X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fnet%2Ffec_mxc.c;h=b57247032fa85aaa65ec47c9fcf7668a4cd567df;hb=9d86c8dc960c6f4e7e349a41cd2757098da6a92f;hp=1fdd071e3856a2f80667b839c758fe4fcea225ca;hpb=e91004201c4265edf7897c4f8e0c21cd1dce0505;p=u-boot diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 1fdd071e38..b57247032f 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -5,25 +5,13 @@ * (C) Copyright 2007 Pengutronix, Sascha Hauer * (C) Copyright 2007 Pengutronix, Juergen Beisert * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include +#include #include #include "fec_mxc.h" @@ -31,23 +19,50 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; +/* + * Timeout the transfer after 5 mS. This is usually a bit more, since + * the code in the tightloops this timeout is used in adds some overhead. + */ +#define FEC_XFER_TIMEOUT 5000 + +/* + * The standard 32-byte DMA alignment does not work on mx6solox, which requires + * 64-byte alignment in the DMA RX FEC buffer. + * Introduce the FEC_DMA_RX_MINALIGN which can cover mx6solox needs and also + * satisfies the alignment on other SoCs (32-bytes) + */ +#define FEC_DMA_RX_MINALIGN 64 + #ifndef CONFIG_MII #error "CONFIG_MII has to be defined!" #endif -#ifndef CONFIG_FEC_XCV_TYPE -#define CONFIG_FEC_XCV_TYPE MII100 +#ifndef CONFIG_FEC_XCV_TYPE +#define CONFIG_FEC_XCV_TYPE MII100 #endif /* * The i.MX28 operates with packets in big endian. We need to swap them before * sending and after receiving. */ -#ifdef CONFIG_MX28 -#define CONFIG_FEC_MXC_SWAP_PACKET +#ifdef CONFIG_MX28 +#define CONFIG_FEC_MXC_SWAP_PACKET +#endif + +#define RXDESC_PER_CACHELINE (ARCH_DMA_MINALIGN/sizeof(struct fec_bd)) + +/* Check various alignment issues at compile time */ +#if ((ARCH_DMA_MINALIGN < 16) || (ARCH_DMA_MINALIGN % 16 != 0)) +#error "ARCH_DMA_MINALIGN must be multiple of 16!" +#endif + +#if ((PKTALIGN < ARCH_DMA_MINALIGN) || \ + (PKTALIGN % ARCH_DMA_MINALIGN != 0)) +#error "PKTALIGN must be multiple of ARCH_DMA_MINALIGN!" #endif #undef DEBUG @@ -59,7 +74,7 @@ struct nbuf { uint8_t head[16]; /**< MAC header(6 + 6 + 2) + 2(aligned) */ }; -#ifdef CONFIG_FEC_MXC_SWAP_PACKET +#ifdef CONFIG_FEC_MXC_SWAP_PACKET static void swap_packet(uint32_t *packet, int length) { int i; @@ -116,15 +131,19 @@ static int fec_mdio_read(struct ethernet_regs *eth, uint8_t phyAddr, return val; } -static void fec_mii_setspeed(struct fec_priv *fec) +static void fec_mii_setspeed(struct ethernet_regs *eth) { /* * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock * and do not drop the Preamble. */ - writel((((imx_get_fecclk() / 1000000) + 2) / 5) << 1, - &fec->eth->mii_speed); - debug("%s: mii_speed %08x\n", __func__, readl(&fec->eth->mii_speed)); + register u32 speed = DIV_ROUND_UP(imx_get_fecclk(), 5000000); +#ifdef FEC_QUIRK_ENET_MAC + speed--; +#endif + speed <<= 1; + writel(speed, ð->mii_speed); + debug("%s: mii_speed %08x\n", __func__, readl(ð->mii_speed)); } static int fec_mdio_write(struct ethernet_regs *eth, uint8_t phyAddr, @@ -161,13 +180,14 @@ static int fec_mdio_write(struct ethernet_regs *eth, uint8_t phyAddr, return 0; } -int fec_phy_read(struct mii_dev *bus, int phyAddr, int dev_addr, int regAddr) +static int fec_phy_read(struct mii_dev *bus, int phyAddr, int dev_addr, + int regAddr) { return fec_mdio_read(bus->priv, phyAddr, regAddr); } -int fec_phy_write(struct mii_dev *bus, int phyAddr, int dev_addr, int regAddr, - u16 