X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=docs%2Fuserguide;h=816fbc34336e9f2195afac31eba5b83b4731fa85;hb=e89f39158974e4d68491a8dcd471f6ee70f5b46f;hp=4b4dacc858a1c76ce62b024ee756804be9b3ce08;hpb=c815fc798d530aaaac1ab3402ccd47defb7bcc0f;p=i3%2Fi3

diff --git a/docs/userguide b/docs/userguide
index 4b4dacc8..816fbc34 100644
--- a/docs/userguide
+++ b/docs/userguide
@@ -256,8 +256,9 @@ workspace node’s orientation will be changed to +vertical+. The terminal windo
 you moved down is directly attached to the workspace and appears on the bottom
 of the screen. A new (horizontal) container was created to accommodate the
 other two terminal windows. You will notice this when switching to tabbed mode
-(for example). You would end up having one tab called "another container" and
-the other one being the terminal window you moved down.
+(for example). You would end up having one tab with a representation of the split
+container (e.g., "H[urxvt firefox]") and the other one being the terminal window
+you moved down.
 
 [[configuring]]
 == Configuring i3
@@ -319,7 +320,7 @@ and fall back to a working font.
 *Syntax*:
 ------------------------------
 font <X core font description>
-font pango:[family list] [style options] [size]
+font pango:<family list> [<style options>] <size>
 ------------------------------
 
 *Examples*:
@@ -360,8 +361,8 @@ after the keys have been released.
 
 *Syntax*:
 ----------------------------------
-bindsym [--release] [Modifiers+]keysym command
-bindcode [--release] [Modifiers+]keycode command
+bindsym [--release] [<Modifiers>+]<keysym> command
+bindcode [--release] [<Modifiers>+]<keycode> command
 ----------------------------------
 
 *Examples*:
@@ -403,14 +404,17 @@ button in the scope of the clicked container (see <<command_criteria>>). You
 can configure mouse bindings in a similar way to key bindings.
 
 *Syntax*:
-----------------------------------
-bindsym [--release] [--whole-window] [Modifiers+]button[n] command
-----------------------------------
+-------------------------------------------------------------------------------
+bindsym [--release] [--border] [--whole-window] [<Modifiers>+]button<n> command
+-------------------------------------------------------------------------------
 
 By default, the binding will only run when you click on the titlebar of the
-window. If the +--whole-window+ flag is given, it will run when any part of the
-window is clicked. If the +--release+ flag is given, it will run when the mouse
-button is released.
+window. If the +--release+ flag is given, it will run when the mouse button
+is released.
+
+If the +--whole-window+ flag is given, the binding will also run when any part
+of the window is clicked, with the exception of the border. To have a bind run
+when the border is clicked, specify the +--border+ flag.
 
 *Examples*:
 --------------------------------
@@ -447,7 +451,7 @@ ratio will be preserved).
 
 *Syntax*:
 --------------------------------
-floating_modifier <Modifiers>
+floating_modifier <Modifier>
 --------------------------------
 
 *Example*:
@@ -486,9 +490,9 @@ With the +default_orientation+ configuration directive, you can override that
 behavior.
 
 *Syntax*:
-----------------------------------------------
-default_orientation <horizontal|vertical|auto>
-----------------------------------------------
+--------------------------------------------
+default_orientation horizontal|vertical|auto
+--------------------------------------------
 
 *Example*:
 ----------------------------
@@ -499,17 +503,11 @@ default_orientation vertical
 
 This option determines in which mode new containers on workspace level will
 start.
-///////////////////////////////
-See also <<stack-limit>>.
-//////////////////////////////
 
 *Syntax*:
 ---------------------------------------------
-workspace_layout <default|stacking|tabbed>
+workspace_layout default|stacking|tabbed
 ---------------------------------------------
-/////////////////////////////////////////////
-new_container stack-limit <cols|rows> <value>
-/////////////////////////////////////////////
 
 *Example*:
 ---------------------
@@ -519,18 +517,20 @@ workspace_layout tabbed
 === Border style for new windows
 
 This option determines which border style new windows will have. The default is
-"normal". Note that new_float applies only to windows which are starting out as
-floating windows, e.g. dialog windows.
++normal+. Note that new_float applies only to windows which are starting out as
+floating windows, e.g., dialog windows, but not windows that are floated later on.
 
