X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fnet%2Ftsi108_eth.c;h=f100ec1a50e8d571236994d73865f399dfcc5722;hb=9082eeac5de1335d663016668c9b89c290f5c79b;hp=a09115e6ddd01156abd394ff3896f1113e1d5f58;hpb=422b1a01602b6e2fbf8444a1192c7ba31461fd4c;p=u-boot

diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index a09115e6dd..f100ec1a50 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -27,9 +27,6 @@
 
 #include <config.h>
 
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) \
-	&& defined(CONFIG_TSI108_ETH)
-
 #if !defined(CONFIG_TSI108_ETH_NUM_PORTS) || (CONFIG_TSI108_ETH_NUM_PORTS > 2)
 #error "CONFIG_TSI108_ETH_NUM_PORTS must be defined as 1 or 2"
 #endif
@@ -37,6 +34,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/cache.h>
 
 #ifdef DEBUG
@@ -56,7 +54,7 @@ printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args)
 #define RX_PRINT_ERRORS
 #define TX_PRINT_ERRORS
 
-#define ETH_BASE	(CFG_TSI108_CSR_BASE + 0x6000)
+#define ETH_BASE	(CONFIG_SYS_TSI108_CSR_BASE + 0x6000)
 
 #define ETH_PORT_OFFSET	0x400
 
@@ -733,7 +731,11 @@ int tsi108_eth_initialize (bd_t * bis)
 
 	for (index = 0; index < CONFIG_TSI108_ETH_NUM_PORTS; index++) {
 		dev = (struct eth_device *)malloc(sizeof(struct eth_device));
-
+		if (!dev) {
+			printf("tsi108: Can not allocate memory\n");
+			break;
+		}
+		memset(dev, 0, sizeof(*dev));
 		sprintf (dev->name, "TSI108_eth%d", index);
 
 		dev->iobase = ETH_BASE + (index * ETH_PORT_OFFSET);
@@ -902,7 +904,7 @@ static int tsi108_eth_send (struct eth_device *dev,
 	status = le32_to_cpu(tx_descr->config_status);
 	if ((status & DMA_DESCR_TX_OK) == 0) {
 #ifdef TX_PRINT_ERRORS
-		printf ("TX packet error: 0x%08x\n    %s%s%s%s\n", status,
+		printf ("TX packet error: 0x%08lx\n    %s%s%s%s\n", status,
 		       status & DMA_DESCR_TX_OK ? "tx error, " : "",
 		       status & DMA_DESCR_TX_RETRY_LIMIT ?
 		       "retry limit reached, " : "",
@@ -962,7 +964,7 @@ static int tsi108_eth_recv (struct eth_device *dev)
 		status = le32_to_cpu(rx_descr->config_status);
 		if (status & DMA_DESCR_RX_BAD_FRAME) {
 #ifdef RX_PRINT_ERRORS
-			printf ("RX packet error: 0x%08x\n    %s%s%s%s%s%s\n",
+			printf ("RX packet error: 0x%08lx\n    %s%s%s%s%s%s\n",
 			       status,
 			       status & DMA_DESCR_RX_FRAME_IS_TYPE ? "too big, "
 			       : "",
@@ -1032,5 +1034,3 @@ static void tsi108_eth_halt (struct eth_device *dev)
 	/* Put MAC into reset state. */
 	reg_MAC_CONFIG_1(base) = MAC_CONFIG_1_SOFT_RESET;
 }
-
-#endif