data) +static int fec_phy_write(struct mii_dev *bus, int phyAddr, int dev_addr, + int regAddr, u16 data) { return fec_mdio_write(bus->priv, phyAddr, regAddr, data); } @@ -175,9 +195,10 @@ int fec_phy_write(struct mii_dev *bus, int phyAddr, int dev_addr, int regAddr, #ifndef CONFIG_PHYLIB static int miiphy_restart_aneg(struct eth_device *dev) { + int ret = 0; +#if !defined(CONFIG_FEC_MXC_NO_ANEG) struct fec_priv *fec = (struct fec_priv *)dev->priv; struct ethernet_regs *eth = fec->bus->priv; - int ret = 0; /* * Wake up from sleep if necessary @@ -201,6 +222,7 @@ static int miiphy_restart_aneg(struct eth_device *dev) if (fec->mii_postcall) ret = fec->mii_postcall(fec->phy_id); +#endif return ret; } @@ -235,7 +257,7 @@ static int miiphy_wait_aneg(struct eth_device *dev) static int fec_rx_task_enable(struct fec_priv *fec) { - writel(1 << 24, &fec->eth->r_des_active); + writel(FEC_R_DES_ACTIVE_RDAR, &fec->eth->r_des_active); return 0; } @@ -246,7 +268,7 @@ static int fec_rx_task_disable(struct fec_priv *fec) static int fec_tx_task_enable(struct fec_priv *fec) { - writel(1 << 24, &fec->eth->x_des_active); + writel(FEC_X_DES_ACTIVE_TDAR, &fec->eth->x_des_active); return 0; } @@ -259,43 +281,37 @@ static int fec_tx_task_disable(struct fec_priv *fec) * Initialize receive task's buffer descriptors * @param[in] fec all we know about the device yet * @param[in] count receive buffer count to be allocated - * @param[in] size size of each receive buffer + * @param[in] dsize desired size of each receive buffer * @return 0 on success * - * For this task we need additional memory for the data buffers. And each - * data buffer requires some alignment. Thy must be aligned to a specific - * boundary each (DB_DATA_ALIGNMENT). + * Init all RX descriptors to default values. */ -static int fec_rbd_init(struct fec_priv *fec, int count, int size) +static void fec_rbd_init(struct fec_priv *fec, int count, int dsize) { - int ix; - uint32_t p = 0; - - /* reserve data memory and consider alignment */ - if (fec->rdb_ptr == NULL) - fec->rdb_ptr = malloc(size * count + DB_DATA_ALIGNMENT); - p = (uint32_t)fec->rdb_ptr; - if (!p) { - puts("fec_mxc: not enough malloc memory\n"); - return -ENOMEM; - } - memset((void *)p, 0, size * count + DB_DATA_ALIGNMENT); - p += DB_DATA_ALIGNMENT-1; - p &= ~(DB_DATA_ALIGNMENT-1); - - for (ix = 0; ix < count; ix++) { - writel(p, &fec->rbd_base[ix].data_pointer); - p += size; - writew(FEC_RBD_EMPTY, &fec->rbd_base[ix].status); - writew(0, &fec->rbd_base[ix].data_length); - } + uint32_t size; + uint8_t *data; + int i; + /* - * mark the last RBD to close the ring + * Reload the RX descriptors with default values and wipe + * the RX buffers. */ - writew(FEC_RBD_WRAP | FEC_RBD_EMPTY, &fec->rbd_base[ix - 1].status); + size = roundup(dsize, ARCH_DMA_MINALIGN); + for (i = 0; i < count; i++) { + data = (uint8_t *)fec->rbd_base[i].data_pointer; + memset(data, 0, dsize); + flush_dcache_range((uint32_t)data, (uint32_t)data + size); + + fec->rbd_base[i].status = FEC_RBD_EMPTY; + fec->rbd_base[i].data_length = 0; + } + + /* Mark the last RBD to close the ring. */ + fec->rbd_base[i - 1].status = FEC_RBD_WRAP | FEC_RBD_EMPTY; fec->rbd_index = 0; - return 0; + flush_dcache_range((unsigned)fec->rbd_base, + (unsigned)fec->rbd_base + size); } /** @@ -312,9 +328,15 @@ static int fec_rbd_init(struct fec_priv *fec, int count, int size) */ static void fec_tbd_init(struct