X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fmmc%2FKconfig;h=a1b21fd1bd0726c91c679a3240a49fc423942567;hb=368e86d9836aa044f2afb233e0445c8e4040b179;hp=ac57867378773f7217c3deea94670a8b75660f82;hpb=b5511d6cb8dc601efc14b8cf607553e3ad4fb5e6;p=u-boot

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index ac57867378..a1b21fd1bd 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -10,9 +10,17 @@ config MMC
 	  If you want MMC/SD/SDIO support, you should say Y here and
 	  also to your specific host controller driver.
 
-config GENERIC_MMC
-	bool "Generic MMC driver framework"
-	default MMC
+config MMC_WRITE
+	bool "support for MMC/SD write operations"
+	depends on MMC
+	default y
+	help
+	  Enable write access to MMC and SD Cards
+
+config MMC_BROKEN_CD
+	bool "Poll for broken card detection case"
+	help
+	  If card  detection feature is broken, just poll to detect.
 
 config DM_MMC
 	bool "Enable MMC controllers using Driver Model"
@@ -24,18 +32,97 @@ config DM_MMC
 	  appear as block devices in U-Boot and can support filesystems such
 	  as EXT4 and FAT.
 
-config DM_MMC_OPS
-	bool "Support MMC controller operations using Driver Model"
-	depends on DM_MMC
-	default y if DM_MMC
+config SPL_DM_MMC
+	bool "Enable MMC controllers using Driver Model in SPL"
+	depends on SPL_DM && DM_MMC
+	default y
 	help
-	  Driver model provides a means of supporting device operations. This
-	  option moves MMC operations under the control of driver model. The
-	  option will be removed as soon as all DM_MMC drivers use it, as it
-	  will the only supported behaviour.
+	  This enables the MultiMediaCard (MMC) uclass which supports MMC and
+	  Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
+	  and non-removable (e.g. eMMC chip) devices are supported. These
+	  appear as block devices in U-Boot and can support filesystems such
+	  as EXT4 and FAT.
 
 if MMC
 
+config ARM_PL180_MMCI
+	bool "ARM AMBA Multimedia Card Interface and compatible support"
+	depends on DM_MMC && OF_CONTROL
+	help
+	  This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
+	  Interface (PL180, PL181 and compatible) support.
+	  If you have an ARM(R) platform with a Multimedia Card slot,
+	  say Y or M here.
+
+config MMC_QUIRKS
+	bool "Enable quirks"
+	default y
+	help
+	  Some cards and hosts may sometimes behave unexpectedly (quirks).
+	  This option enable workarounds to handle those quirks. Some of them
+	  are enabled by default, other may require additionnal flags or are
+	  enabled by the host driver.
+
+config MMC_HW_PARTITIONING
+	bool "Support for HW partitioning command(eMMC)"
+	default y
+	help
+	  This adds a command and an API to do hardware partitioning on eMMC
+	  devices.
+
+config MMC_IO_VOLTAGE
+	bool "Support IO voltage configuration"
+	help
+	  IO voltage configuration allows selecting the voltage level of the IO
+	  lines (not the level of main supply). This is required for UHS
+	  support. For eMMC this not mandatory, but not enabling this option may
+	  prevent the driver of using the faster modes.
+
+config SPL_MMC_IO_VOLTAGE
+	bool "Support IO voltage configuration in SPL"
+	default n
+	help
+	  IO voltage configuration allows selecting the voltage level of the IO
+	  lines (not the level of main supply). This is required for UHS
+	  support. For eMMC this not mandatory, but not enabling this option may
+	  prevent the driver of using the faster modes.
+
+config MMC_UHS_SUPPORT
+	bool "enable UHS support"
+	depends on MMC_IO_VOLTAGE
+	help
+	  The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
+	  cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
+	  frequency can go up to 208MHz (SDR104)
+
+config SPL_MMC_UHS_SUPPORT
+	bool "enable UHS support in SPL"
+	depends on SPL_MMC_IO_VOLTAGE
+	help
+	  The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
+	  cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
+	  frequency can go up to 208MHz (SDR104)
+
+config MMC_HS200_SUPPORT
+	bool "enable HS200 support"
+	help
+	  The HS200 mode is support by some eMMC. The bus frequency is up to
+	  200MHz. This mode requires tuning the IO.
+
+
+config SPL_MMC_HS200_SUPPORT
+	bool "enable HS200 support in SPL"
+	help
+	  The HS200 mode is support by some eMMC. The bus frequency is up to
+	  200MHz. This mode requires tuning the IO.
+
+config MMC_VERBOSE
+	bool "Output more information about the MMC"
+	default y
+	help
+	  Enable the output of more information about the card such as the
+	  operating mode.
+
 config SPL_MMC_TINY
 	bool "Tiny MMC framework in SPL"
 	help
@@ -107,7 +194,7 @@ config MMC_DW_SOCFPGA
 
 config MMC_MESON_GX
 	bool "Meson GX EMMC controller support"
-	depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_MESON
+	depends on DM_MMC && BLK && ARCH_MESON
 	help
 	 Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
 
