X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fnet%2Ftsi108_eth.c;h=079354aaff361dd9f18301b3fc2a7d7e7466be98;hb=8339ad737316cda3d6246ea6be52e9f78bb63cc4;hp=524e9daa4cb4a79ec99a4ffaaf5bcfb7afbda8f4;hpb=2439e4bfa111babf4bc07ba20efbf3e36036813e;p=u-boot

diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 524e9daa4c..079354aaff 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -27,9 +27,6 @@
 
 #include <config.h>
 
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) \
-	&& defined(CONFIG_TSI108_ETH)
-
 #if !defined(CONFIG_TSI108_ETH_NUM_PORTS) || (CONFIG_TSI108_ETH_NUM_PORTS > 2)
 #error "CONFIG_TSI108_ETH_NUM_PORTS must be defined as 1 or 2"
 #endif
@@ -37,6 +34,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/cache.h>
 
 #ifdef DEBUG
@@ -56,7 +54,7 @@ printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args)
 #define RX_PRINT_ERRORS
 #define TX_PRINT_ERRORS
 
-#define ETH_BASE	(CFG_TSI108_CSR_BASE + 0x6000)
+#define ETH_BASE	(CONFIG_SYS_TSI108_CSR_BASE + 0x6000)
 
 #define ETH_PORT_OFFSET	0x400
 
@@ -792,7 +790,7 @@ static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis)
 	    (dev->enetaddr[0] << 16);
 
 	if (marvell_88e_phy_config(dev, &speed, &duplex) == 0)
-		return 0;
+		return -1;
 
 	value =
 	    MAC_CONFIG_2_PREAMBLE_LENGTH(7) | MAC_CONFIG_2_PAD_CRC |
@@ -864,7 +862,7 @@ static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis)
 	/* enable TX queue */
 	reg_TX_CONTROL(base) = TX_CONTROL_GO | 0x01;
 
-	return 1;
+	return 0;
 }
 
 /*
@@ -902,7 +900,7 @@ static int tsi108_eth_send (struct eth_device *dev,
 	status = le32_to_cpu(tx_descr->config_status);
 	if ((status & DMA_DESCR_TX_OK) == 0) {
 #ifdef TX_PRINT_ERRORS
-		printf ("TX packet error: 0x%08x\n    %s%s%s%s\n", status,
+		printf ("TX packet error: 0x%08lx\n    %s%s%s%s\n", status,
 		       status & DMA_DESCR_TX_OK ? "tx error, " : "",
 		       status & DMA_DESCR_TX_RETRY_LIMIT ?
 		       "retry limit reached, " : "",
@@ -962,7 +960,7 @@ static int tsi108_eth_recv (struct eth_device *dev)
 		status = le32_to_cpu(rx_descr->config_status);
 		if (status & DMA_DESCR_RX_BAD_FRAME) {
 #ifdef RX_PRINT_ERRORS
-			printf ("RX packet error: 0x%08x\n    %s%s%s%s%s%s\n",
+			printf ("RX packet error: 0x%08lx\n    %s%s%s%s%s%s\n",
 			       status,
 			       status & DMA_DESCR_RX_FRAME_IS_TYPE ? "too big, "
 			       : "",
@@ -1032,5 +1030,3 @@ static void tsi108_eth_halt (struct eth_device *dev)
 	/* Put MAC into reset state. */
 	reg_MAC_CONFIG_1(base) = MAC_CONFIG_1_SOFT_RESET;
 }
-
-#endif