X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fgpio%2FKconfig;h=b7e4ffb09d691c93934e7b5a3a01cfc9116e712e;hb=e9392b373a81947812220b100249683fbc4ace1e;hp=ffeda9425af13f07b10487e4a3110abff51d562e;hpb=470135be276b2d92c6da464c68839202d4ff0d08;p=u-boot

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index ffeda9425a..b7e4ffb09d 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -80,6 +80,13 @@ config IMX_RGPIO2P
 	help
 	  This driver supports i.MX7ULP Rapid GPIO2P controller.
 
+config HSDK_CREG_GPIO
+	bool "HSDK CREG GPIO griver"
+	depends on DM_GPIO
+	default n
+	help
+	  This driver supports CREG GPIOs on Synopsys HSDK SOC.
+
 config LPC32XX_GPIO
 	bool "LPC32XX GPIO driver"
 	depends on DM
@@ -101,6 +108,11 @@ config MSM_GPIO
 	  - APQ8016
 	  - MSM8916
 
+config MXC_GPIO
+	bool "Freescale/NXP MXC UART driver"
+	help
+	  Support GPIO controllers on various i.MX platforms
+
 config OMAP_GPIO
 	bool "TI OMAP GPIO driver"
 	depends on ARCH_OMAP2PLUS
@@ -135,6 +147,12 @@ config PCF8575_GPIO
 	 Support for PCF8575 I2C 16-bit GPIO expander. Most of these
 	 chips are from NXP and TI.
 
+config RCAR_GPIO
+	bool "Renesas RCar GPIO driver"
+	depends on DM_GPIO && ARCH_RMOBILE
+	help
+	  This driver supports the GPIO banks on Renesas RCar SoCs.
+
 config ROCKCHIP_GPIO
 	bool "Rockchip GPIO driver"
 	depends on DM_GPIO
@@ -165,6 +183,11 @@ config SANDBOX_GPIO_COUNT
 	  of 'anonymous' GPIOs that do not belong to any device or bank.
 	  Select a suitable value depending on your needs.
 
+config XILINX_GPIO
+	bool "Xilinx GPIO driver"
+	help
+	  This config enable the Xilinx GPIO driver for Microblaze.
+
 config CMD_TCA642X
 	bool "tca642x - Command to access tca642x state"
 	help
@@ -211,7 +234,7 @@ config PIC32_GPIO
 
 config STM32F7_GPIO
 	bool "ST STM32 GPIO driver"
-	depends on DM_GPIO && STM32
+	depends on DM_GPIO && (STM32 || ARCH_STM32MP)
 	default y
 	help
 	  Device model driver support for STM32 GPIO controller. It should be
@@ -263,11 +286,11 @@ config DM_PCA953X
 	  Now, max 24 bits chips and PCA953X compatible chips are
 	  supported
 
-config MPC85XX_GPIO
-	bool "Freescale MPC85XX GPIO driver"
+config MPC8XXX_GPIO
+	bool "Freescale MPC8XXX GPIO driver"
 	depends on DM_GPIO
 	help
-	  This driver supports the built-in GPIO controller of MPC85XX CPUs.
+	  This driver supports the built-in GPIO controller of MPC8XXX CPUs.
 	  Each GPIO bank is identified by its own entry in the device tree,
 	  i.e.
 
@@ -285,7 +308,4 @@ config MPC85XX_GPIO
 	  Aside from the standard functions of input/output mode, and output
 	  value setting, the open-drain feature, which can configure individual
 	  GPIOs to work as open-drain outputs, is supported.
-
-	  The driver has been tested on MPC85XX, but it is likely that other
-	  PowerQUICC III devices will work as well.
 endmenu