X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=drivers%2Fvideo%2FKconfig;h=4c4d2861fe78d1e80cd851bdc653152915ab7c30;hb=b4f901042807e59061a862adc265d8f899b2243f;hp=61dfed8c06360f243bc5ff32c20e0fbc6ba1e58f;hpb=a9f47426ced2e5057930990f3cd602b8ab936f69;p=u-boot

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 61dfed8c06..4c4d2861fe 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -14,6 +14,27 @@ config DM_VIDEO
 	  option compiles in the video uclass and routes all LCD/video access
 	  through this.
 
+config BACKLIGHT_PWM
+	bool "Generic PWM based Backlight Driver"
+	depends on DM_VIDEO && DM_PWM
+	default y
+	help
+	  If you have a LCD backlight adjustable by PWM, say Y to enable
+	  this driver.
+	  This driver can be use with "simple-panel" and
+	  it understands the standard device tree
+	  (leds/backlight/pwm-backlight.txt)
+
+config BACKLIGHT_GPIO
+	bool "Generic GPIO based Backlight Driver"
+	depends on DM_VIDEO
+	help
+	  If you have a LCD backlight adjustable by GPIO, say Y to enable
+	  this driver.
+	  This driver can be used with "simple-panel" and
+	  it understands the standard device tree
+	  (leds/backlight/gpio-backlight.txt)
+
 config VIDEO_BPP8
 	bool "Support 8-bit-per-pixel displays"
 	depends on DM_VIDEO
@@ -44,6 +65,14 @@ config VIDEO_BPP32
 	  this option, such displays will not be supported and console output
 	  will be empty.
 
+config VIDEO_ANSI
+	bool "Support ANSI escape sequences in video console"
+	depends on DM_VIDEO
+	default y if DM_VIDEO
+	help
+	  Enable ANSI escape sequence decoding for a more fully functional
+	  console.
+
 config CONSOLE_NORMAL
 	bool "Support a simple text console"
 	depends on DM_VIDEO
@@ -98,6 +127,14 @@ config SYS_WHITE_ON_BLACK
 	 better in low-light situations or to reduce eye strain in some
 	 cases.
 
+config NO_FB_CLEAR
+	bool "Skip framebuffer clear"
+	help
+	  If firmware (whatever loads u-boot) has already put a splash image
+	  on screen, you might want to preserve it until whatever u-boot
+	  loads takes over the screen.  This, for example, can be used to
+	  keep splash image on screen until grub graphical boot menu starts.
+
 source "drivers/video/fonts/Kconfig"
 
 config VIDCONSOLE_AS_LCD
@@ -137,7 +174,7 @@ config FRAMEBUFFER_SET_VESA_MODE
 
 choice
 	prompt "framebuffer graphics resolution"
-	default FRAMEBUFFER_VESA_MODE_117
+	default FRAMEBUFFER_VESA_MODE_118
 	depends on FRAMEBUFFER_SET_VESA_MODE
 	help
 	  This option sets the resolution used for the U-Boot framebuffer (and
@@ -436,6 +473,8 @@ config VIDEO_SANDBOX_SDL
 	  console device and can display stdout output. Within U-Boot is is
 	  a normal bitmap display and can display images as well as text.
 
+source "drivers/video/stm32/Kconfig"
+
 config VIDEO_TEGRA20
 	bool "Enable LCD support on Tegra20"
 	depends on OF_CONTROL
@@ -562,36 +601,9 @@ config CONSOLE_SCROLL_LINES
 	  console jump but can help speed up operation when scrolling
 	  is slow.
 
-config VIDEO_CT69000
-	bool "Enable Chips & Technologies 69000 video driver"
-	depends on VIDEO
-	help
-	  This enables a frame buffer driver for the Chips & Technologies
-	  ct69000, a fairly old graphics device (circa 2000) which is used
-	  on some hardware. It operates over the ISA bus, and supports
-	  some acceleration features.
-
-	  For the CT69000 and SMI_LYNXEM drivers, videomode is
-		selected via environment 'videomode'. Two different ways
-		are possible:
-		- "videomode=num"   'num' is a standard LiLo mode numbers.
-		Following standard modes are supported	(* is default):
-
-		      Colors	640x480 800x600 1024x768 1152x864 1280x1024
-		-------------+---------------------------------------------
-		      8 bits |	0x301*	0x303	 0x305	  0x161	    0x307
-		     15 bits |	0x310	0x313	 0x316	  0x162	    0x319
-		     16 bits |	0x311	0x314	 0x317	  0x163	    0x31A
-		     24 bits |	0x312	0x315	 0x318	    ?	    0x31B
-		-------------+---------------------------------------------
-		(i.e. setenv videomode 317; saveenv; reset;)
-
-		- "videomode=bootargs" all the video parameters are parsed
-		from the bootargs. (See drivers/video/videomodes.c)
-
 config SYS_CONSOLE_BG_COL
 	hex "Background colour"
-	depends on CFB_CONSOLE || VIDEO_CT69000
+	depends on CFB_CONSOLE
 	default 0x00
 	help
 	  Defines the background colour for the console. The value is from
@@ -602,7 +614,7 @@ config SYS_CONSOLE_BG_COL
 
 config SYS_CONSOLE_FG_COL
 	hex "Foreground colour"
-	depends on CFB_CONSOLE || VIDEO_CT69000
+	depends on CFB_CONSOLE
 	default 0xa0
 	help
 	  Defines the foreground colour for the console. The value is from
@@ -628,4 +640,22 @@ config VIDEO_DW_HDMI
 	  rather requires a SoC-specific glue driver to call it), it
 	  can not be enabled from the configuration menu.
 
+config VIDEO_SIMPLE
+	bool "Simple display driver for preconfigured display"
+	help
+	  Enables a simple generic display driver which utilizes the
+	  simple-framebuffer devicetree bindings.
+
+	  This driver assumes that the display hardware has been initialized
+	  before u-boot starts, and u-boot will simply render to the pre-
+	  allocated frame buffer surface.
+
+config VIDEO_DT_SIMPLEFB
+	bool "Enable SimpleFB support for passing framebuffer to OS"
+	help
+	  Enables the code to pass the framebuffer to the kernel as a
+	  simple framebuffer in the device tree.
+	  The video output is initialized by U-Boot, and kept by the
+	  kernel.
+
 endmenu