X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=doc%2FREADME.mpc85xxads;h=9b35fb2016a95062a0d84376082ba7243a66df84;hb=308277569229137e38420dbaa1190ef1f9d4be76;hp=f0cf782a8fc92434943ccd3ef9d1f59ae246fcf4;hpb=0c8721a466b5e0eca7e7fbe1007777fa82100541;p=u-boot

diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index f0cf782a8f..9b35fb2016 100644
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -35,7 +35,7 @@ Updated 13-July-2004 Jon Loeliger
     "On"  == 0
 
     SW18 is switch 18 as silk-screened onto the board.
-    SW4[8] is the bit labled 8 on Switch 4.
+    SW4[8] is the bit labeled 8 on Switch 4.
     SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2
     SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3
 
@@ -100,11 +100,14 @@ Updated 13-July-2004 Jon Loeliger
 	SW7[1:4]  =    0101 =  5    => 5 x 66	 = 330	CCB Sysclk
 	SW7[5:6]  =	 01	    => 5:2 x 330 = 825	Core clock
 
+    In order to use PCI-X (only in the first PCI slot.  The one with
+    the RIO connector), you need to set SW1[4] (config) to 1 (off).
+    Also, configure the board to run PCI at 66 MHz.
 
 2. MEMORY MAP TO WORK WITH LINUX KERNEL
 
 2.1. For the initial bringup, we adopted a consistent memory scheme
-     between u-boot and linux kernel, you can customize it based on your
+     between U-Boot and linux kernel, you can customize it based on your
      system requirements:
 
      0x0000_0000     0x7fff_ffff     DDR		     2G
@@ -121,8 +124,8 @@ Updated 13-July-2004 Jon Loeliger
     kernel's ppcboot.h is consistent with U-Boot's u-boot.h. You can use two
     default configuration files as your starting points to configure the
     kernel:
-	arch/ppc/configs/mpc8540_ads_defconfig
-	arch/ppc/configs/mpc8560_ads_defconfig
+	arch/powerpc/configs/mpc8540_ads_defconfig
+	arch/powerpc/configs/mpc8560_ads_defconfig
 
 3. DEFINITIONS AND COMPILATION
 
@@ -133,16 +136,14 @@ Updated 13-July-2004 Jon Loeliger
     CONFIG_BOOKE	    BOOKE(e.g. Motorola MPC85xx, AMCC 440, etc)
     CONFIG_E500		    BOOKE e500 family(Motorola)
     CONFIG_MPC85xx	    MPC8540,MPC8560 and their derivatives
-    CONFIG_MPC8540	    MPC8540 specific
-    CONFIG_MPC8540ADS	    MPC8540ADS board specific
-    CONFIG_MPC8560ADS	    MPC8560ADS board specific
+    CONFIG_ARCH_MPC8540	    MPC8540 specific
     CONFIG_TSEC_ENET	    Use on-chip 10/100/1000 ethernet for networking
     CONFIG_SPD_EEPROM	    Use SPD EEPROM for DDR auto configuration, you can
 			    also manual config the DDR after undef this
 			    definition.
     CONFIG_DDR_ECC	    only for ECC DDR module
-    CONFIG_DDR_DLL	    DLL fix on some ADS boards needed for more
-			    stability.
+    CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	    DLL fix on some ADS boards needed
+			    for more stability.
     CONFIG_HAS_FEC	    If an FEC is on chip, set to 1, else 0.
 
 Other than the above definitions, the rest in the config files are
@@ -189,7 +190,7 @@ straightforward.
     and future revisions of 8540/8560.
 
 
-4.4 Reflash U-boot Image using U-boot
+4.4 Reflash U-Boot Image using U-Boot
 
     tftp 10000 u-boot.bin
     protect off fff80000 ffffffff