X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fnet%2Fmpc512x_fec.c;h=fb2c19a71b8466df7a877c6098e8f65865a56381;hb=0b23fb368d08c9669fac647971ff249c3f9fee8f;hp=7078c4ef77ce4e2818ac2dee72ee0d5ebe72b76e;hpb=7238ada313057a85409485b8ee21515dc10c07a5;p=u-boot diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c index 7078c4ef77..fb2c19a71b 100644 --- a/drivers/net/mpc512x_fec.c +++ b/drivers/net/mpc512x_fec.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2003-2007 + * (C) Copyright 2003-2009 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * Derived from the MPC8xx FEC driver. @@ -7,11 +7,11 @@ */ #include -#include #include #include #include #include +#include #include "mpc512x_fec.h" DECLARE_GLOBAL_DATA_PTR; @@ -26,11 +26,11 @@ DECLARE_GLOBAL_DATA_PTR; #endif #if (DEBUG & 0x40) -static uint32 local_crc32(char *string, unsigned int crc_value, int len); +static u32 local_crc32(char *string, unsigned int crc_value, int len); #endif -int fec512x_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal); -int fec512x_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data); +int fec512x_miiphy_read(char *devname, u8 phyAddr, u8 regAddr, u16 * retVal); +int fec512x_miiphy_write(char *devname, u8 phyAddr, u8 regAddr, u16 data); int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis); static uchar rx_buff[FEC_BUFFER_SIZE]; @@ -40,9 +40,9 @@ static int rx_buff_idx = 0; #if (DEBUG & 0x2) static void mpc512x_fec_phydump (char *devname) { - uint16 phyStatus, i; - uint8 phyAddr = CONFIG_PHY_ADDR; - uint8 reg_mask[] = { + u16 phyStatus, i; + u8 phyAddr = CONFIG_PHY_ADDR; + u8 reg_mask[] = { /* regs to print: 0...8, 21,27,31 */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, @@ -66,7 +66,8 @@ static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec) * Receive BDs init */ for (ix = 0; ix < FEC_RBD_NUM; ix++) { - fec->bdBase->rbd[ix].dataPointer = (uint32)&fec->bdBase->recv_frames[ix]; + fec->bdBase->rbd[ix].dataPointer = + (u32)&fec->bdBase->recv_frames[ix]; fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY; fec->bdBase->rbd[ix].dataLength = 0; } @@ -119,8 +120,9 @@ static void mpc512x_fec_rbd_clean (mpc512x_fec_priv *fec, volatile FEC_RBD * pRb /* * Now, we have an empty RxBD, notify FEC + * Set Descriptor polling active */ - fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */ + out_be32(&fec->eth->r_des_active, 0x01000000); } /********************************************************************/ @@ -164,10 +166,10 @@ static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec) /********************************************************************/ static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac) { - uint8 currByte; /* byte for which to compute the CRC */ + u8 currByte; /* byte for which to compute the CRC */ int byte; /* loop - counter */ int bit; /* loop - counter */ - uint32 crc = 0xffffffff; /* initial value */ + u32 crc = 0xffffffff; /* initial value */ /* * The algorithm used is the following: @@ -203,18 +205,20 @@ static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac) * Set individual hash table register */ if (crc >= 32) { - fec->eth->iaddr1 = (1 << (crc - 32)); - fec->eth->iaddr2 = 0; + out_be32(&fec->eth->iaddr1, (1 << (crc - 32))); + out_be32(&fec->eth->iaddr2, 0); } else { - fec->eth->iaddr1 = 0; - fec->eth->iaddr2 = (1 << crc); + out_be32(&fec->eth->iaddr1, 0); + out_be32(&fec->eth->iaddr2, (1 << crc)); } /* * Set physical address */ - fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]; - fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808; + out_be32(&fec->eth->paddr1, (mac[0] << 24) + (mac[1] << 16) + + (mac[2] << 8) + mac[3]); + out_be32(&fec->eth->paddr2, (mac[4] << 24) + (mac[5] << 16) + + 0x8808); } /********************************************************************/ @@ -227,45 +231,45 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) #endif /* Set interrupt mask register */ - fec->eth->imask = 0x00000000; + out_be32(&fec->eth->imask, 0x00000000); /* Clear FEC-Lite interrupt event register(IEVENT) */ - fec->eth->ievent = 0xffffffff; + out_be32(&fec->eth->ievent, 0xffffffff); /* Set transmit fifo watermark register(X_WMRK), default = 64 */ - fec->eth->x_wmrk = 0x0; + out_be32(&fec->eth->x_wmrk, 0x0); /* Set Opcode/Pause Duration Register */ - fec->eth->op_pause = 0x00010020; + out_be32(&fec->eth->op_pause, 0x00010020); /* Frame length=1522; MII mode */ - fec->eth->r_cntrl = (FEC_MAX_FRAME_LEN << 16) | 0x24; + out_be32(&fec->eth->r_cntrl, (FEC_MAX_FRAME_LEN << 16) | 0x24); /* Half-duplex, heartbeat disabled */ - fec->eth->x_cntrl = 0x00000000; + out_be32(&fec->eth->x_cntrl, 0x00000000); /* Enable MIB counters */ - fec->eth->mib_control = 0x0; + out_be32(&fec->eth->mib_control, 0x0); /* Setup recv fifo start and buff size */ - fec->eth->r_fstart = 0x500; - fec->eth->r_buff_size = FEC_BUFFER_SIZE; + out_be32(&fec->eth->r_fstart, 0x500); + out_be32(&fec->eth->r_buff_size, FEC_BUFFER_SIZE); /* Setup BD base addresses */ - fec->eth->r_des_start = (uint32)fec->bdBase->rbd; - fec->eth->x_des_start = (uint32)fec->bdBase->tbd; + out_be32(&fec->eth->r_des_start, (u32)fec->bdBase->rbd); + out_be32(&fec->eth->x_des_start, (u32)fec->bdBase->tbd); /* DMA Control */ - fec->eth->dma_control = 0xc0000000; + out_be32(&fec->eth->dma_control, 0xc0000000); /* Enable FEC */ - fec->eth->ecntrl |= 0x00000006; + setbits_be32(&fec->eth->ecntrl, 0x00000006); /* Initilize addresses and status words of BDs */ mpc512x_fec_bd_init (fec); /* Descriptor polling active */ - fec->eth->r_des_active = 0x01000000; + out_be32(&fec->eth->r_des_active, 0x01000000); #if (DEBUG & 0x1) printf("mpc512x_fec_init... Done \n"); @@ -277,9 +281,9 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis) { mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ + const u8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ int timeout = 1; - uint16 phyStatus; + u16 phyStatus; #if (DEBUG & 0x1) printf ("mpc512x_fec_init_phy... Begin\n"); @@ -288,19 +292,20 @@ int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis) /* * Clear FEC-Lite interrupt event register(IEVENT) */ - fec->eth->ievent = 0xffffffff; + out_be32(&fec->eth->ievent, 0xffffffff); /* * Set interrupt mask register */ - fec->eth->imask = 0x00000000; + out_be32(&fec->eth->imask, 0x00000000); if (fec->xcv_type != SEVENWIRE) { /* * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock * and do not drop the Preamble. */ - fec->eth->mii_speed = (((gd->ips_clk / 1000000) / 5) + 1) << 1; + out_be32(&fec->eth->mii_speed, + (((gd->ips_clk / 1000000) / 5) + 1) << 1); /* * Reset PHY, then delay 300ns @@ -414,27 +419,28 @@ static void mpc512x_fec_halt (struct eth_device *dev) /* * mask FEC chip interrupts */ - fec->eth->imask = 0; + out_be32(&fec->eth->imask, 0); /* * issue graceful stop command to the FEC transmitter if necessary */ - fec->eth->x_cntrl |= 0x00000001; + setbits_be32(&fec->eth->x_cntrl, 0x00000001); /* * wait for graceful stop to register */ - while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ; + while ((counter--) && (!(in_be32(&fec->eth->ievent) & 0x10000000))) + ; /* * Disable the Ethernet Controller */ - fec->eth->ecntrl &= 0xfffffffd; + clrbits_be32(&fec->eth->ecntrl, 0x00000002); /* * Issue a reset command to the FEC chip */ - fec->eth->ecntrl |= 0x1; + setbits_be32(&fec->eth->ecntrl, 0x1); /* * wait at least 16 clock cycles @@ -488,12 +494,12 @@ static int mpc512x_fec_send (struct eth_device *dev, volatile void *eth_data, */ pTbd = &fec->bdBase->tbd[fec->tbdIndex]; pTbd->dataLength = data_length; - pTbd->dataPointer = (uint32)eth_data; + pTbd->dataPointer = (u32)eth_data; pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; /* Activate transmit Buffer Descriptor polling */ - fec->eth->x_des_active = 0x01000000; /* Descriptor polling active */ + out_be32(&fec->eth->x_des_active, 0x01000000); #if (DEBUG & 0x8) printf ( "+" ); @@ -536,8 +542,8 @@ static int mpc512x_fec_recv (struct eth_device *dev) /* * Check if any critical events have happened */ - ievent = fec->eth->ievent; - fec->eth->ievent = ievent; + ievent = in_be32(&fec->eth->ievent); + out_be32(&fec->eth->ievent, ievent); if (ievent & 0x20060000) { /* BABT, Rx/Tx FIFO errors */ mpc512x_fec_halt (dev); @@ -546,13 +552,13 @@ static int mpc512x_fec_recv (struct eth_device *dev) } if (ievent & 0x80000000) { /* Heartbeat error */ - fec->eth->x_cntrl |= 0x00000001; + setbits_be32(&fec->eth->x_cntrl, 0x00000001); } if (ievent & 0x10000000) { /* Graceful stop complete */ - if (fec->eth->x_cntrl & 0x00000001) { + if (in_be32(&fec->eth->x_cntrl) & 0x00000001) { mpc512x_fec_halt (dev); - fec->eth->x_cntrl &= ~0x00000001; + clrbits_be32(&fec->eth->x_cntrl, 0x00000001);; mpc512x_fec_init (dev, NULL); } } @@ -574,7 +580,7 @@ static int mpc512x_fec_recv (struct eth_device *dev) printf ("recv data length 0x%08x data hdr: ", pRbd->dataLength); for (i = 0; i < 14; i++) - printf ("%x ", *((uint8*)pRbd->dataPointer + i)); + printf ("%x ", *((u8*)pRbd->dataPointer + i)); printf("\n"); } #endif @@ -598,13 +604,15 @@ static int mpc512x_fec_recv (struct eth_device *dev) } /* Try to fill Buffer Descriptors */ - fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */ + out_be32(&fec->eth->r_des_active, 0x01000000); + return frame_length; } /********************************************************************/ int mpc512x_fec_initialize (bd_t * bis) { + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; mpc512x_fec_priv *fec; struct eth_device *dev; int i; @@ -615,7 +623,7 @@ int mpc512x_fec_initialize (bd_t * bis) dev = (struct eth_device *) malloc (sizeof(*dev)); memset (dev, 0, sizeof *dev); - fec->eth = (ethernet_regs *) MPC512X_FEC; + fec->eth = &im->fec; # ifndef CONFIG_FEC_10MBIT fec->xcv_type = MII100; @@ -623,7 +631,7 @@ int mpc512x_fec_initialize (bd_t * bis) fec->xcv_type = MII10; # endif dev->priv = (void *)fec; - dev->iobase = MPC512X_FEC; + dev->iobase = (int)&im->fec; dev->init = mpc512x_fec_init; dev->halt = mpc512x_fec_halt; dev->send = mpc512x_fec_send; @@ -638,25 +646,26 @@ int mpc512x_fec_initialize (bd_t * bis) #endif /* Clean up space FEC's MIB and FIFO RAM ...