X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fserial%2Fns16550.c;h=c6cb3eb500cae251509f3979a688469dedd4d3c4;hb=c41c649c2fdec7bf6ef84173597cc3feabdb7828;hp=9b044a37da500f3deabfde65d1b9684e2f03957c;hpb=9091400859248e2f1d04f34f37c8a30b15fc4ef7;p=u-boot diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 9b044a37da..c6cb3eb500 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -55,8 +54,6 @@ DECLARE_GLOBAL_DATA_PTR; #define CONFIG_SYS_NS16550_IER 0x00 #endif /* CONFIG_SYS_NS16550_IER */ -#ifdef CONFIG_DM_SERIAL - static inline void serial_out_shift(void *addr, int shift, int value) { #ifdef CONFIG_SYS_NS16550_PORT_MAPPED @@ -91,18 +88,25 @@ static inline int serial_in_shift(void *addr, int shift) #endif } +#ifdef CONFIG_DM_SERIAL + +#ifndef CONFIG_SYS_NS16550_CLK +#define CONFIG_SYS_NS16550_CLK 0 +#endif + static void ns16550_writeb(NS16550_t port, int offset, int value) { struct ns16550_platdata *plat = port->plat; unsigned char *addr; offset *= 1 << plat->reg_shift; - addr = map_sysmem(plat->base, 0) + offset; + addr = (unsigned char *)plat->base + offset; + /* * As far as we know it doesn't make sense to support selection of * these options at run-time, so use the existing CONFIG options. */ - serial_out_shift(addr, plat->reg_shift, value); + serial_out_shift(addr + plat->reg_offset, plat->reg_shift, value); } static int ns16550_readb(NS16550_t port, int offset) @@ -111,9 +115,9 @@ static int ns16550_readb(NS16550_t port, int offset) unsigned char *addr; offset *= 1 << plat->reg_shift; - addr = map_sysmem(plat->base, 0) + offset; + addr = (unsigned char *)plat->base + offset; - return serial_in_shift(addr, plat->reg_shift); + return serial_in_shift(addr + plat->reg_offset, plat->reg_shift); } /* We can clean these up once everything is moved to driver model */ @@ -125,27 +129,13 @@ static int ns16550_readb(NS16550_t port, int offset) (unsigned char *)addr - (unsigned char *)com_port) #endif -static inline int calc_divisor(NS16550_t port, int clock, int baudrate) +int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate) { const unsigned int mode_x_div = 16; return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate); } -int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate) -{ -#ifdef CONFIG_OMAP1510 - /* If can't cleanly clock 115200 set div to 1 */ - if ((clock == 12000000) && (baudrate == 115200)) { - port->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */ - return 1; /* return 1 for base divisor */ - } - port->osc_12m_sel = 0; /* clear if previsouly set */ -#endif - - return calc_divisor(port, clock, baudrate); -} - static void NS16550_setbrg(NS16550_t com_port, int baud_divisor) { serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); @@ -246,7 +236,18 @@ int NS16550_tstc(NS16550_t com_port) #include -void debug_uart_init(void) +#define serial_dout(reg, value) \ + serial_out_shift((char *)com_port + \ + ((char *)reg - (char *)com_port) * \ + (1 << CONFIG_DEBUG_UART_SHIFT), \ + CONFIG_DEBUG_UART_SHIFT, value) +#define serial_din(reg) \ + serial_in_shift((char *)com_port + \ + ((char *)reg - (char *)com_port) * \ + (1 << CONFIG_DEBUG_UART_SHIFT), \ + CONFIG_DEBUG_UART_SHIFT) + +static inline void _debug_uart_init(void) { struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; int baud_divisor; @@ -257,30 +258,25 @@ void debug_uart_init(void) * feasible. The better fix is to move all users of this driver to * driver model. */ - baud_divisor = calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK, - CONFIG_BAUDRATE); - serial_out_shift(&com_port->ier, CONFIG_DEBUG_UART_SHIFT, - CONFIG_SYS_NS16550_IER); - serial_out_shift(&com_port->mcr, CONFIG_DEBUG_UART_SHIFT, UART_MCRVAL); - serial_out_shift(&com_port->fcr, CONFIG_DEBUG_UART_SHIFT, UART_FCRVAL); - - serial_out_shift(&com_port->lcr, CONFIG_DEBUG_UART_SHIFT, - UART_LCR_BKSE | UART_LCRVAL); - serial_out_shift(&com_port->dll, CONFIG_DEBUG_UART_SHIFT, - baud_divisor & 0xff); - serial_out_shift(&com_port->dlm, CONFIG_DEBUG_UART_SHIFT, - (baud_divisor >> 8) & 0xff); - serial_out_shift(&com_port->lcr, CONFIG_DEBUG_UART_SHIFT, - UART_LCRVAL); + baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK, + CONFIG_BAUDRATE); + serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER); + serial_dout(&com_port->mcr, UART_MCRVAL); + serial_dout(&com_port->fcr, UART_FCRVAL); + + serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL); + serial_dout(&com_port->dll, baud_divisor & 0xff); + serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff); + serial_dout(&com_port->lcr, UART_LCRVAL); } static inline void _debug_uart_putc(int ch) { struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; - while (!(serial_in_shift(&com_port->lsr, 0) & UART_LSR_THRE)) + while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) ; - serial_out_shift(&com_port->thr, CONFIG_DEBUG_UART_SHIFT, ch); + serial_dout(&com_port->thr, ch); } DEBUG_UART_FUNCS @@ -351,15 +347,15 @@ int ns16550_serial_probe(struct udevice *dev) return 0; } -#ifdef CONFIG_OF_CONTROL +#if CONFIG_IS_ENABLED(OF_CONTROL) int ns16550_serial_ofdata_to_platdata(struct udevice *dev) { struct ns16550_platdata *plat = dev->platdata; fdt_addr_t addr; /* try Processor Local Bus device first */ - addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); -#ifdef CONFIG_PCI + addr = dev_get_addr(dev); +#if defined(CONFIG_PCI) && defined(CONFIG_DM_PCI) if (addr == FDT_ADDR_T_NONE) { /* then try pci device */ struct fdt_pci_addr pci_addr; @@ -380,8 +376,7 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev) return ret; } - ret = fdtdec_get_pci_bar32(gd->fdt_blob, dev->of_offset, - &pci_addr, &bar); + ret = fdtdec_get_pci_bar32(dev, &pci_addr, &bar); if (ret) return ret; @@ -392,9 +387,23 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev) if (addr == FDT_ADDR_T_NONE) return -EINVAL; +#ifdef CONFIG_SYS_NS16550_PORT_MAPPED plat->base = addr; +#else + plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE); +#endif + + plat->reg_offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "reg-offset", 0); plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset, - "reg-shift", 1); + "reg-shift", 0); + plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "clock-frequency", + CONFIG_SYS_NS16550_CLK); + if (!plat->clock) { + debug("ns16550 clock not defined\n"); + return -EINVAL; + } return 0; } @@ -406,4 +415,41 @@ const struct dm_serial_ops ns16550_serial_ops = { .getc = ns16550_serial_getc, .setbrg = ns16550_serial_setbrg, }; + +#if CONFIG_IS_ENABLED(OF_CONTROL) +/* + * Please consider existing compatible strings before adding a new + * one to keep this table compact. Or you may add a generic "ns16550" + * compatible string to your dts. + */ +static const struct udevice_id ns16550_serial_ids[] = { + { .compatible = "ns16550" }, + { .compatible = "ns16550a" }, + { .compatible = "nvidia,tegra20-uart" }, + { .compatible = "snps,dw-apb-uart" }, + { .compatible = "ti,omap2-uart" }, + { .compatible = "ti,omap3-uart" }, + { .compatible = "ti,omap4-uart" }, + { .compatible = "ti,am3352-uart" }, + { .compatible = "ti,am4372-uart" }, + { .compatible = "ti,dra742-uart" }, + {} +}; +#endif + +#if CONFIG_IS_ENABLED(SERIAL_PRESENT) +U_BOOT_DRIVER(ns16550_serial) = { + .name = "ns16550_serial", + .id = UCLASS_SERIAL, +#if CONFIG_IS_ENABLED(OF_CONTROL) + .of_match = ns16550_serial_ids, + .ofdata_to_platdata = ns16550_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), +#endif + .priv_auto_alloc_size = sizeof(struct NS16550), + .probe = ns16550_serial_probe, + .ops = &ns16550_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; +#endif #endif /* CONFIG_DM_SERIAL */