X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fusb%2Fhost%2Fehci-fsl.c;h=97b7f14542591cf22e4e576ddbc21512f1e49fa9;hb=b55b596086292d1675a09ac77b59d51871ce4f46;hp=6cb4d986685c037757aca191dc9490e2a38c3a07;hpb=e7f9350525d73233d4eaf1793f8fe618e9fd4910;p=u-boot diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 6cb4d98668..97b7f14542 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -14,10 +14,15 @@ #include #include #include -#include +#include +#include #include "ehci.h" +#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#endif + static void set_txfifothresh(struct usb_ehci *, u32); /* Check USB PHY clock valid */ @@ -71,7 +76,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, break; default: printf("ERROR: wrong controller index!!\n"); - break; + return -EINVAL; }; *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); @@ -104,15 +109,20 @@ int ehci_hcd_init(int index, enum usb_init_type init, if (!strncmp(phy_type, "utmi", 4)) { #if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY) - setbits_be32(&ehci->control, PHY_CLK_SEL_UTMI); - setbits_be32(&ehci->control, UTMI_PHY_EN); + clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, + PHY_CLK_SEL_UTMI); + clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, + UTMI_PHY_EN); udelay(1000); /* delay required for PHY Clk to appear */ #endif out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI); - setbits_be32(&ehci->control, USB_EN); + clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, + USB_EN); } else { - setbits_be32(&ehci->control, PHY_CLK_SEL_ULPI); - clrsetbits_be32(&ehci->control, UTMI_PHY_EN, USB_EN); + clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, + PHY_CLK_SEL_ULPI); + clrsetbits_be32(&ehci->control, UTMI_PHY_EN | + CONTROL_REGISTER_W1C_MASK, USB_EN); udelay(1000); /* delay required for PHY Clk to appear */ if (!usb_phy_clk_valid(ehci)) return -EINVAL; @@ -125,10 +135,19 @@ int ehci_hcd_init(int index, enum usb_init_type init, in_le32(&ehci->usbmode); - if (SVR_SOC_VER(get_svr()) == SVR_T4240 && - IS_SVR_REV(get_svr(), 2, 0)) + if (has_erratum_a007798()) set_txfifothresh(ehci, TXFIFOTHRESH); + if (has_erratum_a004477()) { + /* + * When reset is issued while any ULPI transaction is ongoing + * then it may result to corruption of ULPI Function Control + * Register which eventually causes phy clock to enter low + * power mode which stops the clock. Thus delay is required + * before reset to let ongoing ULPI transaction complete. + */ + udelay(1); + } return 0; } @@ -154,3 +173,198 @@ static void set_txfifothresh(struct usb_ehci *ehci, u32 txfifo_thresh) cmd |= TXFIFO_THRESH(txfifo_thresh); ehci_writel(&ehci->txfilltuning, cmd); } + +#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) +static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode, + const char *phy_type, int start_offset) +{ + const char *compat_dr = "fsl-usb2-dr"; + const char *compat_mph = "fsl-usb2-mph"; + const char *prop_mode = "dr_mode"; + const char *prop_type = "phy_type"; + const char *node_type = NULL; + int node_offset; + int err; + + node_offset = fdt_node_offset_by_compatible(blob, + start_offset, compat_mph); + if (node_offset < 0) { + node_offset = fdt_node_offset_by_compatible(blob, + start_offset, + compat_dr); + if (node_offset < 0) { + printf("WARNING: could not find compatible node: %s", + fdt_strerror(node_offset)); + return -1; + } + node_type = compat_dr; + } else { + node_type = compat_mph; + } + + if (mode) { + err = fdt_setprop(blob, node_offset, prop_mode, mode, + strlen(mode) + 1); + if (err < 0) + printf("WARNING: could not set %s for %s: %s.