X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2FMakefile;h=64c39d3a3ef9e7d73e659da18924548fc7e3f2ea;hb=f7fda5d1c05e6c86cf60cbd16b7258be56477dfc;hp=c9031f2ce877842fd02d3446d9b1fe159ba0a2e1;hpb=ade766acfb27b1cfe175cd83f22db80dc5b5d789;p=u-boot

diff --git a/drivers/Makefile b/drivers/Makefile
index c9031f2ce8..64c39d3a3e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -2,42 +2,68 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-$(CONFIG_$(SPL_)DM)		+= core/
+obj-$(CONFIG_$(SPL_TPL_)DM)	+= core/
 obj-$(CONFIG_$(SPL_)CLK)	+= clk/
 obj-$(CONFIG_$(SPL_)LED)	+= led/
+obj-$(CONFIG_$(SPL_)PHY)	+= phy/
 obj-$(CONFIG_$(SPL_)PINCTRL)	+= pinctrl/
 obj-$(CONFIG_$(SPL_)RAM)	+= ram/
 
 ifdef CONFIG_SPL_BUILD
 
+obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
+obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
 obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/
 obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
 obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/
 obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
-obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += ddr/marvell/a38x/
-obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += ddr/marvell/axp/
+obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
+obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
 obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
 obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/
-obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
 obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
+obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
 obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
 obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/
-obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/
 obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
+obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
+obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
 obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
 obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/
+obj-$(CONFIG_SPL_PCH_SUPPORT) += pch/
+obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/
+obj-$(CONFIG_SPL_TIMER_SUPPORT) += timer/
 obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
-obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/
+obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/
+obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/
+obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
 obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
 obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
+obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
+obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
+endif
+
+ifdef CONFIG_TPL_BUILD
+
+obj-$(CONFIG_TPL_I2C_SUPPORT) += i2c/
+obj-$(CONFIG_TPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
+obj-$(CONFIG_TPL_MMC_SUPPORT) += mmc/
+obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
+obj-$(CONFIG_TPL_NAND_SUPPORT) += mtd/nand/
+obj-$(CONFIG_TPL_SERIAL_SUPPORT) += serial/
+obj-$(CONFIG_TPL_SPI_FLASH_SUPPORT) += mtd/spi/
+obj-$(CONFIG_TPL_SPI_SUPPORT) += spi/
+
+endif
 
-else
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
 
 obj-y += adc/
 obj-$(CONFIG_DM_DEMO) += demo/
@@ -46,13 +72,19 @@ obj-y += block/
 obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_CPU) += cpu/
 obj-y += crypto/
+obj-y += firmware/
 obj-$(CONFIG_FPGA) += fpga/
 obj-y += hwmon/
 obj-y += misc/
+obj-$(CONFIG_MMC) += mmc/
 obj-y += pcmcia/
 obj-y += dfu/
+obj-$(CONFIG_X86) += pch/
+obj-y += phy/marvell/
 obj-y += rtc/
 obj-y += sound/
+obj-y += spmi/
+obj-y += sysreset/
 obj-y += timer/
 obj-y += tpm/
 obj-y += twserial/
@@ -60,12 +92,15 @@ obj-y += video/
 obj-y += watchdog/
 obj-$(CONFIG_QE) += qe/
 obj-$(CONFIG_U_QE) += qe/
+obj-y += mailbox/
 obj-y += memory/
 obj-y += pwm/
+obj-y += reset/
 obj-y += input/
 # SOC specific infrastructure drivers.
 obj-y += soc/
 obj-$(CONFIG_REMOTEPROC) += remoteproc/
 obj-y += thermal/
 
+obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
 endif