X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fusb%2Fhost%2Fehci-mx5.c;h=adbed5c90ca54717baa7e42d42a41fdf3599716f;hb=612404c28a64a6df300642a1550a65dcc8e01f82;hp=46973b01bdaca135ff94eeedb1871d6def075525;hpb=bdc5202068ec778ae2eecb818559ce7c61057109;p=u-boot

diff --git a/drivers/usb/host/ehci-mx5.c b/drivers/usb/host/ehci-mx5.c
index 46973b01bd..adbed5c90c 100644
--- a/drivers/usb/host/ehci-mx5.c
+++ b/drivers/usb/host/ehci-mx5.c
@@ -32,35 +32,57 @@
 #define MXC_OTG_OFFSET			0
 #define MXC_H1_OFFSET			0x200
 #define MXC_H2_OFFSET			0x400
+#define MXC_H3_OFFSET			0x600
 
 #define MXC_USBCTRL_OFFSET		0
 #define MXC_USB_PHY_CTR_FUNC_OFFSET	0x8
 #define MXC_USB_PHY_CTR_FUNC2_OFFSET	0xc
 #define MXC_USB_CTRL_1_OFFSET		0x10
 #define MXC_USBH2CTRL_OFFSET		0x14
+#define MXC_USBH3CTRL_OFFSET		0x18
 
 /* USB_CTRL */
 /* OTG wakeup intr enable */
 #define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)
 /* OTG power mask */
 #define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)
+/* OTG power pin polarity */
+#define MXC_OTG_UCTRL_O_PWR_POL_BIT	(1 << 24)
 /* Host1 ULPI interrupt enable */
 #define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)
 /* HOST1 wakeup intr enable */
 #define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)
 /* HOST1 power mask */
 #define MXC_H1_UCTRL_H1PM_BIT		(1 << 8)
+/* HOST1 power pin polarity */
+#define MXC_H1_UCTRL_H1_PWR_POL_BIT	(1 << 8)
 
 /* USB_PHY_CTRL_FUNC */
+/* OTG Polarity of Overcurrent */
+#define MXC_OTG_PHYCTRL_OC_POL_BIT	(1 << 9)
 /* OTG Disable Overcurrent Event */
 #define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)
+/* UH1 Polarity of Overcurrent */
+#define MXC_H1_OC_POL_BIT		(1 << 6)
 /* UH1 Disable Overcurrent Event */
 #define MXC_H1_OC_DIS_BIT		(1 << 5)
+/* OTG Power Pin Polarity */
+#define MXC_OTG_PHYCTRL_PWR_POL_BIT	(1 << 3)
 
 /* USBH2CTRL */
+#define MXC_H2_UCTRL_H2_OC_POL_BIT	(1 << 31)
+#define MXC_H2_UCTRL_H2_OC_DIS_BIT	(1 << 30)
 #define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
 #define MXC_H2_UCTRL_H2WIE_BIT		(1 << 7)
 #define MXC_H2_UCTRL_H2PM_BIT		(1 << 4)
+#define MXC_H2_UCTRL_H2_PWR_POL_BIT	(1 << 4)
+
+/* USBH3CTRL */
+#define MXC_H3_UCTRL_H3_OC_POL_BIT	(1 << 31)
+#define MXC_H3_UCTRL_H3_OC_DIS_BIT	(1 << 30)
+#define MXC_H3_UCTRL_H3UIE_BIT		(1 << 8)
+#define MXC_H3_UCTRL_H3WIE_BIT		(1 << 7)
+#define MXC_H3_UCTRL_H3_PWR_POL_BIT	(1 << 4)
 
 /* USB_CTRL_1 */
 #define MXC_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
@@ -150,20 +172,38 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 		if (flags & MXC_EHCI_INTERNAL_PHY) {
 			v = __raw_readl(usbother_base +
 					MXC_USB_PHY_CTR_FUNC_OFFSET);
+			if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+				v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
+			else
+				v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
 			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				/* OC/USBPWR is used */
+				v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+			else
 				/* OC/USBPWR is not used */
 				v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
+#ifdef CONFIG_MX51
+			if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+				v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
 			else
-				/* OC/USBPWR is used */
-				v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+				v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
+#endif
 			__raw_writel(v, usbother_base +
 					MXC_USB_PHY_CTR_FUNC_OFFSET);
 
 			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+#ifdef CONFIG_MX51
 			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v &= ~MXC_OTG_UCTRL_OPM_BIT;
+			else
 				v |= MXC_OTG_UCTRL_OPM_BIT;
+#endif
+#ifdef CONFIG_MX53
+			if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+				v |= MXC_OTG_UCTRL_O_PWR_POL_BIT;
 			else
-				v &= ~MXC_OTG_UCTRL_OPM_BIT;
+				v &= ~MXC_OTG_UCTRL_O_PWR_POL_BIT;
+#endif
 			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 		}
 		break;
@@ -177,13 +217,25 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 #endif
 
 		v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+#ifdef CONFIG_MX51
 		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 			v &= ~MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask unused */
 		else
 			v |= MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask used */
+#endif
+#ifdef CONFIG_MX53
+		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+			v |= MXC_H1_UCTRL_H1_PWR_POL_BIT;
+		else
+			v &= ~MXC_H1_UCTRL_H1_PWR_POL_BIT;
+#endif
 		__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 
 		v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+		if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+			v |= MXC_H1_OC_POL_BIT;
+		else
+			v &= ~MXC_H1_OC_POL_BIT;
 		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 			v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
 		else
@@ -193,24 +245,59 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 		break;
 	case 2: /* Host 2 ULPI */
 		v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
+#ifdef CONFIG_MX51
 		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 			v &= ~MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask unused */
 		else
 			v |= MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask used */
-
+#endif
+#ifdef CONFIG_MX53
+		if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+			v |= MXC_H2_UCTRL_H2_OC_POL_BIT;
+		else
+			v &= ~MXC_H2_UCTRL_H2_OC_POL_BIT;
+		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			v &= ~MXC_H2_UCTRL_H2_OC_DIS_BIT; /* OC is used */
+		else
+			v |= MXC_H2_UCTRL_H2_OC_DIS_BIT; /* OC is not used */
+		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+			v |= MXC_H2_UCTRL_H2_PWR_POL_BIT;
+		else
+			v &= ~MXC_H2_UCTRL_H2_PWR_POL_BIT;
+#endif
 		__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
 		break;
+#ifdef CONFIG_MX53
+	case 3: /* Host 3 ULPI */
+		v = __raw_readl(usbother_base + MXC_USBH3CTRL_OFFSET);
+		if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+			v |= MXC_H3_UCTRL_H3_OC_POL_BIT;
+		else
+			v &= ~MXC_H3_UCTRL_H3_OC_POL_BIT;
+		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			v &= ~MXC_H3_UCTRL_H3_OC_DIS_BIT; /* OC is used */
+		else
+			v |= MXC_H3_UCTRL_H3_OC_DIS_BIT; /* OC is not used */
+		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+			v |= MXC_H3_UCTRL_H3_PWR_POL_BIT;
+		else
+			v &= ~MXC_H3_UCTRL_H3_PWR_POL_BIT;
+		__raw_writel(v, usbother_base + MXC_USBH3CTRL_OFFSET);
+		break;
+#endif
 	}
 
 	return ret;
 }
 
-void __board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
+int __weak board_ehci_hcd_init(int port)
 {
+	return 0;
 }
 
-void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
-	__attribute((weak, alias("__board_ehci_hcd_postinit")));
+void __weak board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
+{
+}
 
 int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {