X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fnet%2Fmpc5xxx_fec.c;h=1681e267243587af8e1516132ec30dea5903a507;hb=256670680b058105bb948c9f55e11db7ed949fa9;hp=1876b7684b8af86a85bf8828709c2ff49a7656e1;hpb=f5cf2ef2ad2a8bf321712ab460ed846120163d74;p=u-boot

diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c
index 1876b7684b..1681e26724 100644
--- a/drivers/net/mpc5xxx_fec.c
+++ b/drivers/net/mpc5xxx_fec.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2003-2005
+ * (C) Copyright 2003-2010
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * This file is based on mpc4200fec.c,
@@ -28,10 +28,6 @@ static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec);
 static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec);
 #endif /* DEBUG */
 
-#if (DEBUG & 0x40)
-static uint32 local_crc32(char *string, unsigned int crc_value, int len);
-#endif
-
 typedef struct {
     uint8 data[1500];           /* actual data */
     int length;                 /* actual length */
@@ -336,13 +332,11 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
 	 */
 	fec->eth->xmit_fsm = 0x03000000;
 
-#if defined(CONFIG_MPC5200)
 	/*
-	 * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't
+	 * Turn off COMM bus prefetch in the MPC5200 BestComm. It doesn't
 	 * work w/ the current receive task.
 	 */
 	 sdma->PtdCntrl |= 0x00000001;
-#endif
 
 	/*
 	 * Set priority of different initiators
@@ -579,9 +573,7 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
 /********************************************************************/
 static void mpc5xxx_fec_halt(struct eth_device *dev)
 {
-#if defined(CONFIG_MPC5200)
 	struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA;
-#endif
 	mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
 	int counter = 0xffff;
 
@@ -611,13 +603,11 @@ static void mpc5xxx_fec_halt(struct eth_device *dev)
 	SDMA_TASK_DISABLE (FEC_XMIT_TASK_NO);
 	SDMA_TASK_DISABLE (FEC_RECV_TASK_NO);
 
-#if defined(CONFIG_MPC5200)
 	/*
-	 * Turn on COMM bus prefetch in the MGT5200 BestComm after we're
+	 * Turn on COMM bus prefetch in the MPC5200 BestComm after we're
 	 * done. It doesn't work w/ the current receive task.
 	 */
 	 sdma->PtdCntrl &= ~0x00000001;
-#endif
 
 	/*
 	 * Disable the Ethernet Controller
@@ -1025,38 +1015,3 @@ int fec5xxx_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 dat
 
 	return 0;
 }
-
-#if (DEBUG & 0x40)
-static uint32 local_crc32(char *string, unsigned int crc_value, int len)
-{
-	int i;
-	char c;
-	unsigned int crc, count;
-
-	/*
-	 * crc32 algorithm
-	 */
-	/*
-	 * crc = 0xffffffff; * The initialized value should be 0xffffffff
-	 */
-	crc = crc_value;
-
-	for (i = len; --i >= 0;) {
-		c = *string++;
-		for (count = 0; count < 8; count++) {
-			if ((c & 0x01) ^ (crc & 0x01)) {
-				crc >>= 1;
-				crc = crc ^ 0xedb88320;
-			} else {
-				crc >>= 1;
-			}
-			c >>= 1;
-		}
-	}
-
-	/*
-	 * In big endian system, do byte swaping for crc value
-	 */
-	 /**/ return crc;
-}
-#endif	/* DEBUG */