X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=doc%2FREADME.odroid;h=8a004ca6ba6b9c55e5407b3c9abbdc2b5e62cdaf;hb=6d846c726b300fcb4e5b9228709e6752459e7553;hp=528bb952795b5ea55a68338bdf9100d8e14e4dd2;hpb=a6bc0195dba895fa0e9facc718d17eb098695685;p=u-boot diff --git a/doc/README.odroid b/doc/README.odroid index 528bb95279..8a004ca6ba 100644 --- a/doc/README.odroid +++ b/doc/README.odroid @@ -1,28 +1,39 @@ - U-boot for Odroid X2/U3 + U-boot for Odroid X2/U3/XU3 ======================== 1. Summary ========== -This is a quick instruction for setup Odroid boards based on Exynos4412. -Board config: odroid_config +This is a quick instruction for setup Odroid boards. +Board config: odroid_config for X2/U3 +Board config: odroid-xu3_config for XU3 2. Supported devices ==================== -This U-BOOT config can be used on two boards: +This U-BOOT config can be used on three boards: - Odroid U3 - Odroid X2 with CPU Exynos 4412 rev 2.0 and 2GB of RAM +- Odroid XU3 +with CPU Exynos5422 and 2GB of RAM 3. Boot sequence ================ iROM->BL1->(BL2 + TrustZone)->U-BOOT -This version of U-BOOT doesn't implement SPL but it is required(BL2) -and can be found in "boot.tar.gz" from here: +This version of U-BOOT doesn't implement SPL. So, BL1, BL2, and TrustZone +binaries are needed to boot up. + +<< X2/U3 >> +It can be found in "boot.tar.gz" from here: http://dev.odroid.com/projects/4412boot/wiki/FrontPage?action=download&value=boot.tar.gz or here: http://odroid.in/guides/ubuntu-lfs/boot.tar.gz +<< XU3 >> +It can be downloaded from: +https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel + + 4. Boot media layout ==================== The table below shows SD/eMMC cards layout for U-boot. @@ -35,18 +46,20 @@ The block offset is starting from 0 and the block size is 512B. | Bl2 | 31 | 30 | 1 (boot) | | U-boot | 63 | 62 | 1 (boot) | | Tzsw | 2111 | 2110 | 1 (boot) | -| Uboot Env | 2500 | 2500 | 0 (user) | +| Uboot Env | 2560 | 2560 | 0 (user) | ------------------------------------- 5. Prepare the SD boot card - with SD card reader ================================================= To prepare bootable media you need boot binaries provided by hardkernel. -File "boot.tar.gz" (link in point 3.) contains: -- E4412_S.bl1.HardKernel.bin -- E4412_S.tzsw.signed.bin -- bl2.signed.bin +From the downloaded files, You can find: +- bl1.bin +- tzsw.bin +- bl2.bin - sd_fusing.sh - u-boot.bin +(The file names can be slightly different, but you can distinguish what they are +without problem) This is all you need to boot this board. But if you want to use your custom u-boot then you need to change u-boot.bin with your own u-boot binary* @@ -56,7 +69,7 @@ and run the script "sd_fusing.sh" - this script is valid only for SD card. The proper binary file of current U-boot is u-boot-dtb.bin. quick steps for Linux: -- extract boot.tar.gz +- Download all files from the link at point 3 and extract it if needed. - put any SD card into the SD reader - check the device with "dmesg" - run ./sd_fusing.sh /dev/sdX - where X is SD card device (but not a partition) @@ -66,7 +79,7 @@ Check if Hardkernel U-boot is booting, and next do the same with your U-boot. with a eMMC card reader (boot from eMMC card slot) ===================================================== To boot the device from the eMMC slot you should use a special card reader -which supports eMMC partiion switch. All of the boot binaries are stored +which supports eMMC partition switch. All of the boot binaries are stored on the eMMC boot partition which is normally hidden. The "sd_fusing.sh" script can be used after updating offsets of binaries @@ -81,8 +94,8 @@ But then the device can boot only from the SD card slot. 8. Prepare the boot media using Hardkernel U-boot ================================================= -You can update the U-boot to the custom one if you have an working bootloader -delivered with the board on a eMMC/SD card. Then follow the steps: +You can update the U-boot to the custom one if you have a working bootloader +delivered with the board on the eMMC/SD card. Then follow the steps: - install the android fastboot tool - connect a micro usb cable to the board - on the U-boot prompt, run command: fastboot (as a root) @@ -91,7 +104,7 @@ delivered with the board on a eMMC/SD card. Then follow the steps: 9. Partition layout ==================== -Default U-boot environment is setup for fixed partiion layout. +Default U-boot environment is setup for fixed partition layout. Partition table: MSDOS. Disk layout and files as listed in the table below. ----- ------ ------ ------ -------- --------------------------------- @@ -106,6 +119,7 @@ Partition table: MSDOS. Disk layout and files as listed in the table below. Supported fdt files are: - exynos4412-odroidx2.dtb - exynos4412-odroidu3.dtb +- exynos5422-odroidxu3.dtb Supported kernel files are: - Image.itb @@ -141,3 +155,173 @@ And the boot sequence is: - boot_fit - if "Image.itb" exists - boot_zimg - if "zImage" exists - boot_uimg - if "uImage" exists + +11. USB host support +==================== +NOTE: This section is only for Odroid X2/U3. + +The ethernet can be accessed after starting the USB subsystem in U-Boot. +The adapter does not come with a preconfigured MAC address, and hence it needs +to be set before starting USB. +setenv usbethaddr 02:DE:AD:BE:EF:FF + +Note that in this example a locally managed MAC address is chosen. Care should +be taken to make these MAC addresses unique within the same subnet. + +Start the USB subsystem: +Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF +Odroid # usb start +(Re)start USB... +USB0: USB EHCI 1.00 +scanning bus 0 for devices... 4 USB Device(s) found + scanning usb for storage devices... 1 Storage Device(s) found + scanning usb for ethernet devices... 1 Ethernet Device(s) found +Odroid # + +Automatic IP assignment: +------------------------ +If the ethernet is connected to a DHCP server (router maybe with DHCP enabled), +then the below will automatically assign an ip address through DHCP. +setenv autoload no +dhcp + +Odroid # setenv autoload no +Odroid # dhcp +Waiting for Ethernet connection... done. +BOOTP broadcast 1 +DHCP client bound to address 192.168.1.10 (524 ms) +Odroid # + +Note that this automatically sets the many IP address related variables in +U-Boot that is obtained from the DHCP server. + +Odroid # printenv ipaddr netmask gatewayip dnsip +ipaddr=192.168.1.10 +netmask=255.255.255.0 +gatewayip=192.168.1.1 +dnsip=192.168.1.1 + +Ping example: +The ping command can be used a test to check connectivity. In this example, +192.168.1.27 is a pingable server in the network. +Odroid # ping 192.168.1.27 +Waiting for Ethernet connection... done. +Using sms0 device +host 192.168.1.27 is alive +Odroid # + +Static IP assignment: +--------------------- +In the case where there are no DHCP servers in the network, or you want to +set the IP address statically, it can be done by: +Odroid # setenv ipaddr 192.168.1.10 +Odroid # ping 192.168.1.27 +Waiting for Ethernet connection... done. +Using sms0 device +host 192.168.1.27 is alive + +TFTP booting: +------------- +Say there exists a tftp server in the network with address 192.168.1.27 and +it serves a kernel image (zImage.3.17) and a