 *Syntax*:
 ---------------------------------------------
-new_window <normal|1pixel|none|pixel>
-new_float <normal|1pixel|none|pixel>
+new_window normal|none|pixel
+new_window normal|pixel <px>
+new_float normal|none|pixel
+new_float normal|pixel <px>
 ---------------------------------------------
 
 *Example*:
 ---------------------
-new_window 1pixel
+new_window pixel
 ---------------------
 
 The "normal" and "pixel" border styles support an optional border width in
@@ -553,9 +553,9 @@ You can hide vertical borders adjacent to the screen edges using
 to waste even two pixels in displayspace. Default is none.
 
 *Syntax*:
-----------------------------
-hide_edge_borders <none|vertical|horizontal|both>
-----------------------------
+-----------------------------------------------
+hide_edge_borders none|vertical|horizontal|both
+-----------------------------------------------
 
 *Example*:
 ----------------------
@@ -564,14 +564,16 @@ hide_edge_borders vertical
 
 === Arbitrary commands for specific windows (for_window)
 
+[[for_window]]
+
 With the +for_window+ command, you can let i3 execute any command when it
 encounters a specific window. This can be used to set windows to floating or to
 change their border style, for example.
 
 *Syntax*:
------------------------------
-for_window <criteria> command
------------------------------
+-------------------------------
+for_window <criteria> <command>
+-------------------------------
 
 *Examples*:
 ------------------------------------------------
@@ -579,7 +581,7 @@ for_window <criteria> command
 for_window [class="XTerm"] floating enable
 
 # Make all urxvts use a 1-pixel border:
-for_window [class="urxvt"] border 1pixel
+for_window [class="urxvt"] border pixel 1
 
 # A less useful, but rather funny example:
 # makes the window floating as soon as I change
@@ -589,6 +591,27 @@ for_window [title="x200: ~/work"] floating enable
 
 The valid criteria are the same as those for commands, see <<command_criteria>>.
 
+=== Don't focus window upon opening
+
+[[no_focus]]
+
+When a new window appears, it will be focused. The +no_focus+ directive allows preventing
+this from happening and can be used in combination with <<command_criteria>>.
+
+Note that this does not apply to all cases, e.g., when feeding data into a running application
+causing it to request being focused. To configure the behavior in such cases, refer to
+<<focus_on_window_activation>>.
+
+*Syntax*:
+-------------------
+no_focus <criteria>
+-------------------
+
+*Example*:
+-------------------------------
+no_focus [window_role="pop-up"]
+-------------------------------
+
 === Variables
 
 As you learned in the section about keyboard bindings, you will have
@@ -597,9 +620,9 @@ yourself some typing and be able to change the modifier you use later,
 variables can be handy.
 
 *Syntax*:
---------------
-set $name value
---------------
+-------------------
+set $<name> <value>
+-------------------
 
 *Example*:
 ------------------------
@@ -635,7 +658,7 @@ considered.
 
 *Syntax*:
 ------------------------------------------------------------
-assign <criteria> [→] workspace
+assign <criteria> [→] [workspace] <workspace>
 ------------------------------------------------------------
 
 *Examples*:
@@ -699,11 +722,15 @@ commands will not run when restarting i3, if you need a command to run
 also when restarting i3 you should use the +exec_always+
 keyword. These commands will be run in order.
 
+See <<command_chaining>> for details on the special meaning of +;+ (semicolon)
+and +,+ (comma): they chain commands together in i3, so you need to use quoted
+strings if they appear in your command.
+
 *Syntax*:
--------------------
-exec [--no-startup-id] command
-exec_always [--no-startup-id] command
--------------------
+---------------------------------------
+exec [--no-startup-id] <command>
+exec_always [--no-startup-id] <command>
+---------------------------------------
 
 *Examples*:
 --------------------------------
@@ -727,9 +754,9 @@ or when starting (e.g., by default it will use 1 for the first screen, 2 for
 the second screen and so on).
 
 *Syntax*:
-----------------------------------
+-------------------------------------
 workspace <workspace> output <output>
-----------------------------------
+-------------------------------------
 
 The 'output' is the name of the RandR output you attach your screen to. On a
 laptop, you might have VGA1 and LVDS1 as output names. You can see the
@@ -749,9 +776,9 @@ workspace "2: vim" output VGA1
 You can change all colors which i3 uses to draw the window decorations.
 
 *Syntax*:
---------------------------------------------
-colorclass border background text indicator
---------------------------------------------
+------------------------------------------------------
+<colorclass> <border> <background> <text> <indicator>
+------------------------------------------------------
 
 Where colorclass can be one of:
 
@@ -773,9 +800,9 @@ windows. This color will be used to paint the window on top of which the client
 will be rendered.
 
