X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=doc%2FREADME.usb;h=05c62c3413c5d827aabe867b715d7080e059bef7;hb=20fccb944b987877b5a372c0d0641cf7aafff066;hp=bc768a3854509a5b773a5a4d93f9735701e9fdd6;hpb=1cad23c5f471d695bed1e3907e30caee3c2a3056;p=u-boot

diff --git a/doc/README.usb b/doc/README.usb
index bc768a3854..05c62c3413 100644
--- a/doc/README.usb
+++ b/doc/README.usb
@@ -1,12 +1,11 @@
+SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2001
  * Denis Peter, MPL AG Switzerland
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
-USB Support for PIP405 and MIP405 (UHCI)
-========================================
+USB Support
+===========
 
 The USB support is implemented on the base of the UHCI Host
 controller.
@@ -125,23 +124,27 @@ bootp
 
 To enable USB Host Ethernet in U-Boot, your platform must of course
 support USB with CONFIG_CMD_USB enabled and working. You will need to
-add some config settings to your board header file:
+add some config settings to your board config:
 
-#define CONFIG_CMD_USB		/* the 'usb' interactive command */
-#define CONFIG_USB_HOST_ETHER	/* Enable USB Ethernet adapters */
+CONFIG_CMD_USB=y		/* the 'usb' interactive command */
+CONFIG_USB_HOST_ETHER=y		/* Enable USB Ethernet adapters */
 
 and one or more of the following for individual adapter hardware:
 
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_MCS7830
-#define CONFIG_USB_ETHER_SMSC95XX
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_LAN75XX=y
+CONFIG_USB_ETHER_LAN78XX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
 
 As with built-in networking, you will also want to enable some network
 commands, for example:
 
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
+CONFIG_CMD_NET=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_DHCP=y
 
 and some bootp options, which tell your board to obtain its subnet,
 gateway IP, host name and boot path from the bootp/dhcp server. These