X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fmmc%2Fzynq_sdhci.c;h=0fddb420dc0f55745d374ca8ae39d9c7b64907ee;hb=da409ccc4ae62a0bf7111e2f4419fdbfd1ba3d89;hp=e169b774932aa91e91cc95afcf6ef2ed578aaee7;hpb=f3bd72801aade1eb74e153bfa57c26f327571475;p=u-boot diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index e169b77493..0fddb420dc 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -1,61 +1,114 @@ /* - * (C) Copyright 2013 Inc. + * (C) Copyright 2013 - 2015 Xilinx, Inc. * * Xilinx Zynq SD Host Controller Interface * * SPDX-License-Identifier: GPL-2.0+ */ +#include #include +#include #include #include #include #include -#include -int zynq_sdhci_init(phys_addr_t regbase) +DECLARE_GLOBAL_DATA_PTR; + +#ifndef CONFIG_ZYNQ_SDHCI_MIN_FREQ +# define CONFIG_ZYNQ_SDHCI_MIN_FREQ 0 +#endif + +struct arasan_sdhci_plat { + struct mmc_config cfg; + struct mmc mmc; + unsigned int f_max; +}; + +static int arasan_sdhci_probe(struct udevice *dev) { - struct sdhci_host *host = NULL; + struct arasan_sdhci_plat *plat = dev_get_platdata(dev); + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); + struct sdhci_host *host = dev_get_priv(dev); + struct clk clk; + unsigned long clock; + int ret; + + ret = clk_get_by_index(dev, 0, &clk); + if (ret < 0) { + dev_err(dev, "failed to get clock\n"); + return ret; + } - host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host)); - if (!host) { - printf("zynq_sdhci_init: sdhci_host malloc fail\n"); - return 1; + clock = clk_get_rate(&clk); + if (IS_ERR_VALUE(clock)) { + dev_err(dev, "failed to get rate\n"); + return clock; + } + debug("%s: CLK %ld\n", __func__, clock); + + ret = clk_enable(&clk); + if (ret && ret != -ENOSYS) { + dev_err(dev, "failed to enable clock\n"); + return ret; } - host->name = "zynq_sdhci"; - host->ioaddr = (void *)regbase; host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_BROKEN_R1B; - host->version = sdhci_readw(host, SDHCI_HOST_VERSION); - add_sdhci(host, CONFIG_ZYNQ_SDHCI_MAX_FREQ, 52000000 >> 9); +#ifdef CONFIG_ZYNQ_HISPD_BROKEN + host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT; +#endif + + host->max_clk = clock; + + ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max, + CONFIG_ZYNQ_SDHCI_MIN_FREQ); + host->mmc = &plat->mmc; + if (ret) + return ret; + host->mmc->priv = host; + host->mmc->dev = dev; + upriv->mmc = host->mmc; + + return sdhci_probe(dev); +} + +static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev) +{ + struct arasan_sdhci_plat *plat = dev_get_platdata(dev); + struct sdhci_host *host = dev_get_priv(dev); + + host->name = dev->name; + host->ioaddr = (void *)devfdt_get_addr(dev); + + plat->f_max = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), + "max-frequency", CONFIG_ZYNQ_SDHCI_MAX_FREQ); + return 0; } -#if CONFIG_IS_ENABLED(OF_CONTROL) -int zynq_sdhci_of_init(const void *blob) +static int arasan_sdhci_bind(struct udevice *dev) { - int offset = 0; - u32 ret = 0; - phys_addr_t reg; - - debug("ZYNQ SDHCI: Initialization\n"); - - do { - offset = fdt_node_offset_by_compatible(blob, offset, - "arasan,sdhci-8.9a"); - if (offset != -1) { - reg = fdtdec_get_addr(blob, offset, "reg"); - if (reg != FDT_ADDR_T_NONE) { - ret |= zynq_sdhci_init(reg); - } else { - debug("ZYNQ SDHCI: Can't get base address\n"); - return -1; - } - } - } while (offset != -1); - - return ret; + struct arasan_sdhci_plat *plat = dev_get_platdata(dev); + + return sdhci_bind(dev, &plat->mmc, &plat->cfg); } -#endif + +static const struct udevice_id arasan_sdhci_ids[] = { + { .compatible = "arasan,sdhci-8.9a" }, + { } +}; + +U_BOOT_DRIVER(arasan_sdhci_drv) = { + .name = "arasan_sdhci", + .id = UCLASS_MMC, + .of_match = arasan_sdhci_ids, + .ofdata_to_platdata = arasan_sdhci_ofdata_to_platdata, + .ops = &sdhci_ops, + .bind = arasan_sdhci_bind, + .probe = arasan_sdhci_probe, + .priv_auto_alloc_size = sizeof(struct sdhci_host), + .platdata_auto_alloc_size = sizeof(struct arasan_sdhci_plat), +};