X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=doc%2FREADME.x86;h=c96a22cb08d8ba4a594c94a136285b5098b0029f;hb=0d7f1ae0fe6c0d9af2c0208aab4843ec3fdfaf52;hp=8025485cf1311f41cc254e49c1fb407841285e8e;hpb=2218b32d88f9b4b4484cea9a8b034ddab0be298b;p=u-boot

diff --git a/doc/README.x86 b/doc/README.x86
index 8025485cf1..c96a22cb08 100644
--- a/doc/README.x86
+++ b/doc/README.x86
@@ -26,6 +26,7 @@ In this case, known as bare mode, from the fact that it runs on the
 are supported:
 
    - Bayley Bay CRB
+   - Cherry Hill CRB
    - Congatec QEVAL 2.0 & conga-QA3/E3845
    - Cougar Canyon 2 CRB
    - Crown Bay CRB
@@ -332,6 +333,35 @@ the default value 0xfffc0000.
 
 ---
 
+Intel Cherry Hill specific instructions for bare mode:
+
+This uses Intel FSP for Braswell platform. Download it from Intel FSP website,
+put the .fd file to the board directory and rename it to fsp.bin.
+
+Extract descriptor.bin and me.bin from the original BIOS on the board using
+ifdtool and put them to the board directory as well.
+
+Note the FSP package for Braswell does not ship a traditional legacy VGA BIOS
+image for the integrated graphics device. Instead a new binary called Video
+BIOS Table (VBT) is shipped. Put it to the board directory and rename it to
+vbt.bin if you want graphics support in U-Boot.
+
+Now you can build U-Boot and obtain u-boot.rom
+
+$ make cherryhill_defconfig
+$ make all
+
+An important note for programming u-boot.rom to the on-board SPI flash is that
+you need make sure the SPI flash's 'quad enable' bit in its status register
+matches the settings in the descriptor.bin, otherwise the board won't boot.
+
+For the on-board SPI flash MX25U6435F, this can be done by writing 0x40 to the
+status register by DediProg in: Config > Modify Status Register > Write Status
+Register(s) > Register1 Value(Hex). This is is a one-time change. Once set, it
+persists in SPI flash part regardless of the u-boot.rom image burned.
+
+---
+
 Intel Galileo instructions for bare mode:
 
 Only one binary blob is needed for Remote Management Unit (RMU) within Intel
@@ -792,11 +822,7 @@ command.
 You can also bake this behaviour into your build by hard-coding the
 environment variables if you add this to minnowmax.h:
 
-#undef CONFIG_BOOTARGS
 #undef CONFIG_BOOTCOMMAND
-
-#define CONFIG_BOOTARGS		\
-	"root=/dev/sda2 ro"
 #define CONFIG_BOOTCOMMAND	\
 	"ext2load scsi 0:2 03000000 /boot/vmlinuz-3.13.0-58-generic; " \
 	"ext2load scsi 0:2 04000000 /boot/initrd.img-3.13.0-58-generic; " \
@@ -805,6 +831,10 @@ environment variables if you add this to minnowmax.h:
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS "boot=zboot 03000000 0 04000000 ${filesize}"
 
+and change CONFIG_BOOTARGS value in configs/minnowmax_defconfig to:
+
+CONFIG_BOOTARGS="root=/dev/sda2 ro"
+
 Test with SeaBIOS
 -----------------
 SeaBIOS [14] is an open source implementation of a 16-bit x86 BIOS. It can run