X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fusb%2Fhost%2FKconfig;h=b9c5fbe381fb3e460f8085e5f059cd2bd96e0571;hb=4ddc981225288e68d45eb8e33271d1481920086f;hp=89580cc31f786b936096c0cc94cff0009b9f0623;hpb=2313d48445e59f063ec9a3b4940fe8252737db76;p=u-boot

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 89580cc31f..b9c5fbe381 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -3,39 +3,45 @@
 #
 comment "USB Host Controller Drivers"
 
+config USB_HOST
+	bool
+
 config USB_XHCI_HCD
 	bool "xHCI HCD (USB 3.0) support"
+	select USB_HOST
 	---help---
 	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
 	  "SuperSpeed" host controller hardware.
 
 if USB_XHCI_HCD
 
-config USB_XHCI_UNIPHIER
-	bool "Support for UniPhier on-chip xHCI USB controller"
-	depends on ARCH_UNIPHIER
-	default y
-	---help---
-	  Enables support for the on-chip xHCI controller on UniPhier SoCs.
-
 config USB_XHCI_DWC3
 	bool "DesignWare USB3 DRD Core Support"
 	help
 	  Say Y or if your system has a Dual Role SuperSpeed
 	  USB controller based on the DesignWare USB3 IP Core.
 
-endif
+config USB_XHCI_MVEBU
+	bool "MVEBU USB 3.0 support"
+	default y
+	depends on ARCH_MVEBU
+	help
+	  Choose this option to add support for USB 3.0 driver on mvebu
+	  SoCs, which includes Armada8K, Armada3700 and other Armada
+	  family SoCs.
 
-config USB_OHCI_GENERIC
-	bool "Support for generic OHCI USB controller"
-	depends on OF_CONTROL
-	depends on DM_USB
-	default n
-	---help---
-	  Enables support for generic OHCI controller.
+config USB_XHCI_ROCKCHIP
+	bool "Support for Rockchip on-chip xHCI USB controller"
+	depends on ARCH_ROCKCHIP
+	default y
+	help
+	  Enables support for the on-chip xHCI controller on Rockchip SoCs.
+
+endif # USB_XHCI_HCD
 
 config USB_EHCI_HCD
 	bool "EHCI HCD (USB 2.0) support"
+	select USB_HOST
 	---help---
 	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
 	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
@@ -60,6 +66,13 @@ config USB_EHCI
 
 if USB_EHCI_HCD
 
+config USB_EHCI_ATMEL
+	bool  "Support for Atmel on-chip EHCI USB controller"
+	depends on ARCH_AT91
+	default y
+	---help---
+	  Enables support for the on-chip EHCI controller on Atmel chips.
+
 config USB_EHCI_MARVELL
 	bool "Support for MVEBU (AXP / A38x) on-chip EHCI USB controller"
 	depends on ARCH_MVEBU
@@ -74,6 +87,22 @@ config USB_EHCI_MX6
 	---help---
 	  Enables support for the on-chip EHCI controller on i.MX6 SoCs.
 
+config USB_EHCI_MX7
+	bool "Support for i.MX7 on-chip EHCI USB controller"
+	depends on ARCH_MX7
+	default y
+	---help---
+	  Enables support for the on-chip EHCI controller on i.MX7 SoCs.
+
+if USB_EHCI_MX7
+
+config MXC_USB_OTG_HACTIVE
+	bool "USB Power pin high active"
+	---help---
+	  Set the USB Power pin polarity to be high active (PWR_POL)
+
+endif
+
 config USB_EHCI_MSM
 	bool "Support for Qualcomm on-chip EHCI USB controller"
 	depends on DM_USB
@@ -85,6 +114,13 @@ config USB_EHCI_MSM
 	  This driver supports combination of Chipidea USB controller
 	  and Synapsys USB PHY in host mode only.
 
+config USB_EHCI_ZYNQ
+	bool "Support for Xilinx Zynq on-chip EHCI USB controller"
+	depends on ARCH_ZYNQ
+	default y
+	---help---
+	  Enable support for Zynq on-chip EHCI USB controller
+
 config USB_EHCI_GENERIC
 	bool "Support for generic EHCI USB controller"
 	depends on OF_CONTROL
@@ -93,4 +129,46 @@ config USB_EHCI_GENERIC
 	---help---
 	  Enables support for generic EHCI controller.
 
-endif
+endif # USB_EHCI_HCD
+
+config USB_OHCI_HCD
+	bool "OHCI HCD (USB 1.1) support"
+	---help---
+	  The Open Host Controller Interface (OHCI) is a standard for accessing
+	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
+	  UHCI specification.  If your USB host controller follows the OHCI spec,
+	  say Y.  On most non-x86 systems, and on x86 hardware that's not using a
+	  USB controller from Intel or VIA, this is appropriate.  If your host
+	  controller doesn't use PCI, this is probably appropriate.  For a PCI
+	  based system where you're not sure, the "lspci -v" entry will list the
+	  right "prog-if" for your USB controller(s):  EHCI, OHCI, or UHCI.
+
+if USB_OHCI_HCD
+
+config USB_OHCI_GENERIC
+	bool "Support for generic OHCI USB controller"
+	depends on OF_CONTROL
+	depends on DM_USB
+	select USB_HOST
+	---help---
+	  Enables support for generic OHCI controller.
+
+endif # USB_OHCI_HCD
+
+config USB_UHCI_HCD
+	bool "UHCI HCD (most Intel and VIA) support"
+	select USB_HOST
+	---help---
+	  The Universal Host Controller Interface is a standard by Intel for
+	  accessing the USB hardware in the PC (which is also called the USB
+	  host controller). If your USB host controller conforms to this
+	  standard, you may want to say Y, but see below. All recent boards
+	  with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
+	  i810, i820) conform to this standard. Also all VIA PCI chipsets
+	  (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
+	  133) and LEON/GRLIB SoCs with the GRUSBHC controller.
+	  If unsure, say Y.
+
+if USB_UHCI_HCD
+
+endif # USB_UHCI_HCD