X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fnet%2FKconfig;h=91b7690972c9fab7eaa97102d20128a4513b1385;hb=d508c82ba90dd92fa3b70875d3419c9d1b5493c0;hp=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391;hpb=3cc83f9d08a80fddf4c1e8e766eff8273f30814c;p=u-boot diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index e69de29bb2..91b7690972 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -0,0 +1,177 @@ +config DM_ETH + bool "Enable Driver Model for Ethernet drivers" + depends on DM + help + Enable driver model for Ethernet. + + The eth_*() interface will be implemented by the UC_ETH class + This is currently implemented in net/eth.c + Look in include/net.h for details. + +config PHYLIB + bool "Ethernet PHY (physical media interface) support" + help + Enable Ethernet PHY (physical media interface) support. + +config RTL8211X_PHY_FORCE_MASTER + bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode" + depends on PHYLIB + help + Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F). + This can work around link stability and data corruption issues on gigabit + links which can occur in slave mode on certain PHYs, e.g. on the + RTL8211C(L). + + Please note that two directly connected devices (i.e. via crossover cable) + will not be able to establish a link between each other if they both force + master mode. Multiple devices forcing master mode when connected by a + network switch do not pose a problem as the switch configures its affected + ports into slave mode. + + This option only affects gigabit links. If you must establish a direct + connection between two devices which both force master mode, try forcing + the link speed to 100MBit/s. + + If unsure, say N. + +menuconfig NETDEVICES + bool "Network device support" + depends on NET + default y if DM_ETH + help + You must select Y to enable any network device support + Generally if you have any networking support this is a given + + If unsure, say Y + +if NETDEVICES + +config ALTERA_TSE + bool "Altera Triple-Speed Ethernet MAC support" + depends on DM_ETH + select PHYLIB + help + This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. + Please find details on the "Triple-Speed Ethernet MegaCore Function + Resource Center" of Altera. + +config E1000 + bool "Intel PRO/1000 Gigabit Ethernet support" + help + This driver supports Intel(R) PRO/1000 gigabit ethernet family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + + +config E1000_SPI_GENERIC + bool "Allow access to the Intel 8257x SPI bus" + depends on E1000 + help + Allow generic access to the SPI bus on the Intel 8257x, for + example with the "sspi" command. + +config E1000_SPI + bool "Enable SPI bus utility code" + depends on E1000 + help + Utility code for direct access to the SPI bus on Intel 8257x. + This does not do anything useful unless you set at least one + of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. + +config CMD_E1000 + bool "Enable the e1000 command" + depends on E1000 + help + This enables the 'e1000' management command for E1000 devices. When + used on devices with SPI support you can reprogram the EEPROM from + U-Boot. + +config ETH_SANDBOX + depends on DM_ETH && SANDBOX + default y + bool "Sandbox: Mocked Ethernet driver" + help + This driver simply responds with fake ARP replies and ping + replies that are used to verify network stack functionality + + This driver is particularly useful in the test/dm/eth.c tests + +config ETH_SANDBOX_RAW + depends on DM_ETH && SANDBOX + default y + bool "Sandbox: Bridge to Linux Raw Sockets" + help + This driver is a bridge from the bottom of the network stack + in U-Boot to the RAW AF_PACKET API in Linux. This allows real + network traffic to be tested from within sandbox. See + board/sandbox/README.sandbox for more details. + +config ETH_DESIGNWARE + bool "Synopsys Designware Ethernet MAC" + select PHYLIB + help + This MAC is present in SoCs from various vendors. It supports + 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to + provide the PHY (physical media interface). + +config MVPP2 + bool "Marvell Armada 375 network interface support" + depends on ARMADA_375 + select PHYLIB + help + This driver supports the network interface units in the + Marvell ARMADA 375 SoC. + +config PCH_GBE + bool "Intel Platform Controller Hub EG20T GMAC driver" + depends on DM_ETH && DM_PCI + select PHYLIB + help + This MAC is present in Intel Platform Controller Hub EG20T. It + supports 10/100/1000 Mbps operation. + +config RTL8139 + bool "Realtek 8139 series Ethernet controller driver" + help + This driver supports Realtek 8139 series fast ethernet family of + PCI chipsets/adapters. + +config RTL8169 + bool "Realtek 8169 series Ethernet controller driver" + help + This driver supports Realtek 8169 series gigabit ethernet family of + PCI/PCIe chipsets/adapters. + +config XILINX_AXIEMAC + depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) + select PHYLIB + select MII + bool "Xilinx AXI Ethernet" + help + This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. + +config XILINX_EMACLITE + depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) + select PHYLIB + select MII + bool "Xilinx Ethernetlite" + help + This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. + +config ZYNQ_GEM + depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP) + select PHYLIB + bool "Xilinx Ethernet GEM" + help + This MAC is present in Xilinx Zynq and ZynqMP SoCs. + +config PIC32_ETH + bool "Microchip PIC32 Ethernet Support" + depends on DM_ETH && MACH_PIC32 + select PHYLIB + help + This driver implements 10/100 Mbps Ethernet and MAC layer for + Microchip PIC32 microcontrollers. + +endif # NETDEVICES