@@ -138,7 +225,8 @@ config MMC_PCI
 
 config MMC_OMAP_HS
 	bool "TI OMAP High Speed Multimedia Card Interface support"
-	select DM_MMC_OPS if DM_MMC
+	select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
+	select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
 	help
 	  This selects the TI OMAP High Speed Multimedia card Interface.
 	  If you have an omap2plus board with a Multimedia Card slot,
@@ -160,22 +248,37 @@ config MMC_OMAP36XX_PINS
 
 config SH_SDHI
 	bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
-	depends on RMOBILE
+	depends on ARCH_RMOBILE
 	help
 	  Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
 
 config MMC_UNIPHIER
-	bool "UniPhier SD/MMC Host Controller support"
-	depends on ARCH_UNIPHIER
-	depends on BLK && DM_MMC_OPS
+	bool "UniPhier/RCar SD/MMC Host Controller support"
+	depends on ARCH_UNIPHIER || ARCH_RMOBILE
+	depends on BLK && DM_MMC
+	depends on OF_CONTROL
+	help
+	  This selects support for the Matsushita SD/MMC Host Controller on
+	  SocioNext UniPhier and Renesas RCar SoCs.
+
+config MMC_BCM2835
+	bool "BCM2835 family custom SD/MMC Host Controller support"
+	depends on ARCH_BCM283X
+	depends on BLK && DM_MMC
 	depends on OF_CONTROL
+	default y
 	help
-	  This selects support for the SD/MMC Host Controller on UniPhier SoCs.
+	  This selects support for the custom SD host controller in the BCM2835
+	  family of devices.
+
+	  If you have a BCM2835 platform with SD or MMC devices, say Y here.
+
+	  If unsure, say N.
 
 config MMC_SANDBOX
 	bool "Sandbox MMC support"
 	depends on SANDBOX
-	depends on BLK && DM_MMC_OPS && OF_CONTROL
+	depends on BLK && DM_MMC && OF_CONTROL
 	help
 	  This select a dummy sandbox MMC driver. At present this does nothing
 	  other than allow sandbox to be build with MMC support. This
@@ -210,7 +313,7 @@ config MMC_SDHCI_SDMA
 config MMC_SDHCI_ATMEL
 	bool "Atmel SDHCI controller support"
 	depends on ARCH_AT91
-	depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
+	depends on DM_MMC && BLK && ARCH_AT91
 	depends on MMC_SDHCI
 	help
 	  This enables support for the Atmel SDHCI controller, which supports
@@ -234,7 +337,7 @@ config MMC_SDHCI_BCM2835
 
 config MMC_SDHCI_CADENCE
 	bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
-	depends on BLK && DM_MMC_OPS
+	depends on BLK && DM_MMC
 	depends on MMC_SDHCI
 	depends on OF_CONTROL
 	help
@@ -256,7 +359,7 @@ config MMC_SDHCI_KONA
 
 config MMC_SDHCI_MSM
 	bool "Qualcomm SDHCI controller"
-	depends on BLK && DM_MMC_OPS
+	depends on BLK && DM_MMC
 	depends on MMC_SDHCI
 	help
 	  Enables support for SDHCI 2.0 controller present on some Qualcomm
@@ -286,7 +389,7 @@ config MMC_SDHCI_PIC32
 config MMC_SDHCI_ROCKCHIP
 	bool "Arasan SDHCI controller for Rockchip support"
 	depends on ARCH_ROCKCHIP
-	depends on DM_MMC && BLK && DM_MMC_OPS
+	depends on DM_MMC && BLK
 	depends on MMC_SDHCI
 	help
 	  Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
@@ -359,7 +462,7 @@ config MMC_SDHCI_TEGRA
 config MMC_SDHCI_ZYNQ
 	bool "Arasan SDHCI controller support"
 	depends on ARCH_ZYNQ || ARCH_ZYNQMP
-	depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS
+	depends on DM_MMC && OF_CONTROL && BLK
 	depends on MMC_SDHCI
 	help
 	  Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
@@ -372,15 +475,39 @@ config MMC_SUNXI
 	  This selects support for the SD/MMC Host Controller on
 	  Allwinner sunxi SoCs.
 
+config MMC_SUNXI_HAS_NEW_MODE
+	bool
+	depends on MMC_SUNXI
+
 config GENERIC_ATMEL_MCI
 	bool "Atmel Multimedia Card Interface support"
-	depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
+	depends on DM_MMC && BLK && ARCH_AT91
 	help
 	  This enables support for Atmel High Speed Multimedia Card Interface
 	  (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
 	  the SD Memory Card Specification V2.0, the SDIO V2.0 specification
 	  and CE-ATA V1.1.
 
+config STM32_SDMMC2
+	bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
+	depends on DM_MMC && BLK && OF_CONTROL
+	help
+	  This selects support for the SD/MMC controller on STM32H7 SoCs.
+	  If you have a board based on such a SoC and with a SD/MMC slot,
+	  say Y or M here.
+
+config MMC_NDS32
+	bool "Andestech SD/MMC controller support"
+	depends on DM_MMC && OF_CONTROL && BLK && FTSDC010
+	help
+	  This enables support for the Andestech SD/MMM controller, which is
+	  based on Faraday IP.
+
+config FTSDC010
+	bool "Ftsdc010 SD/MMC controller Support"
+	help
+	  This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
+
 endif
 
 config TEGRA124_MMC_DISABLE_EXT_LOOPBACK