 *Syntax*:
------------------------
-client.background color
------------------------
+-------------------------
+client.background <color>
+-------------------------
 
 Only clients that do not cover the whole area of this window expose the color
 used to paint it.
@@ -837,9 +864,9 @@ still be useful inside the currently active window (for example to click on
 links in your browser window).
 
 *Syntax*:
-----------------------------
-focus_follows_mouse <yes|no>
-----------------------------
+--------------------------
+focus_follows_mouse yes|no
+--------------------------
 
 *Example*:
 ----------------------
@@ -857,9 +884,9 @@ be warped. +none+ disables warping entirely, whereas +output+ is the default
 behavior described above.
 
 *Syntax*:
----------------------------
-mouse_warping <output|none>
----------------------------
+-------------------------
+mouse_warping output|none
+-------------------------
 
 *Example*:
 ------------------
@@ -881,9 +908,9 @@ There are three things which are possible to do in this situation:
 3. Leave fullscreen mode.
 
 *Syntax*:
--------------------------------------------------
-popup_during_fullscreen <smart|ignore|leave_fullscreen>
--------------------------------------------------
+-----------------------------------------------------
+popup_during_fullscreen smart|ignore|leave_fullscreen
+-----------------------------------------------------
 
 *Example*:
 ------------------------------
@@ -904,9 +931,9 @@ parent+ to switch to different containers, you can use the
 will always wrap.
 
 *Syntax*:
------------------------------
-force_focus_wrapping <yes|no>
------------------------------
+---------------------------
+force_focus_wrapping yes|no
+---------------------------
 
 *Example*:
 ------------------------
@@ -926,9 +953,9 @@ For people who cannot modify their +~/.xsession+ to add the
 +--force-xinerama+ commandline parameter, a configuration option is provided:
 
 *Syntax*:
------------------------
-force_xinerama <yes|no>
------------------------
+---------------------
+force_xinerama yes|no
+---------------------
 
 *Example*:
 ------------------
@@ -948,9 +975,9 @@ mod+2 because somebody sent you a message. You don’t need to remember where yo
 came from now, you can just press $mod+2 again to switch back to "1: www".
 
 *Syntax*:
---------------------------------------
-workspace_auto_back_and_forth <yes|no>
---------------------------------------
+------------------------------------
+workspace_auto_back_and_forth yes|no
+------------------------------------
 
 *Example*:
 ---------------------------------
@@ -981,6 +1008,76 @@ force_display_urgency_hint <timeout> ms
 force_display_urgency_hint 500 ms
 ---------------------------------
 
+=== Delaying exiting on zero displays
+
+Outputs may disappear momentarily and come back later. For example,
+using a docking station that does not announce the undock (e.g. ACPI Undock 
+event triggered through manually pushing a button before actually ejecting 
+the notebook). During the removal of the notebook from the docking station,
+all outputs disappear momentarily.
+
+To prevent i3 from exiting when no output is available momentarily, you can 
+tell i3 to delay a certain time first and check available outputs again using 
+the +delay_exit_on_zero_displays+ directive. Setting the value to 0 disables 
+this feature.
+
+The default is 500ms.
+
+*Syntax*:
+----------------------------------------
+delay_exit_on_zero_displays <timeout> ms
+----------------------------------------
+
+*Example*:
+----------------------------------
+delay_exit_on_zero_displays 500 ms
+----------------------------------
+
+=== Focus on window activation
+
+[[focus_on_window_activation]]
+
+If a window is activated, e.g., via +google-chrome www.google.com+, it may request
+to take focus. Since this may not preferable, different reactions can be configured.
+
+Note that this may not affect windows that are being opened. To prevent new windows
+from being focused, see <<no_focus>>.
+
+*Syntax*:
+--------------------------------------------------
+focus_on_window_activation smart|urgent|focus|none
+--------------------------------------------------
+
+The different modes will act as follows:
+
+smart::
+    This is the default behavior. If the window requesting focus is on an active
+    workspace, it will receive the focus. Otherwise, the urgency hint will be set.
+urgent::
+    The window will always be marked urgent, but the focus will not be stolen.
+focus::
+    The window will always be focused and not be marked urgent.
+none::
+    The window will neither be focused, nor be marked urgent.
+
+=== Drawing marks on window decoration
+
+If activated, marks on windows are drawn in their window decoration. However,
+any mark starting with an underscore in its name (+_+) will not be drawn even if
+this option is activated.
+
+The default for this option is +yes+.
+
+*Syntax*:
+-----------------
+show_marks yes|no
+-----------------
+
+*Example*:
+--------------
+show_marks yes
+--------------
+
 == Configuring i3bar
 
 The bar at the bottom of your monitor is drawn by a separate process called
@@ -1023,9 +1120,9 @@ The specified command will be passed to +sh -c+, so you can use globbing and
 have to have correct quoting etc.
 