fec_priv *fec) { - writew(0x0000, &fec->tbd_base[0].status); - writew(FEC_TBD_WRAP, &fec->tbd_base[1].status); + unsigned addr = (unsigned)fec->tbd_base; + unsigned size = roundup(2 * sizeof(struct fec_bd), + ARCH_DMA_MINALIGN); + + memset(fec->tbd_base, 0, size); + fec->tbd_base[0].status = 0; + fec->tbd_base[1].status = FEC_TBD_WRAP; fec->tbd_index = 0; + flush_dcache_range(addr, addr + size); } /** @@ -324,16 +346,10 @@ static void fec_tbd_init(struct fec_priv *fec) */ static void fec_rbd_clean(int last, struct fec_bd *pRbd) { - /* - * Reset buffer descriptor as empty - */ + unsigned short flags = FEC_RBD_EMPTY; if (last) - writew(FEC_RBD_WRAP | FEC_RBD_EMPTY, &pRbd->status); - else - writew(FEC_RBD_EMPTY, &pRbd->status); - /* - * no data in it - */ + flags |= FEC_RBD_WRAP; + writew(flags, &pRbd->status); writew(0, &pRbd->data_length); } @@ -364,19 +380,38 @@ static int fec_set_hwaddr(struct eth_device *dev) return 0; } -static void fec_eth_phy_config(struct eth_device *dev) +/* + * Do initial configuration of the FEC registers + */ +static void fec_reg_setup(struct fec_priv *fec) { -#ifdef CONFIG_PHYLIB - struct fec_priv *fec = (struct fec_priv *)dev->priv; - struct phy_device *phydev; + uint32_t rcntrl; - phydev = phy_connect(fec->bus, fec->phy_id, dev, - PHY_INTERFACE_MODE_RGMII); - if (phydev) { - fec->phydev = phydev; - phy_config(phydev); - } -#endif + /* + * Set interrupt mask register + */ + writel(0x00000000, &fec->eth->imask); + + /* + * Clear FEC-Lite interrupt event register(IEVENT) + */ + writel(0xffffffff, &fec->eth->ievent); + + + /* + * Set FEC-Lite receive control register(R_CNTRL): + */ + + /* Start with frame length = 1518, common for all modes. */ + rcntrl = PKTSIZE << FEC_RCNTRL_MAX_FL_SHIFT; + if (fec->xcv_type != SEVENWIRE) /* xMII modes */ + rcntrl |= FEC_RCNTRL_FCE | FEC_RCNTRL_MII_MODE; + if (fec->xcv_type == RGMII) + rcntrl |= FEC_RCNTRL_RGMII; + else if (fec->xcv_type == RMII) + rcntrl |= FEC_RCNTRL_RMII; + + writel(rcntrl, &fec->eth->r_cntrl); } /** @@ -387,12 +422,25 @@ static int fec_open(struct eth_device *edev) { struct fec_priv *fec = (struct fec_priv *)edev->priv; int speed; + uint32_t addr, size; + int i; debug("fec_open: fec_open(dev)\n"); /* full-duplex, heartbeat disabled */ writel(1 << 2, &fec->eth->x_cntrl); fec->rbd_index = 0; + /* Invalidate all descriptors */ + for (i = 0; i < FEC_RBD_NUM - 1; i++) + fec_rbd_clean(0, &fec->rbd_base[i]); + fec_rbd_clean(1, &fec->rbd_base[i]); + + /* Flush the descriptors into RAM */ + size = roundup(FEC_RBD_NUM * sizeof(struct fec_bd), + ARCH_DMA_MINALIGN); + addr = (uint32_t)fec->rbd_base; + flush_dcache_range(addr, addr + size); + #ifdef FEC_QUIRK_ENET_MAC /* Enable ENET HW endian SWAP */ writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_DBSWAP, @@ -406,7 +454,7 @@ static int fec_open(struct eth_device *edev) */ writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl); -#if defined(CONFIG_MX25) || defined(CONFIG_MX53) +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL) udelay(100); /* * setup the MII gasket for RMII mode @@ -436,14 +484,16 @@ static int fec_open(struct eth_device *edev) #endif #ifdef CONFIG_PHYLIB - if (!fec->phydev) - fec_eth_phy_config(edev); - if (fec->phydev) { + { /* Start up the PHY */ - phy_startup(fec->phydev); + int ret = phy_startup(fec->phydev); + + if (ret) { + printf("Could not initialize PHY %s\n", + fec->phydev->dev->name); + return