X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fblock%2Fmvsata_ide.c;h=a88d0f7f83995dd3465f8becf20869d6aa8051a4;hb=65029492914ea96dec0bfe25a987463a869c72d2;hp=3d6993ac2af21643fd96e5191943afd33f19620d;hpb=7054cfda6501d67b6796fb1b140655fe2b91aed5;p=u-boot

diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c
index 3d6993ac2a..a88d0f7f83 100644
--- a/drivers/block/mvsata_ide.c
+++ b/drivers/block/mvsata_ide.c
@@ -1,7 +1,7 @@
 /*
- * Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr>
+ * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
  *
- * Written-by: Albert ARIBAUD <albert.aribaud@free.fr>
+ * Written-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -33,7 +33,9 @@
 
 /* SATA port registers */
 struct mvsata_port_registers {
-	u32 reserved1[192];
+	u32 reserved0[10];
+	u32 edma_cmd;
+	u32 reserved1[181];
 	/* offset 0x300 : ATA Interface registers */
 	u32 sstatus;
 	u32 serror;
@@ -76,6 +78,7 @@ struct mvsata_port_registers {
  * and for SStatus DETection.
  */
 
+#define MVSATA_EDMA_CMD_ATA_RST		0x00000004
 #define MVSATA_SCONTROL_DET_MASK		0x0000000F
 #define MVSATA_SCONTROL_DET_NONE		0x00000000
 #define MVSATA_SCONTROL_DET_INIT		0x00000001
@@ -115,6 +118,11 @@ static int mvsata_ide_initialize_port(struct mvsata_port_registers *port)
 	u32 status;
 	u32 timeleft = 10000; /* wait at most 10 ms for SATA reset to complete */
 
+	/* Hard reset */
+	writel(MVSATA_EDMA_CMD_ATA_RST, &port->edma_cmd);
+	udelay(25); /* taken from original marvell port */
+	writel(0, &port->edma_cmd);
+
 	/* Set control IPM to 3 (no low power) and DET to 1 (initialize) */
 	control = readl(&port->scontrol);
 	control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_INIT;
@@ -142,23 +150,25 @@ static int mvsata_ide_initialize_port(struct mvsata_port_registers *port)
 
 int ide_preinit(void)
 {
+	int ret = MVSATA_STATUS_TIMEOUT;
 	int status;
+
 	/* Enable ATA port 0 (could be SATA port 0 or 1) if declared */
 #if defined(CONFIG_SYS_ATA_IDE0_OFFSET)
 	status = mvsata_ide_initialize_port(
 		(struct mvsata_port_registers *)
 		(CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET));
-	if (status)
-		return status;
+	if (status == MVSATA_STATUS_OK)
+		ret = MVSATA_STATUS_OK;
 #endif
 	/* Enable ATA port 1 (could be SATA port 0 or 1) if declared */
 #if defined(CONFIG_SYS_ATA_IDE1_OFFSET)
 	status = mvsata_ide_initialize_port(
 		(struct mvsata_port_registers *)
 		(CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE1_OFFSET));
-	if (status)
-		return status;
+	if (status == MVSATA_STATUS_OK)
+		ret = MVSATA_STATUS_OK;
 #endif
-	/* return success if all ports initializations succeeded */
-	return MVSATA_STATUS_OK;
+	/* Return success if at least one port initialization succeeded */
+	return ret;
 }