 *Syntax*:
-----------------------
-i3bar_command command
-----------------------
+-----------------------
+i3bar_command <command>
+-----------------------
 
 *Example*:
 -------------------------------------------------
@@ -1042,17 +1139,23 @@ right hand side of the bar. This is useful to display system information like
 your current IP address, battery status or date/time.
 
 The specified command will be passed to +sh -c+, so you can use globbing and
-have to have correct quoting etc.
+have to have correct quoting etc. Note that for signal handling, depending on
+your shell (users of dash(1) are known to be affected), you have to use the
+shell’s exec command so that signals are passed to your program, not to the
+shell.
 
 *Syntax*:
-----------------------
-status_command command
-----------------------
+------------------------
+status_command <command>
+------------------------
 
 *Example*:
 -------------------------------------------------
 bar {
     status_command i3status --config ~/.i3status.conf
+
+    # For dash(1) users who want signal handling to work:
+    status_command exec ~/.bin/my_status_command
 }
 -------------------------------------------------
 
@@ -1088,11 +1191,11 @@ The default mode is dock mode; in hide mode, the default modifier is Mod4 (usual
 the windows key). The default value for the hidden_state is hide.
 
 *Syntax*:
-----------------
-mode <dock|hide|invisible>
-hidden_state <hide|show>
+-------------------------
+mode dock|hide|invisible
+hidden_state hide|show
 modifier <Modifier>
-----------------
+------------------------
 
 *Example*:
 ----------------
@@ -1108,23 +1211,41 @@ Available modifiers are Mod1-Mod5, Shift, Control (see +xmodmap(1)+).
 === Mouse button commands
 
 Specifies a command to run when a button was pressed on i3bar to override the
-default behavior. Currently only the mouse wheel buttons are supported. This is
-useful for disabling the scroll wheel action or running scripts that implement
-custom behavior for these buttons.
+default behavior. This is useful, e.g., for disabling the scroll wheel action
+or running scripts that implement custom behavior for these buttons.
+
+A button is always named +button<n>+, where 1 to 5 are default buttons as follows and higher
+numbers can be special buttons on devices offering more buttons:
+
+button1::
+    Left mouse button.
+button2::
+    Middle mouse button.
+button3::
+    Right mouse button.
+button4::
+    Scroll wheel up.
+button5::
+    Scroll wheel down.
+
+Please note that the old +wheel_up_cmd+ and +wheel_down_cmd+ commands are deprecated
+and will be removed in a future release. We strongly recommend using the more general
++bindsym+ with +button4+ and +button5+ instead.
 
 *Syntax*:
----------------------
-wheel_up_cmd <command>
-wheel_down_cmd <command>
----------------------
+----------------------------
+bindsym button<n> <command>
+----------------------------
 
 *Example*:
----------------------
+---------------------------------------------------------
 bar {
-    wheel_up_cmd nop
-    wheel_down_cmd exec ~/.i3/scripts/custom_wheel_down
+    # disable clicking on workspace buttons
+    bindsym button1 nop
+    # execute custom script when scrolling downwards
+    bindsym button5 exec ~/.i3/scripts/custom_wheel_down
 }
----------------------
+---------------------------------------------------------
 
 === Bar ID
 
@@ -1152,9 +1273,9 @@ This option determines in which edge of the screen i3bar should show up.
 The default is bottom.
 
 *Syntax*:
----------------------
-position <top|bottom>
----------------------
+-------------------
+position top|bottom
+-------------------
 
 *Example*:
 ---------------------
@@ -1207,9 +1328,9 @@ You can configure on which output (monitor) the icons should be displayed or
 you can turn off the functionality entirely.
 
 *Syntax*:
--------------------------
-tray_output <none|primary|output>
--------------------------
+---------------------------------
+tray_output none|primary|<output>
+---------------------------------
 
 *Example*:
 -------------------------
@@ -1219,7 +1340,9 @@ bar {
 }
 
 # show tray icons on the primary monitor
-tray_output primary
+bar {
+    tray_output primary
+}
 
 # show tray icons on the big monitor
 bar {
@@ -1232,6 +1355,23 @@ Note that you might not have a primary output configured yet. To do so, run:
 xrandr --output <output> --primary
 -------------------------
 
+=== Tray padding
+
+The tray is shown on the right-hand side of the bar. By default, a padding of 2
+pixels is used for the upper, lower and right-hand side of the tray area and
+between the individual icons.
+
+*Syntax*:
+-------------------------
+tray_padding <px> [px]
+-------------------------
+
+*Example*:
+-------------------------
+# Obey Fitts's law
+tray_padding 0
+-------------------------
+
 === Font
 