ret; + } speed = fec->phydev->speed; - } else { - speed = _100BASET; } #else miiphy_wait_aneg(edev); @@ -454,9 +504,7 @@ static int fec_open(struct eth_device *edev) #ifdef FEC_QUIRK_ENET_MAC { u32 ecr = readl(&fec->eth->ecntrl) & ~FEC_ECNTRL_SPEED; - u32 rcr = (readl(&fec->eth->r_cntrl) & - ~(FEC_RCNTRL_RMII | FEC_RCNTRL_RMII_10T)) | - FEC_RCNTRL_RGMII | FEC_RCNTRL_MII_MODE; + u32 rcr = readl(&fec->eth->r_cntrl) & ~FEC_RCNTRL_RMII_10T; if (speed == _1000BASET) ecr |= FEC_ECNTRL_SPEED; else if (speed != _100BASET) @@ -478,69 +526,25 @@ static int fec_open(struct eth_device *edev) static int fec_init(struct eth_device *dev, bd_t* bd) { - uint32_t base; struct fec_priv *fec = (struct fec_priv *)dev->priv; uint32_t mib_ptr = (uint32_t)&fec->eth->rmon_t_drop; - uint32_t rcntrl; int i; /* Initialize MAC address */ fec_set_hwaddr(dev); /* - * reserve memory for both buffer descriptor chains at once - * Datasheet forces the startaddress of each chain is 16 byte - * aligned - */ - if (fec->base_ptr == NULL) - fec->base_ptr = malloc((2 + FEC_RBD_NUM) * - sizeof(struct fec_bd) + DB_ALIGNMENT); - base = (uint32_t)fec->base_ptr; - if (!base) { - puts("fec_mxc: not enough malloc memory\n"); - return -ENOMEM; - } - memset((void *)base, 0, (2 + FEC_RBD_NUM) * - sizeof(struct fec_bd) + DB_ALIGNMENT); - base += (DB_ALIGNMENT-1); - base &= ~(DB_ALIGNMENT-1); - - fec->rbd_base = (struct fec_bd *)base; - - base += FEC_RBD_NUM * sizeof(struct fec_bd); - - fec->tbd_base = (struct fec_bd *)base; - - /* - * Set interrupt mask register - */ - writel(0x00000000, &fec->eth->imask); - - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - writel(0xffffffff, &fec->eth->ievent); - - - /* - * Set FEC-Lite receive control register(R_CNTRL): + * Setup transmit descriptors, there are two in total. */ + fec_tbd_init(fec); - /* Start with frame length = 1518, common for all modes. */ - rcntrl = PKTSIZE << FEC_RCNTRL_MAX_FL_SHIFT; - if (fec->xcv_type == SEVENWIRE) - rcntrl |= FEC_RCNTRL_FCE; - else if (fec->xcv_type == RGMII) - rcntrl |= FEC_RCNTRL_RGMII; - else if (fec->xcv_type == RMII) - rcntrl |= FEC_RCNTRL_RMII; - else /* MII mode */ - rcntrl |= FEC_RCNTRL_FCE | FEC_RCNTRL_MII_MODE; + /* Setup receive descriptors. */ + fec_rbd_init(fec, FEC_RBD_NUM, FEC_MAX_PKT_SIZE); - writel(rcntrl, &fec->eth->r_cntrl); + fec_reg_setup(fec); - if (fec->xcv_type == MII10 || fec->xcv_type == MII100) - fec_mii_setspeed(fec); + if (fec->xcv_type != SEVENWIRE) + fec_mii_setspeed(fec->bus->priv); /* * Set Opcode/Pause Duration Register @@ -566,17 +570,6 @@ static int fec_init(struct eth_device *dev, bd_t* bd) writel((uint32_t)fec->tbd_base, &fec->eth->etdsr); writel((uint32_t)fec->rbd_base, &fec->eth->erdsr); - /* - * Initialize RxBD/TxBD rings - */ - if (fec_rbd_init(fec, FEC_RBD_NUM, FEC_MAX_PKT_SIZE) < 0) { - free(fec->base_ptr); - fec->base_ptr = NULL; - return -ENOMEM; - } - fec_tbd_init(fec); - - #ifndef CONFIG_PHYLIB if (fec->xcv_type != SEVENWIRE) miiphy_restart_aneg(dev); @@ -631,9 +624,13 @@ static void fec_halt(struct eth_device *dev) * @param[in] length Data count in bytes * @return 0 on success */ -static int fec_send(struct eth_device *dev, volatile void* packet, int length) +static int fec_send(struct eth_device *dev, void *packet, int length) { unsigned int status; + uint32_t size, end; + uint32_t addr; + int timeout = FEC_XFER_TIMEOUT; + int ret = 0; /* * This