcmd'
@@ -304,17 +303,11 @@ fsinfo	- print information about filesystems
 fsload	- load binary file from a filesystem image
 go      - start application at address 'addr'
 help    - print online help
+i2c     - I2C sub-system
 icache  - enable or disable instruction cache
-icrc32  - checksum calculation
 ide     - IDE sub-system
-iloop   - infinite loop on address range
-imd     - i2c memory display
 iminfo  - print header information for application image
 imls    - list all images found in flash
-imm     - i2c memory modify (auto-incrementing)
-imw     - memory write (fill)
-inm     - memory modify (constant address)
-iprobe  - probe to discover valid I2C chip addresses
 itest	- return true/false on integer compare
 loadb   - load binary file over serial line (kermit mode)
 loads   - load S-Record file over serial line
@@ -338,6 +331,7 @@ run     - run commands in an environment variable
 saveenv - save environment variables to persistent storage
 setenv  - set environment variables
 sleep   - delay execution for some time
+source  - run script from memory
 tftpboot- boot image via network using TFTP protocol
 version - print monitor version
 ->bootm 4000000