 Specifies the font to be used in the bar. See <<fonts>>.
@@ -1249,6 +1389,23 @@ bar {
 }
 --------------------------------------------------------------
 
+=== Custom separator symbol
+
+Specifies a custom symbol to be used for the separator as opposed to the vertical,
+one pixel thick separator.
+
+*Syntax*:
+-------------------------
+separator_symbol <symbol>
+-------------------------
+
+*Example*:
+------------------------
+bar {
+    separator_symbol ":|:"
+}
+------------------------
+
 === Workspace buttons
 
 Specifies whether workspace buttons should be shown or not. This is useful if
@@ -1257,9 +1414,9 @@ you want to display a statusline-only bar containing additional information.
 The default is to show workspace buttons.
 
 *Syntax*:
---------------------------
-workspace_buttons <yes|no>
---------------------------
+------------------------
+workspace_buttons yes|no
+------------------------
 
 *Example*:
 ------------------------
@@ -1282,9 +1439,9 @@ workspaces to "1:I", "2:II", "3:III", "4:IV", ...
 The default is to display the full name within the workspace button.
 
 *Syntax*:
-----------------------------------
-strip_workspace_numbers <yes|no>
-----------------------------------
+------------------------------
+strip_workspace_numbers yes|no
+------------------------------
 
 *Example*:
 ----------------------------
@@ -1303,9 +1460,9 @@ For an example of a +mode+ definition, see <<resizingconfig>>.
 The default is to show the mode indicator.
 
 *Syntax*:
--------------------------------
-binding_mode_indicator <yes|no>
--------------------------------
+-----------------------------
+binding_mode_indicator yes|no
+-----------------------------
 
 *Example*:
 -----------------------------
@@ -1339,7 +1496,10 @@ inactive_workspace::
 	will be the case for most workspaces.
 urgent_workspace::
 	Border, background and text color for a workspace button when the workspace
-	contains a window with the urgency hint set. Also applies to +mode+ indicators.
+	contains a window with the urgency hint set.
+binding_mode::
+        Border, background and text color for the binding mode indicator. If not used,
+        the colors will be taken from +urgent_workspace+.
 
 *Syntax*:
 ----------------------------------------
@@ -1348,7 +1508,7 @@ colors {
     statusline <color>
     separator <color>
 
-    colorclass <border> <background> <text>
+    <colorclass> <border> <background> <text>
 }
 ----------------------------------------
 
@@ -1364,6 +1524,7 @@ bar {
         active_workspace   #333333 #5f676a #ffffff
         inactive_workspace #333333 #222222 #888888
         urgent_workspace   #2f343a #900000 #ffffff
+        binding_mode       #2f343a #900000 #ffffff
     }
 }
 --------------------------------------
@@ -1380,6 +1541,8 @@ do this is to use the +i3-msg+ utility:
 i3-msg border none
 --------------------------
 
+[[command_chaining]]
+
 Commands can be chained by using +;+ (a semicolon). So, to move a window to a
 specific workspace and immediately switch to that workspace, you can configure
 the following keybinding:
@@ -1424,6 +1587,10 @@ instance::
 	Compares the window instance (the first part of WM_CLASS)
 window_role::
 	Compares the window role (WM_WINDOW_ROLE).
+window_type::
+        Compare the window type (_NET_WM_WINDOW_TYPE). Possible values are
+        +normal+, +dialog+, +utility+, +toolbar+, +splash+, +menu+, +dropdown_menu+,
+        +popup_menu+ and +toolti+.
 id::
 	Compares the X11 window ID, which you can get via +xwininfo+ for example.
 title::
@@ -1432,14 +1599,16 @@ urgent::
 	Compares the urgent state of the window. Can be "latest" or "oldest".
 	Matches the latest or oldest urgent window, respectively.
 	(The following aliases are also available: newest, last, recent, first)
+workspace::
+	Compares the workspace name of the workspace the window belongs to.
 con_mark::
 	Compares the mark set for this container, see <<vim_like_marks>>.
 con_id::
 	Compares the i3-internal container ID, which you can get via the IPC
 	interface. Handy for scripting.
 
-The criteria +class+, +instance+, +role+, +title+ and +mark+ are actually
-regular expressions (PCRE). See +pcresyntax(3)+ or +perldoc perlre+ for
+The criteria +class+, +instance+, +role+, +title+, +workspace+ and +mark+ are
+actually regular expressions (PCRE). See +pcresyntax(3)+ or +perldoc perlre+ for
 information on how to use them.
 