routine transmits one frame. This routine only accepts @@ -650,15 +647,22 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length) } /* - * Setup the transmit buffer - * Note: We are always using the first buffer for transmission, - * the second will be empty and only used to stop the DMA engine + * Setup the transmit buffer. We are always using the first buffer for + * transmission, the second will be empty and only used to stop the DMA + * engine. We also flush the packet to RAM here to avoid cache trouble. */ -#ifdef CONFIG_FEC_MXC_SWAP_PACKET +#ifdef CONFIG_FEC_MXC_SWAP_PACKET swap_packet((uint32_t *)packet, length); #endif + + addr = (uint32_t)packet; + end = roundup(addr + length, ARCH_DMA_MINALIGN); + addr &= ~(ARCH_DMA_MINALIGN - 1); + flush_dcache_range(addr, end); + writew(length, &fec->tbd_base[fec->tbd_index].data_length); - writel((uint32_t)packet, &fec->tbd_base[fec->tbd_index].data_pointer); + writel(addr, &fec->tbd_base[fec->tbd_index].data_pointer); + /* * update BD's status now * This block: @@ -671,27 +675,93 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length) status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; writew(status, &fec->tbd_base[fec->tbd_index].status); + /* + * Flush data cache. This code flushes both TX descriptors to RAM. + * After this code, the descriptors will be safely in RAM and we + * can start DMA. + */ + size = roundup(2 * sizeof(struct fec_bd), ARCH_DMA_MINALIGN); + addr = (uint32_t)fec->tbd_base; + flush_dcache_range(addr, addr + size); + + /* + * Below we read the DMA descriptor's last four bytes back from the + * DRAM. This is important in order to make sure that all WRITE + * operations on the bus that were triggered by previous cache FLUSH + * have completed. + * + * Otherwise, on MX28, it is possible to observe a corruption of the + * DMA descriptors. Please refer to schematic "Figure 1-2" in MX28RM + * for the bus structure of MX28. The scenario is as follows: + * + * 1) ARM core triggers a series of WRITEs on the AHB_ARB2 bus going + * to DRAM due to flush_dcache_range() + * 2) ARM core writes the FEC registers via AHB_ARB2 + * 3) FEC DMA starts reading/writing from/to DRAM via AHB_ARB3 + * + * Note that 2) does sometimes finish before 1) due to reordering of + * WRITE accesses on the AHB bus, therefore triggering 3) before the + * DMA descriptor is fully written into DRAM. This results in occasional + * corruption of the DMA descriptor. + */ + readl(addr + size - 4); + /* * Enable SmartDMA transmit task */ fec_tx_task_enable(fec); /* - * wait until frame is sent . + * Wait until frame is sent. On each turn of the wait cycle, we must + * invalidate data cache to see what's really in RAM. Also, we need + * barrier here. */ - while (readw(&fec->tbd_base[fec->tbd_index].status) & FEC_TBD_READY) { - udelay(1); + while (--timeout) { + if (!(readl(&fec->eth->x_des_active) & FEC_X_DES_ACTIVE_TDAR)) + break; } - debug("fec_send: status 0x%x index %d\n", + + if (!timeout) { + ret = -EINVAL; + goto out; + } + + /* + * The TDAR bit is cleared when the descriptors are all out from TX + * but on mx6solox we noticed that the READY bit is still not cleared + * right after TDAR. + * These are two distinct signals, and in IC simulation, we found that + * TDAR always gets cleared prior than the READY bit of last BD becomes + * cleared. + * In mx6solox, we use a later version of FEC IP. It looks like that + * this intrinsic behaviour of TDAR bit has changed in this newer FEC + * version. + * + * Fix this by polling the READY bit of BD after the TDAR polling, + * which covers the mx6solox case and does not harm the other SoCs. + */ + timeout = FEC_XFER_TIMEOUT; + while (--timeout) { + invalidate_dcache_range(addr, addr + size); + if (!