X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fusb%2Fhost%2Fxhci-exynos5.c;h=3f86fdca8973cb901e88d109e9d65e0f63f86e21;hb=85d5e7075f33e97079886027104591ff53d6363b;hp=1146d101de40901d5789c342c3716a2f2a1b7aaf;hpb=d44a5f51288aec60c6bdb4ac939d75c24e5bf9c2;p=u-boot

diff --git a/drivers/usb/host/xhci-exynos5.c b/drivers/usb/host/xhci-exynos5.c
index 1146d101de..3f86fdca89 100644
--- a/drivers/usb/host/xhci-exynos5.c
+++ b/drivers/usb/host/xhci-exynos5.c
@@ -40,7 +40,7 @@ struct exynos_xhci {
 	struct exynos_usb3_phy *usb3_phy;
 	struct xhci_hccr *hcd;
 	struct dwc3 *dwc3_reg;
-	struct fdt_gpio_state vbus_gpio;
+	struct gpio_desc vbus_gpio;
 };
 
 static struct exynos_xhci exynos;
@@ -69,7 +69,8 @@ static int exynos_usb3_parse_dt(const void *blob, struct exynos_xhci *exynos)
 	exynos->hcd = (struct xhci_hccr *)addr;
 
 	/* Vbus gpio */
-	fdtdec_decode_gpio(blob, node, "samsung,vbus-gpio", &exynos->vbus_gpio);
+	gpio_request_by_name_nodev(blob, node, "samsung,vbus-gpio", 0,
+				   &exynos->vbus_gpio, GPIOD_IS_OUT);
 
 	depth = 0;
 	node = fdtdec_next_compatible_subnode(blob, node,
@@ -181,7 +182,7 @@ static void exynos5_usb3_phy_exit(struct exynos_usb3_phy *phy)
 	set_usbdrd_phy_ctrl(POWER_USB_DRD_PHY_CTRL_DISABLE);
 }
 
-void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
+static void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
 {
 	clrsetbits_le32(&dwc3_reg->g_ctl,
 			DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG),
@@ -298,8 +299,8 @@ int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
 
 #ifdef CONFIG_OF_CONTROL
 	/* setup the Vbus gpio here */
-	if (!fdtdec_setup_gpio(&ctx->vbus_gpio))
-		gpio_direction_output(ctx->vbus_gpio.gpio, 1);
+	if (dm_gpio_is_valid(&ctx->vbus_gpio))
+		dm_gpio_set_value(&ctx->vbus_gpio, 1);
 #endif
 
 	ret = exynos_xhci_core_init(ctx);