X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fspi%2Fxilinx_spi.c;h=56d99d17c7d95f6b3474a3a56595e2be67398aa6;hb=a5a58826110eb3da2956c6b3213bd750e166d75c;hp=52a4134f18b956963d8aa65c6a814f57bb9b585e;hpb=495dbd72dd1172de866ba323263a5b62cf454972;p=u-boot

diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 52a4134f18..56d99d17c7 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -9,7 +9,7 @@
  * Copyright (c) 2010 Graeme Smecher <graeme.smecher@mail.mcgill.ca>
  * Copyright (c) 2012 Stephan Linz <linz@li-pro.net>
  *
- * Licensed under the GPL-2 or later.
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * [0]: http://www.xilinx.com/support/documentation
  *
@@ -85,20 +85,20 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 		return NULL;
 	}
 
-	xilspi = malloc(sizeof(*xilspi));
+	xilspi = spi_alloc_slave(struct xilinx_spi_slave, bus, cs);
 	if (!xilspi) {
 		printf("XILSPI error: %s: malloc of SPI structure failed\n",
 				__func__);
 		return NULL;
 	}
-	xilspi->slave.bus = bus;
-	xilspi->slave.cs = cs;
 	xilspi->regs = (struct xilinx_spi_reg *)xilinx_spi_base_list[bus];
 	xilspi->freq = max_hz;
 	xilspi->mode = mode;
 	debug("%s: bus:%i cs:%i base:%p mode:%x max_hz:%d\n", __func__,
 		bus, cs, xilspi->regs, xilspi->mode, xilspi->freq);
 
+	writel(SPISSR_RESET_VALUE, &xilspi->regs->srr);
+
 	return &xilspi->slave;
 }
 
@@ -149,6 +149,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 	const unsigned char *txp = dout;
 	unsigned char *rxp = din;
 	unsigned rxecount = 17;	/* max. 16 elements in FIFO, leftover 1 */
+	unsigned global_timeout;
 
 	debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__,
 		slave->bus, slave->cs, bitlen, bytes, flags);
@@ -176,11 +177,12 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 	if (flags & SPI_XFER_BEGIN)
 		spi_cs_activate(slave);
 
-	while (bytes--) {
-		unsigned timeout = /* at least 1usec or greater, leftover 1 */
-			xilspi->freq > XILSPI_MAX_XFER_BITS * 1000000 ? 2 :
+	/* at least 1usec or greater, leftover 1 */
+	global_timeout = xilspi->freq > XILSPI_MAX_XFER_BITS * 1000000 ? 2 :
 			(XILSPI_MAX_XFER_BITS * 1000000 / xilspi->freq) + 1;
 
+	while (bytes--) {
+		unsigned timeout = global_timeout;
 		/* get Tx element from data out buffer and count up */
 		unsigned char d = txp ? *txp++ : CONFIG_XILINX_SPI_IDLE_VAL;
 		debug("%s: tx:%x ", __func__, d);