X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2FMakefile;h=a79ff2e6b0065953d8a307a605793fbee6271512;hb=312a10f16bf3e8b68066fa359d4dd6a887b5fd55;hp=dab5c182c2c9d6d253a80e0045de96b2f9de75c1;hpb=390194d43fa4478ddb638164ddb114c979f3e57a;p=u-boot

diff --git a/drivers/Makefile b/drivers/Makefile
index dab5c182c2..a79ff2e6b0 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,6 +1,4 @@
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
+# SPDX-License-Identifier: GPL-2.0+
 
 obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
 obj-$(CONFIG_$(SPL_TPL_)DM) += core/
@@ -20,6 +18,7 @@ obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
 ifndef CONFIG_TPL_BUILD
 ifdef CONFIG_SPL_BUILD
 
+obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
 obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
 obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
@@ -29,13 +28,14 @@ obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
 obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
+obj-$(CONFIG_SPL_RESET_SUPPORT) += reset/
 obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
 obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
 obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
 obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
-obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
 obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/
 obj-$(CONFIG_SPL_PCH_SUPPORT) += pch/
 obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/
@@ -50,6 +50,7 @@ obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
 obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
 obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
+obj-$(CONFIG_SPL_THERMAL) += thermal/
 
 endif
 endif
@@ -70,6 +71,9 @@ obj-y += block/
 obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_CPU) += cpu/
 obj-y += crypto/
+ifneq ($(CONFIG_FASTBOOT_FLASH_MMC_DEV)$(CONFIG_FASTBOOT_FLASH_NAND_DEV),)
+obj-y += fastboot/
+endif
 obj-y += firmware/
 obj-$(CONFIG_FPGA) += fpga/
 obj-y += misc/