*/ - memset ((void *) MPC512X_FEC + 0x200, 0x00, 0x400); + memset ((void *)&im->fec.mib, 0x00, sizeof(im->fec.mib)); + memset ((void *)&im->fec.fifo, 0x00, sizeof(im->fec.fifo)); /* * Malloc space for BDs (must be quad word-aligned) * this pointer is lost, so cannot be freed */ bd = malloc (sizeof(mpc512x_buff_descs) + 0x1f); - fec->bdBase = (mpc512x_buff_descs*)((uint32)bd & 0xfffffff0); + fec->bdBase = (mpc512x_buff_descs*)((u32)bd & 0xfffffff0); memset ((void *) bd, 0x00, sizeof(mpc512x_buff_descs) + 0x1f); /* * Set interrupt mask register */ - fec->eth->imask = 0x00000000; + out_be32(&fec->eth->imask, 0x00000000); /* * Clear FEC-Lite interrupt event register(IEVENT) */ - fec->eth->ievent = 0xffffffff; + out_be32(&fec->eth->ievent, 0xffffffff); /* * Try to set the mac address now. The fec mac address is @@ -671,8 +680,8 @@ int mpc512x_fec_initialize (bd_t * bis) tmp = (*end) ? end+1 : end; } mpc512x_fec_set_hwaddr (fec, env_enetaddr); - fec->eth->gaddr1 = 0x00000000; - fec->eth->gaddr2 = 0x00000000; + out_be32(&fec->eth->gaddr1, 0x00000000); + out_be32(&fec->eth->gaddr2, 0x00000000); } mpc512x_fec_init_phy (dev, bis); @@ -682,11 +691,12 @@ int mpc512x_fec_initialize (bd_t * bis) /* MII-interface related functions */ /********************************************************************/ -int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal) +int fec512x_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal) { - ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC; - uint32 reg; /* convenient holder for the PHY register */ - uint32 phy; /* convenient holder for the PHY */ + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile fec512x_t *eth = &im->fec; + u32 reg; /* convenient holder for the PHY register */ + u32 phy; /* convenient holder for the PHY */ int timeout = 0xffff; /* @@ -696,12 +706,16 @@ int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * r reg = regAddr << FEC_MII_DATA_RA_SHIFT; phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg); + out_be32(ð->mii_data, FEC_MII_DATA_ST | + FEC_MII_DATA_OP_RD | + FEC_MII_DATA_TA | + phy | reg); /* * wait for the related interrupt */ - while ((timeout--) && (!(eth->ievent & 0x00800000))) ; + while ((timeout--) && (!(in_be32(ð->ievent) & 0x00800000))) + ; if (timeout == 0) { #if (DEBUG & 0x2) @@ -713,34 +727,38 @@ int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * r /* * clear mii interrupt bit */ - eth->ievent = 0x00800000; + out_be32(ð->ievent, 0x00800000); /* * it's now safe to read the PHY's register */ - *retVal = (uint16) eth->mii_data; + *retVal = (u16) in_be32(ð->mii_data); return 0; } /********************************************************************/ -int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 data) +int fec512x_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data) { - ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC; - uint32 reg; /* convenient holder for the PHY register */ - uint32 phy; /* convenient holder for the PHY */ + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile fec512x_t *eth = &im->fec; + u32 reg; /* convenient holder for the PHY register */ + u32 phy; /* convenient holder for the PHY */ int timeout = 0xffff; reg = regAddr << FEC_MII_DATA_RA_SHIFT; phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | - FEC_MII_DATA_TA | phy | reg | data); + out_be32(ð->mii_data, FEC_MII_DATA_ST | + FEC_MII_DATA_OP_WR | + FEC_MII_DATA_TA | + phy | reg | data); /* * wait for the MII interrupt */ - while ((timeout--) && (!(eth->ievent & 0x00800000))) ; + while ((timeout--) && (!(in_be32(ð->ievent) & 0x00800000))) + ; if (timeout == 0) { #if (DEBUG & 0x2) @@ -752,13 +770,13 @@ int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 da /* * clear MII interrupt bit */ - eth->ievent = 0x00800000; + out_be32(ð->ievent, 0x00800000); return 0; } #if (DEBUG & 0x40) -static uint32 local_crc32 (char *string, unsigned int crc_value, int len) +static u32 local_crc32 (char *string, unsigned int crc_value, int len) { int i; char c;