X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fi2c%2Ffsl_i2c.c;h=2241990f94f5c87a76af7e9933342f28a3506a52;hb=08a1c6258c2a04cead33eac50d96ea89979dcb94;hp=ce646fd7ed16f66bf208bdc9c6ed9979b77d9861;hpb=ef29884b2708a6cce3b77f4ccaeea193d4e02c22;p=u-boot diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index ce646fd7ed..2241990f94 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -1,5 +1,5 @@ /* - * Copyright 2006 Freescale Semiconductor, Inc. + * Copyright 2006,2009 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -26,7 +26,21 @@ #include #include /* HW definitions */ -#define I2C_TIMEOUT (CONFIG_SYS_HZ / 4) +/* The maximum number of microseconds we will wait until another master has + * released the bus. If not defined in the board header file, then use a + * generic value. + */ +#ifndef CONFIG_I2C_MBB_TIMEOUT +#define CONFIG_I2C_MBB_TIMEOUT 100000 +#endif + +/* The maximum number of microseconds we will wait for a read or write + * operation to complete. If not defined in the board header file, then use a + * generic value. + */ +#ifndef CONFIG_I2C_TIMEOUT +#define CONFIG_I2C_TIMEOUT 10000 +#endif #define I2C_READ_BIT 1 #define I2C_WRITE_BIT 0 @@ -42,6 +56,9 @@ DECLARE_GLOBAL_DATA_PTR; #define CONFIG_SYS_SPD_BUS_NUM 0 #endif static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM; +#if defined(CONFIG_I2C_MUX) +static unsigned int i2c_bus_num_mux __attribute__ ((section ("data"))) = 0; +#endif static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED}; @@ -83,29 +100,9 @@ static const struct fsl_i2c *i2c_dev[2] = { */ static const struct { unsigned short divider; -#ifdef __PPC__ - u8 dfsr; -#endif u8 fdr; } fsl_i2c_speed_map[] = { -#ifdef __PPC__ - {160, 1, 32}, {192, 1, 33}, {224, 1, 34}, {256, 1, 35}, - {288, 1, 0}, {320, 1, 1}, {352, 6, 1}, {384, 1, 2}, {416, 6, 2}, - {448, 1, 38}, {480, 1, 3}, {512, 1, 39}, {544, 11, 3}, {576, 1, 4}, - {608, 22, 3}, {640, 1, 5}, {672, 32, 3}, {704, 11, 5}, {736, 43, 3}, - {768, 1, 6}, {800, 54, 3}, {832, 11, 6}, {896, 1, 42}, {960, 1, 7}, - {1024, 1, 43}, {1088, 22, 7}, {1152, 1, 8}, {1216, 43, 7}, {1280, 1, 9}, - {1408, 22, 9}, {1536, 1, 10}, {1664, 22, 10}, {1792, 1, 46}, - {1920, 1, 11}, {2048, 1, 47}, {2176, 43, 11}, {2304, 1, 12}, - {2560, 1, 13}, {2816, 43, 13}, {3072, 1, 14}, {3328, 43, 14}, - {3584, 1, 50}, {3840, 1, 15}, {4096, 1, 51}, {4608, 1, 16}, - {5120, 1, 17}, {6144, 1, 18}, {7168, 1, 54}, {7680, 1, 19}, - {8192, 1, 55}, {9216, 1, 20}, {10240, 1, 21}, {12288, 1, 22}, - {14336, 1, 58}, {15360, 1, 23}, {16384, 1, 59}, {18432, 1, 24}, - {20480, 1, 25}, {24576, 1, 26}, {28672, 1, 62}, {30720, 1, 27}, - {32768, 1, 63}, {36864, 1, 28}, {40960, 1, 29}, {49152, 1, 30}, - {61440, 1, 31}, {-1, 1, 31} -#elif defined(__M68K__) +#ifdef __M68K__ {20, 32}, {22, 33}, {24, 34}, {26, 35}, {28, 0}, {28, 36}, {30, 1}, {32, 37}, {34, 2}, {36, 38}, {40, 3}, {40, 39}, @@ -141,7 +138,6 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev, unsigned int i2c_clk, unsigned int speed) { unsigned short divider = min(i2c_clk / speed, (unsigned short) -1); - unsigned int i; /* * We want to choose an FDR/DFSR that generates an I2C bus speed that @@ -149,23 +145,72 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev, * want the first divider that is equal to or greater than the * calculated divider. */ +#ifdef __PPC__ + u8 dfsr, fdr = 0x31; /* Default if no FDR found */ + /* a, b and dfsr matches identifiers A,B and C respectively in AN2919 */ + unsigned short a, b, ga, gb; + unsigned long c_div, est_div; + +#ifdef CONFIG_FSL_I2C_CUSTOM_DFSR + dfsr = CONFIG_FSL_I2C_CUSTOM_DFSR; +#else + /* Condition 1: dfsr <= 50/T */ + dfsr = (5 * (i2c_clk / 1000)) / 100000; +#endif +#ifdef CONFIG_FSL_I2C_CUSTOM_FDR + fdr = CONFIG_FSL_I2C_CUSTOM_FDR; + speed = i2c_clk / divider; /* Fake something */ +#else + debug("Requested speed:%d, i2c_clk:%d\n", speed, i2c_clk); + if (!dfsr) + dfsr = 1; + + est_div = ~0; + for (ga = 0x4, a = 10; a <= 30; ga++, a += 2) { + for (gb = 0; gb < 8; gb++) { + b = 16 << gb; + c_div = b * (a + ((3*dfsr)/b)*2); + if ((c_div > divider) && (c_div < est_div)) { + unsigned short bin_gb, bin_ga; + + est_div = c_div; + bin_gb = gb << 2; + bin_ga = (ga & 0x3) | ((ga & 0x4) << 3); + fdr = bin_gb | bin_ga; + speed = i2c_clk / est_div; + debug("FDR:0x%.2x, div:%ld, ga:0x%x, gb:0x%x, " + "a:%d, b:%d, speed:%d\n", + fdr, est_div, ga, gb, a, b, speed); + /* Condition 2 not accounted for */ + debug("Tr <= %d ns\n", + (b - 3 * dfsr) * 1000000 / + (i2c_clk / 1000)); + } + } + if (a == 20) + a += 2; + if (a == 24) + a += 4; + } + debug("divider:%d, est_div:%ld, DFSR:%d\n", divider, est_div, dfsr); + debug("FDR:0x%.2x, speed:%d\n", fdr, speed); +#endif + writeb(dfsr, &dev->dfsrr); /* set default filter */ + writeb(fdr, &dev->fdr); /* set bus speed */ +#else + unsigned int i; for (i = 0; i < ARRAY_SIZE(fsl_i2c_speed_map); i++) if (fsl_i2c_speed_map[i].divider >= divider) { u8 fdr; -#ifdef __PPC__ - u8 dfsr; - dfsr = fsl_i2c_speed_map[i].dfsr; -#endif + fdr = fsl_i2c_speed_map[i].fdr; speed = i2c_clk / fsl_i2c_speed_map[i].divider; writeb(fdr, &dev->fdr); /* set bus speed */ -#ifdef __PPC__ - writeb(dfsr, &dev->dfsrr); /* set default filter */ -#endif + break; } - +#endif return speed; } @@ -175,6 +220,12 @@ i2c_init(int speed, int slaveadd) struct fsl_i2c *dev; unsigned int temp; +#ifdef CONFIG_SYS_I2C_INIT_BOARD + /* call board specific i2c bus reset routine before accessing the */ + /* environment, which might be in a chip on that bus. For details */ + /* about this problem see doc/I2C_Edge_Conditions. */ + i2c_init_board(); +#endif dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET); writeb(0, &dev->cr); /* stop I2C controller */ @@ -200,13 +251,14 @@ i2c_init(int speed, int slaveadd) #endif } -static __inline__ int +static int i2c_wait4bus(void) { unsigned long long timeval = get_ticks(); + const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT); while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) { - if ((get_ticks() - timeval) > usec2ticks(I2C_TIMEOUT)) + if ((get_ticks() - timeval) > timeout) return -1; } @@ -218,11 +270,14 @@ i2c_wait(int write) { u32 csr; unsigned long long timeval = get_ticks(); + const unsigned long long timeout = usec2ticks(CONFIG_I2C_TIMEOUT); do { csr = readb(&i2c_dev[i2c_bus_num]->sr); if (!(csr & I2C_SR_MIF)) continue; + /* Read again to allow register to stabilise */ + csr = readb(&i2c_dev[i2c_bus_num]->sr); writeb(0x0, &i2c_dev[i2c_bus_num]->sr); @@ -242,7 +297,7 @@ i2c_wait(int write) } return 0; - } while ((get_ticks() - timeval) < usec2ticks(I2C_TIMEOUT)); + } while ((get_ticks() - timeval) < timeout); debug("i2c_wait: timed out\n"); return -1; @@ -268,9 +323,6 @@ __i2c_write(u8 *data, int length) { int i; - writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX, - &i2c_dev[i2c_bus_num]->cr); - for (i = 0; i < length; i++) { writeb(data[i], &i2c_dev[i2c_bus_num]->dr); @@ -301,9 +353,10 @@ __i2c_read(u8 *data, int length) writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr); - /* Generate stop on last byte */ + /* Do not generate stop on last byte */ if (i == length - 1) - writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr); + writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX, + &i2c_dev[i2c_bus_num]->cr); data[i] = readb(&i2c_dev[i2c_bus_num]->dr); } @@ -328,6 +381,9 @@ i2c_read(u8 dev, uint addr, int alen, u8 *data, int length) writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); + if (i2c_wait4bus()) /* Wait until STOP */ + debug("i2c_read: wait4bus timed out\n"); + if (i == length) return 0; @@ -347,6 +403,8 @@ i2c_write(u8 dev, uint addr, int alen, u8 *data, int length) } writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); + if (i2c_wait4bus()) /* Wait until STOP */ + debug("i2c_write: wait4bus timed out\n"); if (i == length) return 0; @@ -369,6 +427,19 @@ i2c_probe(uchar chip) int i2c_set_bus_num(unsigned int bus) { +#if defined(CONFIG_I2C_MUX) + if (bus < CONFIG_SYS_MAX_I2C_BUS) { + i2c_bus_num = bus; + } else { + int ret; + + ret = i2x_mux_select_mux(bus); + if (ret) + return ret; + i2c_bus_num = 0; + } + i2c_bus_num_mux = bus; +#else #ifdef CONFIG_SYS_I2C2_OFFSET if (bus > 1) { #else @@ -378,7 +449,7 @@ int i2c_set_bus_num(unsigned int bus) } i2c_bus_num = bus; - +#endif return 0; } @@ -396,7 +467,11 @@ int i2c_set_bus_speed(unsigned int speed) unsigned int i2c_get_bus_num(void) { +#if defined(CONFIG_I2C_MUX) + return i2c_bus_num_mux; +#else return i2c_bus_num; +#endif } unsigned int i2c_get_bus_speed(void)