X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fnet%2Fuli526x.c;h=d05ae9ea0cfdefd2c4346ceea137919a9b935abe;hb=88a0b7694ffb69b1d1ff55d5f75a26722a86748a;hp=a4624e1734df9977fe210eb57e13dcf7a6698ad8;hpb=52eb2c79110151b9017a0829c4d44ee7b8e2ca04;p=u-boot

diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c
index a4624e1734..d05ae9ea0c 100644
--- a/drivers/net/uli526x.c
+++ b/drivers/net/uli526x.c
@@ -7,10 +7,7 @@
  * ULI 526x Ethernet port driver.
  * Based on the Linux driver: drivers/net/tulip/uli526x.c
  *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of  the GNU General  Public License as published by
- * the Free Software Foundation;  either version 2 of the  License, or
- * (at your option) any later version.
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
@@ -168,16 +165,14 @@ static char buf_pool[TX_BUF_ALLOC * TX_DESC_CNT + 4];
 static int mode = 8;
 
 /* function declaration -- */
-static int uli526x_start_xmit(struct eth_device *dev,
-				volatile void *packet, int length);
-static const struct ethtool_ops netdev_ethtool_ops;
+static int uli526x_start_xmit(struct eth_device *dev, void *packet, int length);
 static u16 read_srom_word(long, int);
 static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
 static void allocate_rx_buffer(struct uli526x_board_info *);
 static void update_cr6(u32, unsigned long);
-static u16 phy_read(unsigned long, u8, u8, u32);
+static u16 uli_phy_read(unsigned long, u8, u8, u32);
 static u16 phy_readby_cr10(unsigned long, u8, u8);
-static void phy_write(unsigned long, u8, u8, u16, u32);
+static void uli_phy_write(unsigned long, u8, u8, u16, u32);
 static void phy_writeby_cr10(unsigned long, u8, u8, u16);
 static void phy_write_1bit(unsigned long, u32, u32);
 static u16 phy_read_1bit(unsigned long, u32);
@@ -349,7 +344,7 @@ static void uli526x_disable(struct eth_device *dev)
 		/* Reset & stop ULI526X board */
 		outl(ULI526X_RESET, db->ioaddr + DCR0);
 		udelay(5);
-		phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+		uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
 
 		/* reset the board */
 		db->cr6_data &= ~(CR6_RXSC | CR6_TXSC);	/* Disable Tx/Rx */
@@ -385,7 +380,7 @@ static void uli526x_init(struct eth_device *dev)
 	db->tx_packet_cnt = 0;
 	for (phy_tmp = 0; phy_tmp < 32; phy_tmp++) {
 		/* peer add */
-		phy_value = phy_read(db->ioaddr, phy_tmp, 3, db->chip_id);
+		phy_value = uli_phy_read(db->ioaddr, phy_tmp, 3, db->chip_id);
 		if (phy_value != 0xffff && phy_value != 0) {
 			db->phy_addr = phy_tmp;
 			break;
@@ -404,10 +399,10 @@ static void uli526x_init(struct eth_device *dev)
 
 	if (!(inl(db->ioaddr + DCR12) & 0x8)) {
 		/* Phyxcer capability setting */
-		phy_reg_reset = phy_read(db->ioaddr,
+		phy_reg_reset = uli_phy_read(db->ioaddr,
 			db->phy_addr, 0, db->chip_id);
 		phy_reg_reset = (phy_reg_reset | 0x8000);
-		phy_write(db->ioaddr, db->phy_addr, 0,
+		uli_phy_write(db->ioaddr, db->phy_addr, 0,
 			phy_reg_reset, db->chip_id);
 		udelay(500);
 
@@ -443,8 +438,7 @@ static void uli526x_init(struct eth_device *dev)
  *	Send a packet to media from the upper layer.
  */
 
-static int uli526x_start_xmit(struct eth_device *dev,
-				volatile void *packet, int length)
+static int uli526x_start_xmit(struct eth_device *dev, void *packet, int length)
 {
 	struct uli526x_board_info *db = dev->priv;
 	struct tx_desc *txptr;
@@ -553,7 +547,7 @@ static int uli526x_rx_packet(struct eth_device *dev)
 
 	rdes0 = le32_to_cpu(rxptr->rdes0);
 #ifdef RX_DEBUG
-	printf("%s(): rxptr->rdes0=%x:%x\n", __FUNCTION__, rxptr->rdes0);
+	printf("%s(): rxptr->rdes0=%x\n", __FUNCTION__, rxptr->rdes0);
 #endif
 	if (!(rdes0 & 0x80000000)) {	/* packet owner check */
 		if ((rdes0 & 0x300) != 0x300) {
@@ -592,7 +586,8 @@ static int uli526x_rx_packet(struct eth_device *dev)
 					__FUNCTION__, i, rxptr->rx_buf_ptr[i]);
 #endif
 
-				NetReceive((uchar *)rxptr->rx_buf_ptr, rxlen);
+				net_process_received_packet(
+					(uchar *)rxptr->rx_buf_ptr, rxlen);
 				uli526x_reuse_buf(rxptr);
 
 			} else {
@@ -714,7 +709,7 @@ static void allocate_rx_buffer(struct uli526x_board_info *db)
 	u32 addr;
 
 	for (index = 0; index < RX_DESC_CNT; index++) {
-		addr = (u32)NetRxPackets[index];
+		addr = (u32)net_rx_packets[index];
 		addr += (16 - (addr & 15));
 		rxptr->rx_buf_ptr = (char *) addr;
 		rxptr->rdes2 = cpu_to_le32(addr);
@@ -781,7 +776,8 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db)
 	u16 phy_reg;
 
 	/* Phyxcer capability setting */
-	phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
+	phy_reg = uli_phy_read(db->ioaddr,
+			db->phy_addr, 4, db->chip_id) & ~0x01e0;
 
 	if (db->media_mode & ULI526X_AUTO) {
 		/* AUTO Mode */
@@ -802,10 +798,10 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db)
 		phy_reg |= db->PHY_reg4;
 		db->media_mode |= ULI526X_AUTO;
 	}
-	phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
+	uli_phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
 
 	/* Restart Auto-Negotiation */
-	phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
+	uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
 	udelay(50);
 }
 
@@ -813,7 +809,7 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db)
  *	Write a word to Phy register
  */
 
-static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
+static void uli_phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
 	u16 phy_data, u32 chip_id)
 {
 	u16 i;
@@ -862,7 +858,8 @@ static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
  *	Read a word data from phy register
  */
 
-static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
+static u16 uli_phy_read(unsigned long iobase, u8 phy_addr, u8 offset,
+			u32 chip_id)
 {
 	int i;
 	u16 phy_data;