X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fserial%2Fserial_mxc.c;h=af00b9c0ec426856eaf716466d087f9cf270cc72;hb=6b9408edd3f6af6e91bcc0eebd4aedc0aca28934;hp=4b93e7b97fece8009d4a23ac826a606ac2d10569;hpb=995a4b1d83a08223c82c1e15778b02e85e5bba51;p=u-boot

diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index 4b93e7b97f..af00b9c0ec 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -18,47 +18,18 @@
  */
 
 #include <common.h>
-#ifdef CONFIG_MX31
-#include <asm/arch/mx31.h>
-#else
+#include <watchdog.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
-#endif
 
 #define __REG(x)     (*((volatile u32 *)(x)))
 
-#if defined(CONFIG_SYS_MX31_UART1) || defined(CONFIG_SYS_MX25_UART1)
-#define UART_PHYS 0x43f90000
-#elif defined(CONFIG_SYS_MX31_UART2) || defined(CONFIG_SYS_MX25_UART2)
-#define UART_PHYS 0x43f94000
-#elif defined(CONFIG_SYS_MX31_UART3) || defined(CONFIG_SYS_MX25_UART3)
-#define UART_PHYS 0x5000c000
-#elif defined(CONFIG_SYS_MX31_UART4) || defined(CONFIG_SYS_MX25_UART4)
-#define UART_PHYS 0x43fb0000
-#elif defined(CONFIG_SYS_MX31_UART5) || defined(CONFIG_SYS_MX25_UART5)
-#define UART_PHYS 0x43fb4000
-#elif defined(CONFIG_SYS_MX27_UART1)
-#define UART_PHYS 0x1000a000
-#elif defined(CONFIG_SYS_MX27_UART2)
-#define UART_PHYS 0x1000b000
-#elif defined(CONFIG_SYS_MX27_UART3)
-#define UART_PHYS 0x1000c000
-#elif defined(CONFIG_SYS_MX27_UART4)
-#define UART_PHYS 0x1000d000
-#elif defined(CONFIG_SYS_MX27_UART5)
-#define UART_PHYS 0x1001b000
-#elif defined(CONFIG_SYS_MX27_UART6)
-#define UART_PHYS 0x1001c000
-#elif defined(CONFIG_SYS_MX51_UART1)
-#define UART_PHYS UART1_BASE_ADDR
-#elif defined(CONFIG_SYS_MX51_UART2)
-#define UART_PHYS UART2_BASE_ADDR
-#elif defined(CONFIG_SYS_MX51_UART3)
-#define UART_PHYS UART3_BASE_ADDR
-#else
-#error "define CONFIG_SYS_MXxx_UARTx to use the MXC UART driver"
+#ifndef CONFIG_MXC_UART_BASE
+#error "define CONFIG_MXC_UART_BASE to use the MXC UART driver"
 #endif
 
+#define UART_PHYS	CONFIG_MXC_UART_BASE
+
 #ifdef CONFIG_SERIAL_MULTI
 #warning "MXC driver does not support MULTI serials."
 #endif
@@ -189,7 +160,8 @@ void serial_setbrg (void)
 
 int serial_getc (void)
 {
-	while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
+	while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY)
+		WATCHDOG_RESET();
 	return (__REG(UART_PHYS + URXD) & URXD_RX_DATA); /* mask out status from upper word */
 }
 
@@ -198,7 +170,8 @@ void serial_putc (const char c)
 	__REG(UART_PHYS + UTXD) = c;
 
 	/* wait for transmitter to be ready */
-	while(!(__REG(UART_PHYS + UTS) & UTS_TXEMPTY));
+	while (!(__REG(UART_PHYS + UTS) & UTS_TXEMPTY))
+		WATCHDOG_RESET();
 
 	/* If \n, also do \r */
 	if (c == '\n')