X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fusb%2Fhost%2Fisp116x-hcd.c;h=19e16a4a804bbacf9efdee693ba9174f6ec6024b;hb=cae4a8a2a81ca6cd16d5de1b55d47e315cbff05a;hp=7aff54bce172c3423a667e87068b1eb68fbdfcb9;hpb=792a09eb9d5d8c4f74b7e9f2e887316d511a4e80;p=u-boot

diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 7aff54bce1..19e16a4a80 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -42,7 +42,7 @@
  *
  *    [[GNU/GPL disclaimer]]
  *
- * and in part from AU1x00 OHCI HCD driver "u-boot/cpu/mips/au1x00_usb_ohci.c"
+ * and in part from AU1x00 OHCI HCD driver "u-boot/arch/mips/cpu/au1x00_usb_ohci.c"
  * (original copyright message follows):
  *
  *    URB OHCI HCD (Host Controller Driver) for USB on the AU1x00.
@@ -578,7 +578,7 @@ static int isp116x_interrupt(struct isp116x *isp116x)
 			/* When root hub or any of its ports is going
 			   to come out of suspend, it may take more
 			   than 10ms for status bits to stabilize. */
-			wait_ms(20);
+			mdelay(20);
 		}
 
 		if (intstat & HCINT_SO) {
@@ -679,7 +679,7 @@ retry_same:
 	/* Pack data into FIFO ram */
 	pack_fifo(isp116x, dev, pipe, ptd, 1, buffer, len);
 #ifdef EXTRA_DELAY
-	wait_ms(EXTRA_DELAY);
+	mdelay(EXTRA_DELAY);
 #endif
 
 	/* Start the data transfer */
@@ -983,11 +983,11 @@ static int isp116x_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
 						       HCRHPORT1 + wIndex - 1);
 				if (!(tmp & RH_PS_PRS))
 					break;
-				wait_ms(1);
+				mdelay(1);
 			}
 			isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
 					    RH_PS_PRS);
-			wait_ms(10);
+			mdelay(10);
 
 			len = 0;
 			break;
@@ -1251,7 +1251,7 @@ static int isp116x_sw_reset(struct isp116x *isp116x)
 	isp116x_write_reg32(isp116x, HCCMDSTAT, HCCMDSTAT_HCR);
 	while (--retries) {
 		/* It usually resets within 1 ms */
-		wait_ms(1);
+		mdelay(1);
 		if (!(isp116x_read_reg32(isp116x, HCCMDSTAT) & HCCMDSTAT_HCR))
 			break;
 	}
@@ -1278,7 +1278,7 @@ static int isp116x_reset(struct isp116x *isp116x)
 		clkrdy = isp116x_read_reg16(isp116x, HCuPINT) & HCuPINT_CLKRDY;
 		if (clkrdy)
 			break;
-		wait_ms(1);
+		mdelay(1);
 	}
 	if (!clkrdy) {
 		ERR("clock not ready after %dms", timeout);
@@ -1391,7 +1391,7 @@ int isp116x_check_id(struct isp116x *isp116x)
 	return 0;
 }
 
-int usb_lowlevel_init(void)
+int usb_lowlevel_init(int index, void **controller))
 {
 	struct isp116x *isp116x = &isp116x_dev;
 
@@ -1428,7 +1428,7 @@ int usb_lowlevel_init(void)
 	return 0;
 }
 
-int usb_lowlevel_stop(void)
+int usb_lowlevel_stop(int index)
 {
 	struct isp116x *isp116x = &isp116x_dev;