\n", + prop_mode, node_type, fdt_strerror(err)); + } + + if (phy_type) { + err = fdt_setprop(blob, node_offset, prop_type, phy_type, + strlen(phy_type) + 1); + if (err < 0) + printf("WARNING: could not set %s for %s: %s.\n", + prop_type, node_type, fdt_strerror(err)); + } + + return node_offset; +} + +static const char *fdt_usb_get_node_type(void *blob, int start_offset, + int *node_offset) +{ + const char *compat_dr = "fsl-usb2-dr"; + const char *compat_mph = "fsl-usb2-mph"; + const char *node_type = NULL; + + *node_offset = fdt_node_offset_by_compatible(blob, start_offset, + compat_mph); + if (*node_offset < 0) { + *node_offset = fdt_node_offset_by_compatible(blob, + start_offset, + compat_dr); + if (*node_offset < 0) { + printf("ERROR: could not find compatible node: %s\n", + fdt_strerror(*node_offset)); + } else { + node_type = compat_dr; + } + } else { + node_type = compat_mph; + } + + return node_type; +} + +static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum, + int start_offset) +{ + int node_offset, err; + const char *node_type = NULL; + + node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset); + if (!node_type) + return -1; + + err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0); + if (err < 0) { + printf("ERROR: could not set %s for %s: %s.\n", + prop_erratum, node_type, fdt_strerror(err)); + } + + return node_offset; +} + +void fdt_fixup_dr_usb(void *blob, bd_t *bd) +{ + static const char * const modes[] = { "host", "peripheral", "otg" }; + static const char * const phys[] = { "ulpi", "utmi", "utmi_dual" }; + int usb_erratum_a006261_off = -1; + int usb_erratum_a007075_off = -1; + int usb_erratum_a007792_off = -1; + int usb_erratum_a005697_off = -1; + int usb_mode_off = -1; + int usb_phy_off = -1; + char str[5]; + int i, j; + + for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) { + const char *dr_mode_type = NULL; + const char *dr_phy_type = NULL; + int mode_idx = -1, phy_idx = -1; + + snprintf(str, 5, "%s%d", "usb", i); + if (hwconfig(str)) { + for (j = 0; j < ARRAY_SIZE(modes); j++) { + if (hwconfig_subarg_cmp(str, "dr_mode", + modes[j])) { + mode_idx = j; + break; + } + } + + for (j = 0; j < ARRAY_SIZE(phys); j++) { + if (hwconfig_subarg_cmp(str, "phy_type", + phys[j])) { + phy_idx = j; + break; + } + } + + if (mode_idx < 0 && phy_idx < 0) { + printf("WARNING: invalid phy or mode\n"); + return; + } + + if (mode_idx > -1) + dr_mode_type = modes[mode_idx]; + + if (phy_idx > -1) + dr_phy_type = phys[phy_idx]; + } + + if (has_dual_phy()) + dr_phy_type = phys[2]; + + usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, + dr_mode_type, NULL, + usb_mode_off); + + if (usb_mode_off < 0) + return; + + usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, + NULL, dr_phy_type, + usb_phy_off); + + if (usb_phy_off < 0) + return; + + if (has_erratum_a006261()) { + usb_erratum_a006261_off = fdt_fixup_usb_erratum + (blob, + "fsl,usb-erratum-a006261", + usb_erratum_a006261_off); + if (usb_erratum_a006261_off < 0) + return; + } + + if (has_erratum_a007075()) { + usb_erratum_a007075_off = fdt_fixup_usb_erratum + (blob, + "fsl,usb-erratum-a007075", + usb_erratum_a007075_off); + if (usb_erratum_a007075_off < 0) + return; + } + + if (has_erratum_a007792()) { + usb_erratum_a007792_off = fdt_fixup_usb_erratum + (blob, + "fsl,usb-erratum-a007792", + usb_erratum_a007792_off); + if (usb_erratum_a007792_off < 0) + return; + } + if (has_erratum_a005697()) { + usb_erratum_a005697_off = fdt_fixup_usb_erratum + (blob, + "fsl,usb-erratum-a005697", + usb_erratum_a005697_off); + if (usb_erratum_a005697_off < 0) + return; + } + } +} +#endif