X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=doc%2FREADME.rockchip;h=12fec38139c827a2d4511b97a1694984d473ce15;hb=0d7f1ae0fe6c0d9af2c0208aab4843ec3fdfaf52;hp=43cafc7bd6a4cec8a1669d907c98c33cce6ebdfe;hpb=0675f992dbf4a785a05a1baf149c2bce6aa5fe90;p=u-boot

diff --git a/doc/README.rockchip b/doc/README.rockchip
index 43cafc7bd6..12fec38139 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -36,15 +36,17 @@ You will need:
 Building
 ========
 
-At present seven RK3288 boards are supported:
+At present nine RK3288 boards are supported:
 
    - EVB RK3288 - use evb-rk3288 configuration
    - Fennec RK3288 - use fennec-rk3288 configuration
    - Firefly RK3288 - use firefly-rk3288 configuration
    - Hisense Chromebook - use chromebook_jerry configuration
-   - Miniarm RK3288 - use miniarm-rk3288 configuration
+   - MiQi RK3288 - use miqi-rk3288 configuration
+   - phyCORE-RK3288 RDK - use phycore-rk3288 configuration
    - PopMetal RK3288 - use popmetal-rk3288 configuration
    - Radxa Rock 2 - use rock2 configuration
+   - Tinker RK3288 - use tinker-rk3288 configuration
 
 Two RK3036 board are supported:
 
@@ -128,7 +130,7 @@ load a second-level bootloader(ie. U-BOOT) as soon as it returns to bootrom.
 Therefore RK3288 has another loading sequence like RK3036. The option of
 U-Boot is controlled with this setting in U-Boot:
 
-	#define CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
+	#define CONFIG_SPL_ROCKCHIP_BACK_TO_BROM
 
 You can create the image via the following operations:
 
@@ -147,6 +149,32 @@ For evb_rk3036 board:
 Note: rk3036 SDMMC and debug uart use the same iomux, so if you boot from SD, the
       debug uart must be disabled
 
+
+Booting from an SD card on RK3188
+=================================
+
+For rk3188 boards the general storage onto the card stays the same as
+described above, but the image creation needs a bit more care.
+
+The bootrom of rk3188 expects to find a small 1kb loader which returns
+control to the bootrom, after which it will load the real loader, which
+can then be up to 29kb in size and does the regular ddr init.
+
+Additionally the rk3188 requires everything the bootrom loads to be
+rc4-encrypted. Except for the very first stage the bootrom always reads
+and decodes 2kb pages, so files should be sized accordingly.
+
+# copy tpl, pad to 1020 bytes and append spl
+cat tpl/u-boot-tpl.bin > tplspl.bin
+truncate -s 1020 tplspl.bin
+cat spl/u-boot-spl.bin >> tplspl.bin
+tools/mkimage -n rk3188 -T rksd -d tplspl.bin out
+
+# truncate, encode and append u-boot.bin
+truncate -s %2048 u-boot.bin
+cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out
+
+
 Using fastboot on rk3288
 ========================
 - Write GPT partition layout to mmc device which fastboot want to use it to