X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fmtd%2Fspi%2FKconfig;h=3f7433cbc214b76a7120886f858047d64b51744c;hb=9e957aa4ce959faa89d31bc3ff401cc08bbc1013;hp=ac6d09f9286909e7698aea7994f7cd2eeaec045f;hpb=1733259d25015c28c47990ec11af99b3f62f811c;p=u-boot

diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index ac6d09f928..3f7433cbc2 100644
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -1,3 +1,5 @@
+menu "SPI Flash Support"
+
 config DM_SPI_FLASH
 	bool "Enable Driver Model for SPI flash"
 	depends on DM && DM_SPI
@@ -22,3 +24,108 @@ config SPI_FLASH_SANDBOX
 	  bus (see CONFIG_SANDBOX_SPI) and SPI traffic will be routed to this
 	  device. Typically the contents of the emulated SPI flash device is
 	  stored in a file on the host filesystem.
+
+config SPI_FLASH
+	bool "Legacy SPI Flash Interface support"
+	help
+	  Enable the legacy SPI flash support. This will include basic
+	  standard support for things like probing, read / write, and
+	  erasing through cmd_sf interface.
+
+	  If unsure, say N
+
+config SPI_FLASH_BAR
+	bool "SPI flash Bank/Extended address register support"
+	depends on SPI_FLASH
+	help
+	  Enable the SPI flash Bank/Extended address register support.
+	  Bank/Extended address registers are used to access the flash
+	  which has size > 16MiB in 3-byte addressing.
+
+if SPI_FLASH
+
+config SPI_FLASH_ATMEL
+	bool "Atmel SPI flash support"
+	help
+	  Add support for various Atmel SPI flash chips (AT45xxx and AT25xxx)
+
+config SPI_FLASH_EON
+	bool "EON SPI flash support"
+	help
+	  Add support for various EON SPI flash chips (EN25xxx)
+
+config SPI_FLASH_GIGADEVICE
+	bool "GigaDevice SPI flash support"
+	help
+	  Add support for various GigaDevice SPI flash chips (GD25xxx)
+
+config SPI_FLASH_MACRONIX
+	bool "Macronix SPI flash support"
+	help
+	  Add support for various Macronix SPI flash chips (MX25Lxxx)
+
+config SPI_FLASH_SPANSION
+	bool "Spansion SPI flash support"
+	help
+	  Add support for various Spansion SPI flash chips (S25FLxxx)
+
+config SPI_FLASH_STMICRO
+	bool "STMicro SPI flash support"
+	help
+	  Add support for various STMicro SPI flash chips (M25Pxxx and N25Qxxx)
+
+config SPI_FLASH_SST
+	bool "SST SPI flash support"
+	help
+	  Add support for various SST SPI flash chips (SST25xxx)
+
+config SPI_FLASH_WINBOND
+	bool "Winbond SPI flash support"
+	help
+	  Add support for various Winbond SPI flash chips (W25xxx)
+
+endif
+
+config SPI_FLASH_USE_4K_SECTORS
+	bool "Use small 4096 B erase sectors"
+	depends on SPI_FLASH
+	default y
+	help
+	  Many flash memories support erasing small (4096 B) sectors. Depending
+	  on the usage this feature may provide performance gain in comparison
+	  to erasing whole blocks (32/64 KiB).
+	  Changing a small part of the flash's contents is usually faster with
+	  small sectors. On the other hand erasing should be faster when using
+	  64 KiB block instead of 16 × 4 KiB sectors.
+
+	  Please note that some tools/drivers/filesystems may not work with
+	  4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
+
+config SPI_FLASH_DATAFLASH
+	bool "AT45xxx DataFlash support"
+	depends on SPI_FLASH && DM_SPI_FLASH
+	help
+	  Enable the access for SPI-flash-based AT45xxx DataFlash chips.
+	  DataFlash is a kind of SPI flash. Most AT45 chips have two buffers
+	  in each chip, which may be used for double buffered I/O; but this
+	  driver doesn't (yet) use these for any kind of i/o overlap or prefetching.
+
+	  Sometimes DataFlash is packaged in MMC-format cards, although the
+	  MMC stack can't (yet?) distinguish between MMC and DataFlash
+	  protocols during enumeration.
+
+	  If unsure, say N
+
+config SPI_FLASH_MTD
+	bool "SPI Flash MTD support"
+	depends on SPI_FLASH
+	help
+          Enable the MTD support for spi flash layer, this adapter is for
+	  translating mtd_read/mtd_write commands into spi_flash_read/write
+	  commands. It is not intended to use it within sf_cmd or the SPI
+	  flash subsystem. Such an adapter is needed for subsystems like
+	  UBI which can only operate on top of the MTD layer.
+
+	  If unsure, say N
+
+endmenu # menu "SPI Flash Support"