X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fserial%2FKconfig;h=eba96f4a80d328b05cd2b6332b4550b176ca3061;hb=98e73c834467ef6f1d3e9a8102745e16b3128ac1;hp=5611fac0dc46793bfc23f08573eddb89a7ce2a91;hpb=563e53efaadd76def21612bcf9f0236d870b6e68;p=u-boot diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 5611fac0dc..eba96f4a80 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1,3 +1,20 @@ +# +# Serial device configuration +# + +menu "Serial drivers" + +config REQUIRE_SERIAL_CONSOLE + bool "Require a serial port for console" + # Running without a serial console is not supported by the + # non-dm serial code + depends on DM_SERIAL + default y + help + Require a serial port for the console, and panic if none is found + during serial port initialization (default y). Set this to n on + boards which have no debug serial port whatsoever. + config DM_SERIAL bool "Enable Driver Model for serial drivers" depends on DM @@ -37,6 +54,20 @@ choice prompt "Select which UART will provide the debug UART" depends on DEBUG_UART +config DEBUG_UART_ALTERA_JTAGUART + bool "Altera JTAG UART" + help + Select this to enable a debug UART using the altera_jtag_uart driver. + You will need to provide parameters to make this work. The driver will + be available until the real driver model serial is running. + +config DEBUG_UART_ALTERA_UART + bool "Altera UART" + help + Select this to enable a debug UART using the altera_uart driver. + You will need to provide parameters to make this work. The driver will + be available until the real driver model serial is running. + config DEBUG_UART_NS16550 bool "ns16550" help @@ -44,6 +75,37 @@ config DEBUG_UART_NS16550 will need to provide parameters to make this work. The driver will be available until the real driver model serial is running. +config DEBUG_EFI_CONSOLE + bool "EFI" + depends on EFI_APP + help + Select this to enable a debug console which calls back to EFI to + output to the console. This can be useful for early debugging of + U-Boot when running on top of EFI (Extensive Firmware Interface). + This is a type of BIOS used by PCs. + +config DEBUG_UART_S5P + bool "Samsung S5P" + help + Select this to enable a debug UART using the serial_s5p driver. You + will need to provide parameters to make this work. The driver will + be available until the real driver-model serial is running. + +config DEBUG_UART_ZYNQ + bool "Xilinx Zynq" + help + Select this to enable a debug UART using the serial_s5p driver. You + will need to provide parameters to make this work. The driver will + be available until the real driver-model serial is running. + +config DEBUG_UART_APBUART + depends on LEON3 + bool "Gaisler APBUART" + help + Select this to enable a debug UART using the serial_leon3 driver. You + will need to provide parameters to make this work. The driver will + be available until the real driver model serial is running. + endchoice config DEBUG_UART_BASE @@ -76,9 +138,97 @@ config DEBUG_UART_SHIFT value. Use this value to specify the shift to use, where 0=byte registers, 2=32-bit word registers, etc. +config DEBUG_UART_BOARD_INIT + bool "Enable board-specific debug UART init" + depends on DEBUG_UART + help + Some boards need to set things up before the debug UART can be used. + On these boards a call to debug_uart_init() is insufficient. When + this option is enabled, the function board_debug_uart_init() will + be called when debug_uart_init() is called. You can put any code + here that is needed to set up the UART ready for use, such as set + pin multiplexing or enable clocks. + +config DEBUG_UART_ANNOUNCE + bool "Show a message when the debug UART starts up" + depends on DEBUG_UART + help + Enable this option to show a message when the debug UART is ready + for use. You will see a message like " " as soon as + U-Boot has the UART ready for use (i.e. your code calls + debug_uart_init()). This can be useful just as a check that + everything is working. + +config ALTERA_JTAG_UART + bool "Altera JTAG UART support" + depends on DM_SERIAL + help + Select this to enable an JTAG UART for Altera devices.The JTAG UART + core implements a method to communicate serial character streams + between a host PC and a Qsys system on an Altera FPGA. Please find + details on the "Embedded Peripherals IP User Guide" of Altera. + +config ALTERA_JTAG_UART_BYPASS + bool "Bypass output when no connection" + depends on ALTERA_JTAG_UART + help + Bypass console output and keep going even if there is no JTAG + terminal connection with the host. The console output will resume + once the JTAG terminal is connected. Without the bypass, the console + output will wait forever until a JTAG terminal is connected. If you + not are sure, say Y. + +config ALTERA_UART + bool "Altera UART support" + depends on DM_SERIAL + help + Select this to enable an UART for Altera devices. Please find + details on the "Embedded Peripherals IP User Guide" of Altera. + +config ROCKCHIP_SERIAL + bool "Rockchip on-chip UART support" + depends on ARCH_ROCKCHIP && DM_SERIAL + help + Select this to enable a debug UART for Rockchip devices. This uses + the ns16550 driver. You will need to #define CONFIG_SYS_NS16550 in + your board config header. The clock input is automatically set to + use the oscillator (24MHz). + +config SANDBOX_SERIAL + bool "Sandbox UART support" + depends on SANDBOX + help + Select this to enable a seral UART for sandbox. This is required to + operate correctly, otherwise you will see no serial output from + sandbox. The emulated UART will display to the console and console + input will be fed into the UART. This allows you to interact with + U-Boot. + + The operation of the console is controlled by the -t command-line + flag. In raw mode, U-Boot sees all characters from the terminal + before they are processed, including Ctrl-C. In cooked mode, Ctrl-C + is processed by the terminal, and terminates U-Boot. Valid options + are: + + -t raw-with-sigs Raw mode, Ctrl-C will terminate U-Boot + -t raw Raw mode, Ctrl-C is processed by U-Boot + -t cooked Cooked mode, Ctrl-C terminates + config UNIPHIER_SERIAL bool "Support for UniPhier on-chip UART" - depends on ARCH_UNIPHIER && DM_SERIAL + depends on ARCH_UNIPHIER help If you have a UniPhier based board and want to use the on-chip serial ports, say Y to this option. If unsure, say N. + +config X86_SERIAL + bool "Support for 16550 serial port on x86 machines" + depends on X86 + default y + help + Most x86 machines have a ns16550 UART or compatible. This can be + enabled in the device tree with the correct input clock frequency + provided (default 1843200). Enable this to obtain serial console + output. + +endmenu