DTB blob (exynos4412-odroidu3.dtb) +that needs to be loaded and booted. It can be accomplished as below: +(Assumes that you have setenv usbethaddr, and have not set autoload to no) + +Odroid # setenv serverip 192.168.1.27 +Odroid # tftpboot 0x40080000 zImage.3.17 +Waiting for Ethernet connection... done. +Using sms0 device +TFTP from server 192.168.1.27; our IP address is 192.168.1.10 +Filename 'zImage.3.17'. +Load address: 0x40080000 +Loading: ################################################################# + ################################################################# + ################################################################# + ####################### + 52.7 KiB/s +done +Bytes transferred = 3194200 (30bd58 hex) +Odroid # tftpboot 0x42000000 exynos4412-odroidu3.dtb +Waiting for Ethernet connection... done. +Using sms0 device +TFTP from server 192.168.1.27; our IP address is 192.168.1.10 +Filename 'exynos4412-odroidu3.dtb'. +Load address: 0x42000000 +Loading: #### + 40 KiB/s +done +Bytes transferred = 46935 (b757 hex) +Odroid # printenv bootargs +bootargs=Please use defined boot +Odroid # setenv bootargs console=ttySAC1,115200n8 root=/dev/mmcblk0p2 rootwait +Odroid # bootz 40080000 - 42000000 +Kernel image @ 0x40080000 [ 0x000000 - 0x30bd58 ] +## Flattened Device Tree blob at 42000000 + Booting using the fdt blob at 0x42000000 + Loading Device Tree to 4fff1000, end 4ffff756 ... OK + +Starting kernel ... + +[ 0.000000] Booting Linux on physical CPU 0xa00 +... etc ... + +In the above example you can substitute 'dhcp' for 'tftpboot' as well. + +USB Storage booting: +-------------------- +Similarly we can use the USB storage to load the kernel image/initrd/fdt etc +and boot. For this example, there is a USB drive plugged in. It has a FAT +1st partition and an EXT 2nd partition. Using the generic FS (ls/load) makes +it even easier to work with FAT/EXT file systems. +For this example the second EXT partition is used for booting and as rootfs. +The boot files - kernel and the dtb are present in the /boot directory of the +second partition. + +Odroid # usb start +(Re)start USB... +USB0: USB EHCI 1.00 +scanning bus 0 for devices... 4 USB Device(s) found + scanning usb for storage devices... 1 Storage Device(s) found + scanning usb for ethernet devices... +Error: sms0 address not set. <----- Note the error as usbethaddr +Warning: failed to set MAC address <----- is not set. +1 Ethernet Device(s) found +Odroid # usb part 0 + +Partition Map for USB device 0 -- Partition Type: DOS + +Part Start Sector Num Sectors UUID Type + 1 3072 263168 000c4046-01 06 + 2 266240 13457408 000c4046-02 83 + +Odroid # ls usb 0:2 /boot + 4096 . + 4096 .. + 353 boot.scr + 281 boot.txt + 101420 config-3.8.13.23 + 2127254 initrd.img-3.8.13.23 + 2194825 uInitrd + 2194825 uInitrd-3.8.13.23 + 2453112 zImage + 101448 config-3.8.13.26 + 2127670 uInitrd-3.8.13.26 + 2127606 initrd.img-3.8.13.26 + 3194200 zImage.3.17 <--- Kernel + 46935 exynos4412-odroidu3.dtb <--- DTB +Odroid # load usb 0:2 40080000 /boot/zImage.3.17 +3194200 bytes read in 471 ms (6.5 MiB/s) +Odroid # load usb 0:2 42000000 /boot/exynos4412-odroidu3.dtb +46935 bytes read in 233 ms (196.3 KiB/s) +Odroid # setenv bootargs console=ttySAC1,115200n8 root=/dev/sda2 rootwait +Odroid # bootz 40080000 - 42000000 +Kernel image @ 0x40080000 [ 0x000000 - 0x30bd58 ] +## Flattened Device Tree blob at 42000000 + Booting using the fdt blob at 0x42000000 + Loading Device Tree to 4fff1000, end 4ffff756 ... OK + +Starting kernel ... + +[ 0.000000] Booting Linux on physical CPU 0xa00 + +Please refer to README.usb for additional information.