(readw(&fec->tbd_base[fec->tbd_index].status) & + FEC_TBD_READY)) + break; + } + + if (!timeout) + ret = -EINVAL; + +out: + debug("fec_send: status 0x%x index %d ret %i\n", readw(&fec->tbd_base[fec->tbd_index].status), - fec->tbd_index); + fec->tbd_index, ret); /* for next transmission use the other buffer */ if (fec->tbd_index) fec->tbd_index = 0; else fec->tbd_index = 1; - return 0; + return ret; } /** @@ -707,7 +777,9 @@ static int fec_recv(struct eth_device *dev) int frame_length, len = 0; struct nbuf *frame; uint16_t bd_status; - uchar buff[FEC_MAX_PKT_SIZE]; + uint32_t addr, size, end; + int i; + ALLOC_CACHE_ALIGN_BUFFER(uchar, buff, FEC_MAX_PKT_SIZE); /* * Check if any critical events have happened @@ -737,8 +809,23 @@ static int fec_recv(struct eth_device *dev) } /* - * ensure reading the right buffer status + * Read the buffer status. Before the status can be read, the data cache + * must be invalidated, because the data in RAM might have been changed + * by DMA. The descriptors are properly aligned to cachelines so there's + * no need to worry they'd overlap. + * + * WARNING: By invalidating the descriptor here, we also invalidate + * the descriptors surrounding this one. Therefore we can NOT change the + * contents of this descriptor nor the surrounding ones. The problem is + * that in order to mark the descriptor as processed, we need to change + * the descriptor. The solution is to mark the whole cache line when all + * descriptors in the cache line are processed. */ + addr = (uint32_t)rbd; + addr &= ~(ARCH_DMA_MINALIGN - 1); + size = roundup(sizeof(struct fec_bd), ARCH_DMA_MINALIGN); + invalidate_dcache_range(addr, addr + size); + bd_status = readw(&rbd->status); debug("fec_recv: status 0x%x\n", bd_status); @@ -750,10 +837,18 @@ static int fec_recv(struct eth_device *dev) */ frame = (struct nbuf *)readl(&rbd->data_pointer); frame_length = readw(&rbd->data_length) - 4; + /* + * Invalidate data cache over the buffer + */ + addr = (uint32_t)frame; + end = roundup(addr + frame_length, ARCH_DMA_MINALIGN); + addr &= ~(ARCH_DMA_MINALIGN - 1); + invalidate_dcache_range(addr, end); + /* * Fill the buffer and pass it to upper layers */ -#ifdef CONFIG_FEC_MXC_SWAP_PACKET +#ifdef CONFIG_FEC_MXC_SWAP_PACKET swap_packet((uint32_t *)frame->data, frame_length); #endif memcpy(buff, frame->data, frame_length); @@ -765,11 +860,25 @@ static int fec_recv(struct eth_device *dev) (ulong)rbd->data_pointer, bd_status); } + /* - * free the current buffer, restart the engine - * and move forward to the next buffer + * Free the current buffer, restart the engine and move forward + * to the next buffer. Here we check if the whole cacheline of + * descriptors was already processed and if so, we mark it free + * as whole. */ - fec_rbd_clean(fec->rbd_index == (FEC_RBD_NUM - 1) ? 