X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fserial%2FKconfig;h=766e5ced03e72e2957c40fead2fa0a4d78e9ecb6;hb=6f9347f3bc839a5c65be0f5392ecc9ee305f88b3;hp=4be8868536d863690e5f036dff46b6e383f9fd00;hpb=abeb9d7897510533ce3a0a9515cac16db5bed834;p=u-boot

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 4be8868536..766e5ced03 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -197,6 +197,15 @@ config DEBUG_UART_AR933X
 	  driver will be available until the real driver model serial is
 	  running.
 
+config DEBUG_ARC_SERIAL
+	bool "ARC UART"
+	depends on ARC_SERIAL
+	help
+	  Select this to enable a debug UART using the ARC UART driver.
+	  You will need to provide parameters to make this work. The
+	  driver will be available until the real driver model serial is
+	  running.
+
 config DEBUG_UART_ATMEL
 	bool "Atmel USART"
 	help
@@ -315,6 +324,15 @@ config DEBUG_UART_MXC
 	  will need to provide parameters to make this work. The driver will
 	  be available until the real driver model serial is running.
 
+config DEBUG_UART_STM32
+	bool "STMicroelectronics STM32"
+	depends on STM32_SERIAL
+	help
+	  Select this to enable a debug UART using the serial_stm32 driver
+	  You will need to provide parameters to make this work.
+	  The driver will be available until the real driver model
+	  serial is running.
+
 config DEBUG_UART_UNIPHIER
 	bool "UniPhier on-chip UART"
 	depends on ARCH_UNIPHIER
@@ -425,6 +443,13 @@ config AR933X_UART
 	  tree binding to operate, please refer to the document at
 	  doc/device-tree-bindings/serial/qca,ar9330-uart.txt.
 
+config ARC_SERIAL
+	bool "ARC UART support"
+	depends on DM_SERIAL
+	help
+	  Select this to enable support for ARC UART now typically
+	  only used in Synopsys DesignWare ARC simulators like nSIM.
+
 config ATMEL_USART
 	bool "Atmel USART support"
 	help
@@ -600,6 +625,14 @@ config MSM_SERIAL
 	  for example APQ8016 and MSM8916.
 	  Single baudrate is supported in current implementation (115200).
 
+config OWL_SERIAL
+	bool "Actions Semi OWL UART"
+	depends on DM_SERIAL && ARCH_OWL
+	help
+	  If you have a Actions Semi OWL based board and want to use the on-chip
+	  serial port, say Y to this option. If unsure, say N.
+	  Single baudrate is supported in current implementation (115200).
+
 config PXA_SERIAL
 	bool "PXA serial port support"
 	help
@@ -624,7 +657,7 @@ config STM32_SERIAL
 
 config ZYNQ_SERIAL
 	bool "Cadence (Xilinx Zynq) UART support"
-	depends on DM_SERIAL && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+	depends on DM_SERIAL && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_ZYNQMP_R5)
 	help
 	  This driver supports the Cadence UART. It is found e.g. in Xilinx
 	  Zynq/ZynqMP.