 [[exec]]
@@ -1449,12 +1618,16 @@ information on how to use them.
 What good is a window manager if you can’t actually start any applications?
 The exec command starts an application by passing the command you specify to a
 shell. This implies that you can use globbing (wildcards) and programs will be
-searched in your $PATH.
+searched in your +$PATH+.
+
+See <<command_chaining>> for details on the special meaning of +;+ (semicolon)
+and +,+ (comma): they chain commands together in i3, so you need to use quoted
+strings if they appear in your command.
 
 *Syntax*:
-------------------------------
-exec [--no-startup-id] command
-------------------------------
+--------------------------------
+exec [--no-startup-id] <command>
+--------------------------------
 
 *Example*:
 ------------------------------
@@ -1487,9 +1660,9 @@ orientation will be changed (if it does not have more than one window). Use
 to splith or vice-versa.
 
 *Syntax*:
----------------------------
-split <vertical|horizontal>
----------------------------
+-------------------------
+split vertical|horizontal
+-------------------------
 
 *Example*:
 ------------------------------
@@ -1512,10 +1685,10 @@ Likewise, to make the current window floating (or tiling again) use +floating
 enable+ respectively +floating disable+ (or +floating toggle+):
 
 *Syntax*:
---------------
-layout <default|tabbed|stacking|splitv|splith>
+--------------------------------------------
+layout default|tabbed|stacking|splitv|splith
 layout toggle [split|all]
---------------
+--------------------------------------------
 
 *Examples*:
 --------------
@@ -1536,15 +1709,17 @@ bindsym $mod+f fullscreen toggle
 bindsym $mod+t floating toggle
 --------------
 
-=== Focusing/Moving containers
+[[_focusing_moving_containers]]
 
-To change the focus, use the focus command: +focus left+, +focus right+, +focus
-down+ and +focus up+.
+=== Focusing containers
 
-There are a few special parameters you can use for the focus command:
+To change focus, you can use the +focus+ command. The following options are
+available:
 
+left|right|up|down::
+        Sets focus to the nearest container in the given direction.
 parent::
-	Sets focus to the +Parent Container+ of the current +Container+.
+	Sets focus to the parent container of the current container.
 child::
 	The opposite of +focus parent+, sets the focus to the last focused
 	child container.
@@ -1558,23 +1733,16 @@ output::
 	Followed by a direction or an output name, this will focus the
 	corresponding output.
 
-For moving, use +move left+, +move right+, +move down+ and +move up+.
-
 *Syntax*:
------------------------------------
-focus <left|right|down|up>
-focus <parent|child|floating|tiling|mode_toggle>
-focus output <<left|right|down|up>|output>
-move <left|right|down|up> [<px> px]
-move [absolute] position [[<px> px] [<px> px]|center]
------------------------------------
-
-Note that the amount of pixels you can specify for the +move+ command is only
-relevant for floating containers. The default amount is 10 pixels.
+----------------------------------------------
+focus left|right|down|up
+focus parent|child|floating|tiling|mode_toggle
+focus output left|right|up|down|<output>
+----------------------------------------------
 
 *Examples*:
-----------------------
-# Focus container on the left, bottom, top, right:
+-------------------------------------------------
+# Focus container on the left, bottom, top, right
 bindsym $mod+j focus left
 bindsym $mod+k focus down
 bindsym $mod+l focus up
@@ -1591,8 +1759,33 @@ bindsym $mod+x focus output right
 
 # Focus the big output
 bindsym $mod+x focus output HDMI-2
+-------------------------------------------------
+
+=== Moving containers
 
-# Move container to the left, bottom, top, right:
+Use the +move+ command to move a container.
+
+*Syntax*:
+-----------------------------------------------------
+# Moves the container into the given direction.
+# The optional pixel argument specifies how far the
+# container should be moved if it is floating and
+# defaults to 10 pixels.
+move <left|right|down|up> [<px> px]
+
+# Moves the container either to a specific location
+# or to the center of the screen. If 'absolute' is
+# used, it is moved to the center of all outputs.
+move [absolute] position [[<px> px] [<px> px]|center]
+
+# Moves the container to the current position of the
+# mouse cursor. Only affects floating containers.
+move position mouse
+-----------------------------------------------------
+
+*Examples*:
+-------------------------------------------------------
+# Move container to the left, bottom, top, right
 bindsym $mod+j move left
 bindsym $mod+k move down
 bindsym $mod+l move up
@@ -1602,10 +1795,12 @@ bindsym $mod+semicolon move right
 # move more than the default
 bindsym $mod+j move left 20 px
 
-# Move floating container to the center
-# of all outputs
+# Move floating container to the center of all outputs
 bindsym $mod+c move absolute position center
-----------------------
+
+# Move container to the current position of the cursor
+bindsym $mod+m move position mouse
+-------------------------------------------------------
 
 === Changing (named) workspaces/moving to workspaces
 
@@ -1625,6 +1820,10 @@ container to the next/previous workspace and +move container to workspace curren
 See <<move_to_outputs>> for how to move a container/workspace to a different
 RandR output.
 