1 : 0, rbd); + size = RXDESC_PER_CACHELINE - 1; + if ((fec->rbd_index & size) == size) { + i = fec->rbd_index - size; + addr = (uint32_t)&fec->rbd_base[i]; + for (; i <= fec->rbd_index ; i++) { + fec_rbd_clean(i == (FEC_RBD_NUM - 1), + &fec->rbd_base[i]); + } + flush_dcache_range(addr, + addr + ARCH_DMA_MINALIGN); + } + fec_rx_task_enable(fec); fec->rbd_index = (fec->rbd_index + 1) % FEC_RBD_NUM; } @@ -778,11 +887,89 @@ static int fec_recv(struct eth_device *dev) return len; } -static int fec_probe(bd_t *bd, int dev_id, int phy_id, uint32_t base_addr) +static void fec_set_dev_name(char *dest, int dev_id) +{ + sprintf(dest, (dev_id == -1) ? "FEC" : "FEC%i", dev_id); +} + +static int fec_alloc_descs(struct fec_priv *fec) +{ + unsigned int size; + int i; + uint8_t *data; + + /* Allocate TX descriptors. */ + size = roundup(2 * sizeof(struct fec_bd), ARCH_DMA_MINALIGN); + fec->tbd_base = memalign(ARCH_DMA_MINALIGN, size); + if (!fec->tbd_base) + goto err_tx; + + /* Allocate RX descriptors. */ + size = roundup(FEC_RBD_NUM * sizeof(struct fec_bd), ARCH_DMA_MINALIGN); + fec->rbd_base = memalign(ARCH_DMA_MINALIGN, size); + if (!fec->rbd_base) + goto err_rx; + + memset(fec->rbd_base, 0, size); + + /* Allocate RX buffers. */ + + /* Maximum RX buffer size. */ + size = roundup(FEC_MAX_PKT_SIZE, FEC_DMA_RX_MINALIGN); + for (i = 0; i < FEC_RBD_NUM; i++) { + data = memalign(FEC_DMA_RX_MINALIGN, size); + if (!data) { + printf("%s: error allocating rxbuf %d\n", __func__, i); + goto err_ring; + } + + memset(data, 0, size); + + fec->rbd_base[i].data_pointer = (uint32_t)data; + fec->rbd_base[i].status = FEC_RBD_EMPTY; + fec->rbd_base[i].data_length = 0; + /* Flush the buffer to memory. */ + flush_dcache_range((uint32_t)data, (uint32_t)data + size); + } + + /* Mark the last RBD to close the ring. */ + fec->rbd_base[i - 1].status = FEC_RBD_WRAP | FEC_RBD_EMPTY; + + fec->rbd_index = 0; + fec->tbd_index = 0; + + return 0; + +err_ring: + for (; i >= 0; i--) + free((void *)fec->rbd_base[i].data_pointer); + free(fec->rbd_base); +err_rx: + free(fec->tbd_base); +err_tx: + return -ENOMEM; +} + +static void fec_free_descs(struct fec_priv *fec) +{ + int i; + + for (i = 0; i < FEC_RBD_NUM; i++) + free((void *)fec->rbd_base[i].data_pointer); + free(fec->rbd_base); + free(fec->tbd_base); +} + +#ifdef CONFIG_PHYLIB +int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr, + struct mii_dev *bus, struct phy_device *phydev) +#else +static int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr, + struct mii_dev *bus, int phy_id) +#endif { struct eth_device *edev; struct fec_priv *fec; - struct mii_dev *bus; unsigned char ethaddr[6]; uint32_t start; int ret = 0; @@ -805,6 +992,10 @@ static int fec_probe(bd_t *bd, int dev_id, int phy_id, uint32_t base_addr) memset(edev, 0, sizeof(*edev)); memset(fec, 0, sizeof(*fec)); + ret = fec_alloc_descs(fec); + if (ret) + goto err3; + edev->priv = fec; edev->init = fec_init; edev->send = fec_send; @@ -823,76 +1014,35 @@ static int fec_probe(bd_t *bd, int dev_id, int phy_id, uint32_t base_addr) while (readl(&fec->eth->ecntrl) & FEC_ECNTRL_RESET) { if (get_timer(start) > (CONFIG_SYS_HZ * 5)) { printf("FEC MXC: Timeout reseting chip\n"); - goto err3; + goto err4; } udelay(10); } - /* - * Set interrupt mask register - */ - writel(0x00000000, &fec->eth->imask); - - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - writel(0xffffffff, &fec->eth->ievent); - - /* - * Set FEC-Lite receive control register(R_CNTRL): - */ - /* - * Frame length=1518; MII mode; - */ - writel((PKTSIZE << FEC_RCNTRL_MAX_FL_SHIFT) | FEC_RCNTRL_FCE | - FEC_RCNTRL_MII_MODE, &fec->eth->r_cntrl); - fec_mii_setspeed(fec); - - if (dev_id == -1) { - sprintf(edev->name, "FEC"); - fec->dev_id = 0; - } else { - sprintf(edev->name, "FEC%i", dev_id); - fec->dev_id = dev_id; - } - fec->phy_id = phy_id; - - bus = mdio_alloc(); - if (!bus) { - printf("mdio_alloc failed\n"); - ret = -ENOMEM; - goto err3; - } - bus->read = fec_phy_read; - bus->write = fec_phy_write; - sprintf(bus->name, edev->name); -#ifdef CONFIG_MX28 - /* - * The i.MX28 has two ethernet interfaces, but they are not equal. - * Only the first one can access the MDIO bus. - */ - bus->priv = (struct ethernet_regs *)MXS_ENET0_BASE; + fec_reg_setup(fec); + fec_set_dev_name(edev->name, dev_id); + fec->dev_id = (dev_id == -1) ? 0 : dev_id; + fec->bus = bus; + fec_mii_setspeed(bus->priv); +#ifdef CONFIG_PHYLIB + fec->phydev = phydev; + phy_connect_dev(phydev, edev); + /* Configure phy */ + phy_config(phydev); #else - bus->priv = fec->eth; + fec->phy_id = phy_id; #endif - ret = mdio_register(bus); - if (ret) { - printf("mdio_register failed\n"); - free(bus); - ret = -ENOMEM; - goto err3; - } - fec->bus = bus; eth_register(edev); if (fec_get_hwaddr(edev, dev_id, ethaddr) == 0) { debug("got MAC%d address from fuse: %pM\n", dev_id, ethaddr); memcpy(edev->enetaddr, ethaddr, 6); + if (!getenv("ethaddr")) + eth_setenv_enetaddr("ethaddr", ethaddr); } - /* Configure phy */ - fec_eth_phy_config(edev); return ret; - +err4: + fec_free_descs(fec); err3: free(fec); err2: @@ -901,27 +1051,80 @@ err1: return ret; } -#ifndef CONFIG_FEC_MXC_MULTI -int fecmxc_initialize(bd_t *bd) +struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id) { - int lout = 1; + struct ethernet_regs *eth = (struct ethernet_regs *)base_addr; + struct mii_dev *bus; + int ret; - debug("eth_init: fec_probe(bd)\n"); - lout = fec_probe(bd, -1, CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE); + bus = mdio_alloc(); + if (!bus) { + printf("mdio_alloc failed\n"); + return NULL; + } + bus->read = fec_phy_read; + bus->write = fec_phy_write; + bus->priv = eth; + fec_set_dev_name(bus->name, dev_id); - return lout; + ret = mdio_register(bus); + if (ret) { + printf("mdio_register failed\n"); + free(bus); + return NULL; + } + fec_mii_setspeed(eth); + return bus; } -#endif int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr) { - int lout = 1; + uint32_t base_mii; + struct mii_dev *bus = NULL; +#ifdef CONFIG_PHYLIB + struct phy_device *phydev = NULL; +#endif + int ret; +#ifdef CONFIG_MX28 + /* + * The i.MX28 has two ethernet interfaces, but they are not equal. + * Only the first one can access the MDIO bus. + */ + base_mii = MXS_ENET0_BASE; +#else + base_mii = addr; +#endif debug("eth_init: fec_probe(bd, %i, %i) @ %08x\n", dev_id, phy_id, addr); - lout = fec_probe(bd, dev_id, phy_id, addr); + bus = fec_get_miibus(base_mii, dev_id); + if (!bus) + return -ENOMEM; +#ifdef CONFIG_PHYLIB + phydev = phy_find_by_mask(bus, 1 << phy_id, PHY_INTERFACE_MODE_RGMII); + if (!phydev) { + free(bus); + return -ENOMEM; + } + ret = fec_probe(bd, dev_id, addr, bus, phydev); +#else + ret = fec_probe(bd, dev_id, addr, bus, phy_id); +#endif + if (ret) { +#ifdef CONFIG_PHYLIB + free(phydev); +#endif + free(bus); + } + return ret; +} - return lout; +#ifdef CONFIG_FEC_MXC_PHYADDR +int fecmxc_initialize(bd_t *bd) +{ + return fecmxc_initialize_multi(bd, -1, CONFIG_FEC_MXC_PHYADDR, + IMX_FEC_BASE); } +#endif #ifndef CONFIG_PHYLIB int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int))