X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fserial%2Fns16550.c;h=8e7052dda72046308a55783c84e52c342876c78c;hb=64973023df4f31e72ecc56005f123da5841f7066;hp=23c0f76ddea928c205f62f58e09a315468ca8a43;hpb=a77034a8dfc7942ca08483138dccdebeacc36826;p=u-boot diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 23c0f76dde..8e7052dda7 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -7,6 +7,8 @@ #include #include #include +#include +#include #define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */ #define UART_MCRVAL (UART_MCR_DTR | \ @@ -14,71 +16,132 @@ #define UART_FCRVAL (UART_FCR_FIFO_EN | \ UART_FCR_RXSR | \ UART_FCR_TXSR) /* Clear & enable FIFOs */ +#ifdef CONFIG_SYS_NS16550_PORT_MAPPED +#define serial_out(x, y) outb(x, (ulong)y) +#define serial_in(y) inb((ulong)y) +#elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE > 0) +#define serial_out(x, y) out_be32(y, x) +#define serial_in(y) in_be32(y) +#elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE < 0) +#define serial_out(x, y) out_le32(y, x) +#define serial_in(y) in_le32(y) +#else +#define serial_out(x, y) writeb(x, y) +#define serial_in(y) readb(y) +#endif + +#if defined(CONFIG_SOC_KEYSTONE) +#define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0 +#define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0)) +#undef UART_MCRVAL +#ifdef CONFIG_SERIAL_HW_FLOW_CONTROL +#define UART_MCRVAL (UART_MCR_RTS | UART_MCR_AFE) +#else +#define UART_MCRVAL (UART_MCR_RTS) +#endif +#endif -void NS16550_init (NS16550_t com_port, int baud_divisor) +#ifndef CONFIG_SYS_NS16550_IER +#define CONFIG_SYS_NS16550_IER 0x00 +#endif /* CONFIG_SYS_NS16550_IER */ + +void NS16550_init(NS16550_t com_port, int baud_divisor) { - com_port->ier = 0x00; -#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2) - com_port->mdr1 = 0x7; /* mode select reset TL16C750*/ +#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX)) + /* + * On some OMAP3 devices when UART3 is configured for boot mode before + * SPL starts only THRE bit is set. We have to empty the transmitter + * before initialization starts. + */ + if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE)) + == UART_LSR_THRE) { + serial_out(UART_LCR_DLAB, &com_port->lcr); + serial_out(baud_divisor & 0xff, &com_port->dll); + serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); + serial_out(UART_LCRVAL, &com_port->lcr); + serial_out(0, &com_port->mdr1); + } #endif - com_port->lcr = UART_LCR_BKSE | UART_LCRVAL; - com_port->dll = 0; - com_port->dlm = 0; - com_port->lcr = UART_LCRVAL; - com_port->mcr = UART_MCRVAL; - com_port->fcr = UART_FCRVAL; - com_port->lcr = UART_LCR_BKSE | UART_LCRVAL; - com_port->dll = baud_divisor & 0xff; - com_port->dlm = (baud_divisor >> 8) & 0xff; - com_port->lcr = UART_LCRVAL; -#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2) -#if defined(CONFIG_APTIX) - com_port->mdr1 = 3; /* /13 mode so Aptix 6MHz can hit 115200 */ -#else - com_port->mdr1 = 0; /* /16 is proper to hit 115200 with 48MHz */ + + while (!(serial_in(&com_port->lsr) & UART_LSR_TEMT)) + ; + + serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); +#if defined(CONFIG_OMAP) || defined(CONFIG_AM33XX) || \ + defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX) + serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ #endif + serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); + serial_out(0, &com_port->dll); + serial_out(0, &com_port->dlm); + serial_out(UART_LCRVAL, &com_port->lcr); + serial_out(UART_MCRVAL, &com_port->mcr); + serial_out(UART_FCRVAL, &com_port->fcr); + serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); + serial_out(baud_divisor & 0xff, &com_port->dll); + serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); + serial_out(UART_LCRVAL, &com_port->lcr); +#if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \ + defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \ + defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX) + + /* /16 is proper to hit 115200 with 48MHz */ + serial_out(0, &com_port->mdr1); #endif /* CONFIG_OMAP */ +#if defined(CONFIG_SOC_KEYSTONE) + serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC); +#endif } #ifndef CONFIG_NS16550_MIN_FUNCTIONS -void NS16550_reinit (NS16550_t com_port, int baud_divisor) +void NS16550_reinit(NS16550_t com_port, int baud_divisor) { - com_port->ier = 0x00; - com_port->lcr = UART_LCR_BKSE | UART_LCRVAL; - com_port->dll = 0; - com_port->dlm = 0; - com_port->lcr = UART_LCRVAL; - com_port->mcr = UART_MCRVAL; - com_port->fcr = UART_FCRVAL; - com_port->lcr = UART_LCR_BKSE; - com_port->dll = baud_divisor & 0xff; - com_port->dlm = (baud_divisor >> 8) & 0xff; - com_port->lcr = UART_LCRVAL; + serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); + serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); + serial_out(0, &com_port->dll); + serial_out(0, &com_port->dlm); + serial_out(UART_LCRVAL, &com_port->lcr); + serial_out(UART_MCRVAL, &com_port->mcr); + serial_out(UART_FCRVAL, &com_port->fcr); + serial_out(UART_LCR_BKSE, &com_port->lcr); + serial_out(baud_divisor & 0xff, &com_port->dll); + serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); + serial_out(UART_LCRVAL, &com_port->lcr); } #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ -void NS16550_putc (NS16550_t com_port, char c) +void NS16550_putc(NS16550_t com_port, char c) { - while ((com_port->lsr & UART_LSR_THRE) == 0); - com_port->thr = c; + while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0) + ; + serial_out(c, &com_port->thr); + + /* + * Call watchdog_reset() upon newline. This is done here in putc + * since the environment code uses a single puts() to print the complete + * environment upon "printenv". So we can't put this watchdog call + * in puts(). + */ + if (c == '\n') + WATCHDOG_RESET(); } #ifndef CONFIG_NS16550_MIN_FUNCTIONS -char NS16550_getc (NS16550_t com_port) +char NS16550_getc(NS16550_t com_port) { - while ((com_port->lsr & UART_LSR_DR) == 0) { -#ifdef CONFIG_USB_TTY + while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) { +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_TTY) extern void usbtty_poll(void); usbtty_poll(); #endif WATCHDOG_RESET(); } - return (com_port->rbr); + return serial_in(&com_port->rbr); } -int NS16550_tstc (NS16550_t com_port) +int NS16550_tstc(NS16550_t com_port) { - return ((com_port->lsr & UART_LSR_DR) != 0); + return (serial_in(&com_port->lsr) & UART_LSR_DR) != 0; } #endif /* CONFIG_NS16550_MIN_FUNCTIONS */