X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fnet%2Fns9750_eth.c;h=9899563c47f31d9615e61623985d0ffa35b2b165;hb=1ad98ad66e5bb8a46a186a92f180bb9592d47673;hp=cade831ac90662d1c08e50f40ee27405ef803064;hpb=794a5924972fc8073616e98a2668da4a5f9aea90;p=u-boot

diff --git a/drivers/net/ns9750_eth.c b/drivers/net/ns9750_eth.c
index cade831ac9..9899563c47 100644
--- a/drivers/net/ns9750_eth.c
+++ b/drivers/net/ns9750_eth.c
@@ -90,8 +90,8 @@ static int nDebugLvl = DEBUG_ERROR_CRIT;
 # define ASSERT(expr, func)
 #endif /* DEBUG */
 
-#define NS9750_MII_NEG_DELAY		(5*CFG_HZ) /* in s */
-#define TX_TIMEOUT			(5*CFG_HZ) /* in s */
+#define NS9750_MII_NEG_DELAY		(5*CONFIG_SYS_HZ) /* in s */
+#define TX_TIMEOUT			(5*CONFIG_SYS_HZ) /* in s */
 
 /* @TODO move it to eeprom.h */
 #define FS_EEPROM_AUTONEG_MASK		0x7
@@ -399,8 +399,8 @@ static int ns9750_eth_reset (void)
 		ns9750_mii_get_clock_divisor (nPhyMaxMdioClock);
 
 	/* reset PHY */
-	ns9750_mii_write(PHY_BMCR, PHY_BMCR_RESET);
-	ns9750_mii_write(PHY_BMCR, 0);
+	ns9750_mii_write(MII_BMCR, BMCR_RESET);
+	ns9750_mii_write(MII_BMCR, 0);
 
 	/* @TODO check time */
 	udelay (3000);		/* [2] p.70 says at least 300us reset recovery time. But
@@ -455,26 +455,25 @@ static void ns9750_link_force (void)
 
 	DEBUG_FN (DEBUG_LINK);
 
-	uiControl = ns9750_mii_read(PHY_BMCR);
-	uiControl &= ~(PHY_BMCR_SPEED_MASK |
-		       PHY_BMCR_AUTON | PHY_BMCR_DPLX);
+	uiControl = ns9750_mii_read(MII_BMCR);
+	uiControl &= ~(BMCR_SPEED1000 | BMCR_SPEED100 |
+		       BMCR_ANENABLE | BMCR_FULLDPLX);
 
 	uiLastLinkStatus = 0;
 
 	if ((ucLinkMode & FS_EEPROM_AUTONEG_SPEED_MASK) ==
 	    FS_EEPROM_AUTONEG_SPEED_100) {
-		uiControl |= PHY_BMCR_100MB;
+		uiControl |= BMCR_SPEED100;
 		uiLastLinkStatus |= PHY_LXT971_STAT2_100BTX;
-	} else
-		uiControl |= PHY_BMCR_10_MBPS;
+	}
 
 	if ((ucLinkMode & FS_EEPROM_AUTONEG_DUPLEX_MASK) ==
 	    FS_EEPROM_AUTONEG_DUPLEX_FULL) {
-		uiControl |= PHY_BMCR_DPLX;
+		uiControl |= BMCR_FULLDPLX;
 		uiLastLinkStatus |= PHY_LXT971_STAT2_DUPLEX_MODE;
 	}
 
-	ns9750_mii_write(PHY_BMCR, uiControl);
+	ns9750_mii_write(MII_BMCR, uiControl);
 
 	ns9750_link_print_changed ();
 	ns9750_link_update_egcr ();
@@ -495,23 +494,23 @@ static void ns9750_link_auto_negotiate (void)
 
 	/* run auto-negotation */
 	/* define what we are capable of */
-	ns9750_mii_write(PHY_ANAR,
-			 PHY_ANLPAR_TXFD |
-			 PHY_ANLPAR_TX |
-			 PHY_ANLPAR_10FD |
-			 PHY_ANLPAR_10 |
+	ns9750_mii_write(MII_ADVERTISE,
+			 LPA_100FULL |
+			 LPA_100HALF |
+			 LPA_10FULL |
+			 LPA_10HALF |
 			 PHY_ANLPAR_PSB_802_3);
 	/* start auto-negotiation */
-	ns9750_mii_write(PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+	ns9750_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
 
 	/* wait for completion */
 
 	ulStartJiffies = get_ticks ();
 	while (get_ticks () < ulStartJiffies + NS9750_MII_NEG_DELAY) {
-		uiStatus = ns9750_mii_read(PHY_BMSR);
+		uiStatus = ns9750_mii_read(MII_BMSR);
 		if ((uiStatus &
-		     (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)) ==
-		    (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)) {
+		     (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) ==
+		    (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) {
 			/* lucky we are, auto-negotiation succeeded */
 			ns9750_link_print_changed ();
 			ns9750_link_update_egcr ();
@@ -569,13 +568,13 @@ static void ns9750_link_print_changed (void)
 
 	DEBUG_FN (DEBUG_LINK);
 
-	uiControl = ns9750_mii_read(PHY_BMCR);
+	uiControl = ns9750_mii_read(MII_BMCR);
 
-	if ((uiControl & PHY_BMCR_AUTON) == PHY_BMCR_AUTON) {
-		/* PHY_BMSR_LS is only set on autonegotiation */
-		uiStatus = ns9750_mii_read(PHY_BMSR);
+	if ((uiControl & BMCR_ANENABLE) == BMCR_ANENABLE) {
+		/* BMSR_LSTATUS is only set on autonegotiation */
+		uiStatus = ns9750_mii_read(MII_BMSR);
 
-		if (!(uiStatus & PHY_BMSR_LS)) {
+		if (!(uiStatus & BMSR_LSTATUS)) {
 			printk (KERN_WARNING NS9750_DRIVER_NAME
 				": link down\n");
 			/* @TODO Linux: carrier_off */
@@ -634,12 +633,12 @@ static char ns9750_mii_identify_phy (void)
 
 	DEBUG_FN (DEBUG_MII);
 
-	phyDetected = (PhyType) uiID1 = ns9750_mii_read(PHY_PHYIDR1);
+	phyDetected = (PhyType) uiID1 = ns9750_mii_read(MII_PHYSID1);
 
 	switch (phyDetected) {
 	case PHY_LXT971A:
 		szName = "LXT971A";
-		uiID2 = ns9750_mii_read(PHY_PHYIDR2);
+		uiID2 = ns9750_mii_read(MII_PHYSID2);
 		nPhyMaxMdioClock = PHY_LXT971_MDIO_MAX_CLK;
 		cRes = 1;
 		break;