X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=doc%2FREADME.mpc85xxads;h=d059a979817ff0e97d89d8f569a963c25bee7e67;hb=f194f6ba5bebb13d2f3f90513d224b95c86ddc5f;hp=08d6831fb62abfc9233df043b3d29bfe02276471;hpb=cbf9c117282b8729bdb86071997b58fcab58c444;p=u-boot

diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index 08d6831fb6..d059a97981 100644
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -100,6 +100,9 @@ Updated 13-July-2004 Jon Loeliger
 	SW7[1:4]  =    0101 =  5    => 5 x 66	 = 330	CCB Sysclk
 	SW7[5:6]  =	 01	    => 5:2 x 330 = 825	Core clock
 
+    In order to use PCI-X (only in the first PCI slot.  The one with
+    the RIO connector), you need to set SW1[4] (config) to 1 (off).
+    Also, configure the board to run PCI at 66 MHz.
 
 2. MEMORY MAP TO WORK WITH LINUX KERNEL
 
@@ -121,8 +124,8 @@ Updated 13-July-2004 Jon Loeliger
     kernel's ppcboot.h is consistent with U-Boot's u-boot.h. You can use two
     default configuration files as your starting points to configure the
     kernel:
-	arch/ppc/configs/mpc8540_ads_defconfig
-	arch/ppc/configs/mpc8560_ads_defconfig
+	arch/powerpc/configs/mpc8540_ads_defconfig
+	arch/powerpc/configs/mpc8560_ads_defconfig
 
 3. DEFINITIONS AND COMPILATION
 
@@ -130,7 +133,7 @@ Updated 13-July-2004 Jon Loeliger
 	include/configs/MPC8540ADS.h
 	include/configs/MPC8560ADS.h
 
-    CONFIG_BOOKE	    BOOKE(e.g. Motorola MPC85xx, IBM 440, etc)
+    CONFIG_BOOKE	    BOOKE(e.g. Motorola MPC85xx, AMCC 440, etc)
     CONFIG_E500		    BOOKE e500 family(Motorola)
     CONFIG_MPC85xx	    MPC8540,MPC8560 and their derivatives
     CONFIG_MPC8540	    MPC8540 specific
@@ -141,8 +144,8 @@ Updated 13-July-2004 Jon Loeliger
 			    also manual config the DDR after undef this
 			    definition.
     CONFIG_DDR_ECC	    only for ECC DDR module
-    CONFIG_DDR_DLL	    DLL fix on some ADS boards needed for more
-			    stability.
+    CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	    DLL fix on some ADS boards needed
+			    for more stability.
     CONFIG_HAS_FEC	    If an FEC is on chip, set to 1, else 0.
 
 Other than the above definitions, the rest in the config files are