+Workspace names are parsed as
+https://developer.gnome.org/pango/stable/PangoMarkupFormat.html[Pango markup]
+by i3bar.
+
 [[back_and_forth]]
 To switch back to the previously focused workspace, use +workspace
 back_and_forth+; likewise, you can move containers to the previously focused
@@ -1632,20 +1831,21 @@ workspace using +move container to workspace back_and_forth+.
 
 *Syntax*:
 -----------------------------------
-workspace <next|prev|next_on_output|prev_on_output>
+workspace next|prev|next_on_output|prev_on_output
 workspace back_and_forth
 workspace <name>
 workspace number <name>
 
 move [window|container] [to] workspace <name>
 move [window|container] [to] workspace number <name>
-move [window|container] [to] workspace <prev|next|current>
+move [window|container] [to] workspace prev|next|current
 -----------------------------------
 
 *Examples*:
 -------------------------
 bindsym $mod+1 workspace 1
 bindsym $mod+2 workspace 2
+bindsym $mod+3 workspace 3:<span foreground="red">vim</span>
 ...
 
 bindsym $mod+Shift+1 move container to workspace 1
@@ -1730,10 +1930,10 @@ To move a container to another RandR output (addressed by names like +LVDS1+ or
 +right+, +up+ or +down+), there are two commands:
 
 *Syntax*:
---------------------------------------------------------
-move container to output <<left|right|down|up>|<output>>
-move workspace to output <<left|right|down|up>|<output>>
---------------------------------------------------------
+----------------------------------------------------
+move container to output left|right|down|up|<output>
+move workspace to output left|right|down|up|<output>
+----------------------------------------------------
 
 *Examples*:
 --------------------------------------------------------
@@ -1745,6 +1945,26 @@ bindsym $mod+x move workspace to output right
 bindsym $mod+x move container to output VGA1
 --------------------------------------------------------
 
+=== Moving containers/workspaces to marks
+
+To move a container to another container with a specific mark (see <<vim_like_marks>>),
+you can use the following command.
+
+The window will be moved right after the marked container in the tree, i.e., it ends up
+in the same position as if you had opened a new window when the marked container was
+focused. If the mark is on a split container, the window will appear as a new child
+after the currently focused child within that container.
+
+*Syntax*:
+------------------------------------
+move window|container to mark <mark>
+------------------------------------
+
+*Example*:
+--------------------------------------------------------
+for_window [instance="tabme"] move window to mark target
+--------------------------------------------------------
+
 [[resizingconfig]]
 
 === Resizing containers/windows
@@ -1753,9 +1973,9 @@ If you want to resize containers/windows using your keyboard, you can use the
 +resize+ command:
 
 *Syntax*:
----------------------------------------------------------
-resize <grow|shrink> <direction> [<px> px [or <ppt> ppt]]
----------------------------------------------------------
+-------------------------------------------------------
+resize grow|shrink <direction> [<px> px [or <ppt> ppt]]
+-------------------------------------------------------
 
 Direction can either be one of +up+, +down+, +left+ or +right+. Or you can be
 less specific and use +width+ or +height+, in which case i3 will take/give
@@ -1834,11 +2054,17 @@ window, you cannot simply bind it to a key.  +i3-input+ is a tool created
 for this purpose: It lets you input a command and sends the command to i3. It
 can also prefix this command and display a custom prompt for the input dialog.
 
