X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fmmc%2Fomap_hsmmc.c;h=d3a8b5303d534efbfc68fd412635e5e082798a27;hb=18c83588bc830dbad5a96ca19a85184da58f4d09;hp=afd9b30b513f92b60e74c8419f239e2712ba6958;hpb=ee3a55fdf00b54391e406217e53674449e70d78b;p=u-boot diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index afd9b30b51..d3a8b5303d 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -29,7 +29,8 @@ #include #include #include -#include +#include +#include #include #include #include @@ -38,58 +39,95 @@ #define SYSCTL_SRC (1 << 25) #define SYSCTL_SRD (1 << 26) +struct omap_hsmmc_data { + struct hsmmc *base_addr; + int cd_gpio; + int wp_gpio; +}; + /* If we fail after 1 second wait, something is really bad */ #define MAX_RETRY_MS 1000 static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size); static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, unsigned int siz); -static struct mmc hsmmc_dev[2]; +static struct mmc hsmmc_dev[3]; +static struct omap_hsmmc_data hsmmc_dev_data[3]; + +#if (defined(CONFIG_OMAP_GPIO) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO_SUPPORT)) +static int omap_mmc_setup_gpio_in(int gpio, const char *label) +{ + if (!gpio_is_valid(gpio)) + return -1; + + if (gpio_request(gpio, label) < 0) + return -1; + + if (gpio_direction_input(gpio) < 0) + return -1; + + return gpio; +} + +static int omap_mmc_getcd(struct mmc *mmc) +{ + int cd_gpio = ((struct omap_hsmmc_data *)mmc->priv)->cd_gpio; + return gpio_get_value(cd_gpio); +} + +static int omap_mmc_getwp(struct mmc *mmc) +{ + int wp_gpio = ((struct omap_hsmmc_data *)mmc->priv)->wp_gpio; + return gpio_get_value(wp_gpio); +} +#else +static inline int omap_mmc_setup_gpio_in(int gpio, const char *label) +{ + return -1; +} + +#define omap_mmc_getcd NULL +#define omap_mmc_getwp NULL +#endif #if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER) static void omap4_vmmc_pbias_config(struct mmc *mmc) { u32 value = 0; - struct omap_sys_ctrl_regs *const ctrl = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - - value = readl(&ctrl->control_pbiaslite); + value = readl((*ctrl)->control_pbiaslite); value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ); - writel(value, &ctrl->control_pbiaslite); + writel(value, (*ctrl)->control_pbiaslite); /* set VMMC to 3V */ twl6030_power_mmc_init(); - value = readl(&ctrl->control_pbiaslite); + value = readl((*ctrl)->control_pbiaslite); value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ; - writel(value, &ctrl->control_pbiaslite); + writel(value, (*ctrl)->control_pbiaslite); } #endif -#if defined(CONFIG_OMAP54XX) && defined(CONFIG_TWL6035_POWER) +#if defined(CONFIG_OMAP54XX) && defined(CONFIG_PALMAS_POWER) static void omap5_pbias_config(struct mmc *mmc) { u32 value = 0; - struct omap_sys_ctrl_regs *const ctrl = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - - value = readl(&ctrl->control_pbias); - value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ); - value |= SDCARD_BIAS_HIZ_MODE; - writel(value, &ctrl->control_pbias); - - twl6035_mmc1_poweron_ldo(); - - value = readl(&ctrl->control_pbias); - value &= ~SDCARD_BIAS_HIZ_MODE; - value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ; - writel(value, &ctrl->control_pbias); - - value = readl(&ctrl->control_pbias); - if (value & (1 << 23)) { - value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ); - value |= SDCARD_BIAS_HIZ_MODE; - writel(value, &ctrl->control_pbias); - } + + value = readl((*ctrl)->control_pbias); + value &= ~SDCARD_PWRDNZ; + writel(value, (*ctrl)->control_pbias); + udelay(10); /* wait 10 us */ + value &= ~SDCARD_BIAS_PWRDNZ; + writel(value, (*ctrl)->control_pbias); + + palmas_mmc1_poweron_ldo(); + + value = readl((*ctrl)->control_pbias); + value |= SDCARD_BIAS_PWRDNZ; + writel(value, (*ctrl)->control_pbias); + udelay(150); /* wait 150 us */ + value |= SDCARD_PWRDNZ; + writel(value, (*ctrl)->control_pbias); + udelay(150); /* wait 150 us */ } #endif @@ -138,7 +176,7 @@ unsigned char mmc_board_init(struct mmc *mmc) if (mmc->block_dev.dev == 0) omap4_vmmc_pbias_config(mmc); #endif -#if defined(CONFIG_OMAP54XX) && defined(CONFIG_TWL6035_POWER) +#if defined(CONFIG_OMAP54XX) && defined(CONFIG_PALMAS_POWER) if (mmc->block_dev.dev == 0) omap5_pbias_config(mmc); #endif @@ -177,11 +215,12 @@ void mmc_init_stream(struct hsmmc *mmc_base) static int mmc_init_setup(struct mmc *mmc) { - struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; + struct hsmmc *mmc_base; unsigned int reg_val; unsigned int dsor; ulong start; + mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; mmc_board_init(mmc); writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET, @@ -249,6 +288,30 @@ static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit) mmc_reg_out(&mmc_base->sysctl, bit, bit); + /* + * CMD(DAT) lines reset procedures are slightly different + * for OMAP3 and OMAP4(AM335x,OMAP5,DRA7xx). + * According to OMAP3 TRM: + * Set SRC(SRD) bit in MMCHS_SYSCTL register to 0x1 and wait until it + * returns to 0x0. + * According to OMAP4(AM335x,OMAP5,DRA7xx) TRMs, CMD(DATA) lines reset + * procedure steps must be as follows: + * 1. Initiate CMD(DAT) line reset by writing 0x1 to SRC(SRD) bit in + * MMCHS_SYSCTL register (SD_SYSCTL for AM335x). + * 2. Poll the SRC(SRD) bit until it is set to 0x1. + * 3. Wait until the SRC (SRD) bit returns to 0x0 + * (reset procedure is completed). + */ +#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \ + defined(CONFIG_AM33XX) + if (!(readl(&mmc_base->sysctl) & bit)) { + start = get_timer(0); + while (!(readl(&mmc_base->sysctl) & bit)) { + if (get_timer(0) - start > MAX_RETRY_MS) + return; + } + } +#endif start = get_timer(0); while ((readl(&mmc_base->sysctl) & bit) != 0) { if (get_timer(0) - start > MAX_RETRY_MS) { @@ -262,10 +325,11 @@ static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit) static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) { - struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; + struct hsmmc *mmc_base; unsigned int flags, mmc_stat; ulong start; + mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; start = get_timer(0); while ((readl(&mmc_base->pstate) & (DATI_MASK | CMDI_MASK)) != 0) { if (get_timer(0) - start > MAX_RETRY_MS) { @@ -336,6 +400,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, } writel(cmd->cmdarg, &mmc_base->arg); + udelay(20); /* To fix "No status update" error on eMMC */ writel((cmd->cmdidx << 24) | flags, &mmc_base->cmd); start = get_timer(0); @@ -440,7 +505,7 @@ static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, unsigned int count; /* - * Start Polled Read + * Start Polled Write */ count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size; count /= 4; @@ -489,10 +554,11 @@ static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, static void mmc_set_ios(struct mmc *mmc) { - struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; + struct hsmmc *mmc_base; unsigned int dsor = 0; ulong start; + mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; /* configue bus width */ switch (mmc->bus_width) { case 8: @@ -540,39 +606,57 @@ static void mmc_set_ios(struct mmc *mmc) writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl); } -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max) +int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, + int wp_gpio) { - struct mmc *mmc; - - mmc = &hsmmc_dev[dev_index]; + struct mmc *mmc = &hsmmc_dev[dev_index]; + struct omap_hsmmc_data *priv_data = &hsmmc_dev_data[dev_index]; + uint host_caps_val = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS | + MMC_MODE_HC; sprintf(mmc->name, "OMAP SD/MMC"); mmc->send_cmd = mmc_send_cmd; mmc->set_ios = mmc_set_ios; mmc->init = mmc_init_setup; - mmc->getcd = NULL; + mmc->priv = priv_data; switch (dev_index) { case 0: - mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE; break; #ifdef OMAP_HSMMC2_BASE case 1: - mmc->priv = (struct hsmmc *)OMAP_HSMMC2_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE; +#if (defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \ + defined(CONFIG_DRA7XX)) && defined(CONFIG_HSMMC2_8BIT) + /* Enable 8-bit interface for eMMC on OMAP4/5 or DRA7XX */ + host_caps_val |= MMC_MODE_8BIT; +#endif break; #endif #ifdef OMAP_HSMMC3_BASE case 2: - mmc->priv = (struct hsmmc *)OMAP_HSMMC3_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE; +#if defined(CONFIG_DRA7XX) && defined(CONFIG_HSMMC3_8BIT) + /* Enable 8-bit interface for eMMC on DRA7XX */ + host_caps_val |= MMC_MODE_8BIT; +#endif break; #endif default: - mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE; return 1; } + priv_data->cd_gpio = omap_mmc_setup_gpio_in(cd_gpio, "mmc_cd"); + if (priv_data->cd_gpio != -1) + mmc->getcd = omap_mmc_getcd; + + priv_data->wp_gpio = omap_mmc_setup_gpio_in(wp_gpio, "mmc_wp"); + if (priv_data->wp_gpio != -1) + mmc->getwp = omap_mmc_getwp; + mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; - mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS | - MMC_MODE_HC) & ~host_caps_mask; + mmc->host_caps = host_caps_val & ~host_caps_mask; mmc->f_min = 400000;