X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=doc%2FREADME.m68k;h=c85febc1f1fb3447c8fbc82579cc1a5cd6fd59cb;hb=fc6e442568b645fc8132f7bc41623370953d4661;hp=a00ab69b6f8bdc12402a0fd42f36a917913fdfb2;hpb=a4145534851bf74619cb373a942613a74547bb82;p=u-boot diff --git a/doc/README.m68k b/doc/README.m68k index a00ab69b6f..c85febc1f1 100644 --- a/doc/README.m68k +++ b/doc/README.m68k @@ -72,7 +72,7 @@ For the preloader, please see http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.html U-boot is configured to run at 0x20000 at default. This can be configured by -change TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in +change CONFIG_SYS_TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in include/configs/M5282EVB.h. 3.2 BuS EB+MCF-EV123 @@ -96,7 +96,7 @@ CONFIG_MONITOR_IS_IN_RAM must be defined. If it is defined the initial vector table and basic processor initialization will not be compiled in. The start address of u-boot must be adjusted in the boards config header file (CONFIG_SYS_MONITOR_BASE) and Makefile -(TEXT_BASE) to the load address. +(CONFIG_SYS_TEXT_BASE) to the load address. 4.1 MCF5272 specific Options/Settings ------------------------------------- @@ -111,7 +111,7 @@ CONFIG_SYS_MBAR -- defines the base address of the MCF5272 configuration registe CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5272 internal SRAM CONFIG_SYS_ENET_BD_BASE - -- defines the base addres of the FEC buffer descriptors + -- defines the base address of the FEC buffer descriptors CONFIG_SYS_SCR -- defines the contents of the System Configuration Register CONFIG_SYS_SPR -- defines the contents of the System Protection Register @@ -138,7 +138,7 @@ CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_INT_FLASH_BASE -- defines the base address of the MCF5282 internal Flash memory CONFIG_SYS_ENET_BD_BASE - -- defines the base addres of the FEC buffer descriptors + -- defines the base address of the FEC buffer descriptors CONFIG_SYS_MFD -- defines the PLL Multiplication Factor Devider