X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fnet%2FKconfig;h=929b9e273ef8dceb7fd348653b143825c950a5e3;hb=a5b9f8c8f07f2a901354a77c6131cb0429881bf8;hp=6905cc02e392454c9f2770b76e8c1d688febd2aa;hpb=596e5782e7bdec7ed275b1204122364a3ab4fbf7;p=u-boot

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6905cc02e3..929b9e273e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -13,6 +13,27 @@ config PHYLIB
 	help
 	  Enable Ethernet PHY (physical media interface) support.
 
+config RTL8211X_PHY_FORCE_MASTER
+	bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode"
+	depends on PHYLIB
+	help
+	  Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F).
+	  This can work around link stability and data corruption issues on gigabit
+	  links which can occur in slave mode on certain PHYs, e.g. on the
+	  RTL8211C(L).
+
+	  Please note that two directly connected devices (i.e. via crossover cable)
+	  will not be able to establish a link between each other if they both force
+	  master mode. Multiple devices forcing master mode when connected by a
+	  network switch do not pose a problem as the switch configures its affected
+	  ports into slave mode.
+
+	  This option only affects gigabit links. If you must establish a direct
+	  connection between two devices which both force master mode, try forcing
+	  the link speed to 100MBit/s.
+
+	  If unsure, say N.
+
 menuconfig NETDEVICES
 	bool "Network device support"
 	depends on NET
@@ -25,6 +46,15 @@ menuconfig NETDEVICES
 
 if NETDEVICES
 
+config AG7XXX
+	bool "Atheros AG7xxx Ethernet MAC support"
+	depends on DM_ETH && ARCH_ATH79
+	select PHYLIB
+	help
+	  This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
+	  present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
+
+
 config ALTERA_TSE
 	bool "Altera Triple-Speed Ethernet MAC support"
 	depends on DM_ETH
@@ -34,6 +64,17 @@ config ALTERA_TSE
 	  Please find details on the "Triple-Speed Ethernet MegaCore Function
 	  Resource Center" of Altera.
 
+config DWC_ETH_QOS
+	bool "Synopsys DWC Ethernet QOS device support"
+	depends on DM_ETH
+	select PHYLIB
+	help
+	  This driver supports the Synopsys Designware Ethernet QOS (Quality
+	  Of Service) IP block. The IP supports many options for bus type,
+	  clocking/reset structure, and feature list. This driver currently
+	  supports the specific configuration used in NVIDIA's Tegra186 chip,
+	  but should be extensible to other combinations quite easily.
+
 config E1000
 	bool "Intel PRO/1000 Gigabit Ethernet support"
 	help
@@ -88,11 +129,32 @@ config ETH_SANDBOX_RAW
 
 config ETH_DESIGNWARE
 	bool "Synopsys Designware Ethernet MAC"
+	select PHYLIB
 	help
 	  This MAC is present in SoCs from various vendors. It supports
 	  100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
 	  provide the PHY (physical media interface).
 
+config ETHOC
+	bool "OpenCores 10/100 Mbps Ethernet MAC"
+	help
+	  This MAC is present in OpenRISC and Xtensa XTFPGA boards.
+
+config FEC_MXC
+	bool "FEC Ethernet controller"
+	depends on MX5 || MX6
+	help
+	  This driver supports the 10/100 Fast Ethernet controller for
+	  NXP i.MX processors.
+
+config MVPP2
+	bool "Marvell Armada 375 network interface support"
+	depends on ARMADA_375
+	select PHYLIB
+	help
+	  This driver supports the network interface units in the
+	  Marvell ARMADA 375 SoC.
+
 config PCH_GBE
 	bool "Intel Platform Controller Hub EG20T GMAC driver"
 	depends on DM_ETH && DM_PCI
@@ -101,10 +163,56 @@ config PCH_GBE
 	  This MAC is present in Intel Platform Controller Hub EG20T. It
 	  supports 10/100/1000 Mbps operation.
 
+config RTL8139
+	bool "Realtek 8139 series Ethernet controller driver"
+	help
+	  This driver supports Realtek 8139 series fast ethernet family of
+	  PCI chipsets/adapters.
+
+config RTL8169
+	bool "Realtek 8169 series Ethernet controller driver"
+	help
+	  This driver supports Realtek 8169 series gigabit ethernet family of
+	  PCI/PCIe chipsets/adapters.
+
+config SUN8I_EMAC
+        bool "Allwinner Sun8i Ethernet MAC support"
+        depends on DM_ETH
+        select PHYLIB
+        help
+          This driver supports the  Allwinner based SUN8I/SUN50I Ethernet MAC.
+	  It can be found in H3/A64/A83T based SoCs and compatible with both
+	  External and Internal PHY's.
+
+config XILINX_AXIEMAC
+	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+	select PHYLIB
+	select MII
+	bool "Xilinx AXI Ethernet"
+	help
+	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
+
+config XILINX_EMACLITE
+	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
+	select PHYLIB
+	select MII
+	bool "Xilinx Ethernetlite"
+	help
+	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
+
 config ZYNQ_GEM
 	depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
+	select PHYLIB
 	bool "Xilinx Ethernet GEM"
 	help
-	  This MAC is presetn in Xilinx Zynq and ZynqMP SoCs.
+	  This MAC is present in Xilinx Zynq and ZynqMP SoCs.
+
+config PIC32_ETH
+	bool "Microchip PIC32 Ethernet Support"
+	depends on DM_ETH && MACH_PIC32
+	select PHYLIB
+	help
+	  This driver implements 10/100 Mbps Ethernet and MAC layer for
+	  Microchip PIC32 microcontrollers.
 
 endif # NETDEVICES