+The additional +--toggle+ option will remove the mark if the window already has
+this mark, add it if the window has none or replace the current mark if it has
+another mark.
+
+Refer to +show_marks+ if you don't want marks to be shown in the window decoration.
+
 *Syntax*:
 ------------------------------
-mark identifier
+mark [--toggle] <identifier>
 [con_mark="identifier"] focus
-unmark identifier
+unmark <identifier>
 ------------------------------
 
 *Example (in a terminal)*:
@@ -1863,52 +2089,63 @@ Alternatively, if you do not want to mess with +i3-input+, you could create
 seperate bindings for a specific set of labels and then only use those labels.
 ///////////////////////////////////////////////////////////////////
 
-=== Changing border style
+=== Window title format
 
-To change the border of the current client, you can use +border normal+ to use the normal
-border (including window title), +border 1pixel+ to use a 1-pixel border (no window title)
-and +border none+ to make the client borderless.
+By default, i3 will simply print the X11 window title. Using +title_format+,
+this can be customized by setting the format to the desired output. This
+directive supports
+https://developer.gnome.org/pango/stable/PangoMarkupFormat.html[Pango markup]
+and the following placeholders which will be replaced:
 
-There is also +border toggle+ which will toggle the different border styles.
++%title+::
+    The X11 window title (_NET_WM_NAME or WM_NAME as fallback).
+
+Using the <<for_window>> directive, you can set the title format for any window
+based on <<command_criteria>>.
+
+*Syntax*:
+---------------------
+title_format <format>
+---------------------
 
 *Examples*:
-----------------------------
-bindsym $mod+t border normal
-bindsym $mod+y border 1pixel
-bindsym $mod+u border none
-----------------------------
+-------------------------------------------------------------------------------------
+# give the focused window a prefix
+bindsym $mod+p title_format "Important | %title"
 
-[[stack-limit]]
+# print all window titles bold
+for_window [class=".*"] title_format "<b>%title</b>"
 
-///////////////////////////////////////////////////////////////////////////////
-TODO: not yet implemented
-=== Changing the stack-limit of a container
+# print window titles of firefox windows red
+for_window [class="(?i)firefox"] title_format "<span foreground='red'>%title</span>"
+-------------------------------------------------------------------------------------
 
-If you have a single container with a lot of windows inside it (say, more than
-10), the default layout of a stacking container can get a little unhandy.
-Depending on your screen’s size, you might end up with only half of the title
-lines being actually used, wasting a lot of screen space.
+=== Changing border style
 
-Using the +stack-limit+ command, you can limit the number of rows or columns
-in a stacking container. i3 will create columns or rows (depending on what
-you limited) automatically as needed.
+To change the border of the current client, you can use +border normal+ to use the normal
+border (including window title), +border pixel 1+ to use a 1-pixel border (no window title)
+and +border none+ to make the client borderless.
 
-*Syntax*:
---------------------------------
-stack-limit <cols|rows> <value>
---------------------------------
+There is also +border toggle+ which will toggle the different border styles.
 
-*Examples*:
--------------------
-# I always want to have two window titles in one line
-stack-limit cols 2
+*Syntax*:
+-----------------------------------------------
+border normal|pixel [<n>]
+border none|toggle
 
-# Not more than 5 rows in this stacking container
-stack-limit rows 5
--------------------
+# legacy syntax, equivalent to "border pixel 1"
+border 1pixel
+-----------------------------------------------
 
-image:stacklimit.png[Container limited to two columns]
-///////////////////////////////////////////////////////////////////////////////
+*Examples*:
+----------------------------------------------
+# use window title, but no border
+bindsym $mod+t border normal 0
+# use no window title and a thick border
+bindsym $mod+y border pixel 3
+# use neither window title nor border
+bindsym $mod+u border none
+----------------------------------------------
 
 [[shmlog]]
 
@@ -1924,7 +2161,7 @@ discarded and a new one will be started.
 *Syntax*:
 ------------------------------
 shmlog <size_in_bytes>
-shmlog <on|off|toggle>
+shmlog on|off|toggle
 ------------------------------
 
 *Examples*:
@@ -1945,9 +2182,9 @@ command does not activate shared memory logging (shmlog), and as such is most
 likely useful in combination with the above-described <<shmlog>> command.
 
 *Syntax*:
-------------------------
-debuglog <on|off|toggle>
-------------------------
+----------------------
+debuglog on|off|toggle
+----------------------
 
 *Examples*:
 ------------------------
@@ -2006,6 +2243,27 @@ bindsym $mod+minus scratchpad show
 bindsym mod4+s [title="^Sup ::"] scratchpad show
 ------------------------------------------------
 
+=== Nop
+
+There is a no operation command +nop+ which allows you to override default
+behavior. This can be useful for, e.g., disabling a focus change on clicks with
+the middle mouse button.
+
+The optional +comment+ argument is ignored, but will be printed to the log file
+for debugging purposes.
+
+*Syntax*:
+---------------
+nop [<comment>]
+---------------
+
+*Example*:
+----------------------------------------------
+# Disable focus change for clicks on titlebars
+# with the middle mouse button
+bindsym button2 nop
+----------------------------------------------
+
 === i3bar control
 
 There are two options in the configuration of each i3bar instance that can be