X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=env%2FKconfig;h=f12ef286345855eb604109df7cc70b4d95c48673;hb=e3f24d4f2c4ce48f666ef6098e166521dde6f688;hp=20321f862e182b20c6b3bfbda19e13da25cf6182;hpb=e94c1268f262b521e972ee6fb4915520fe5af306;p=u-boot

diff --git a/env/Kconfig b/env/Kconfig
index 20321f862e..f12ef28634 100644
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -68,40 +68,10 @@ config ENV_IS_IN_EEPROM
 	  These two #defines specify the offset and size of the
 	  environment area within the total memory of your EEPROM.
 
-	  - CONFIG_SYS_I2C_EEPROM_ADDR:
-	  If defined, specified the chip address of the EEPROM device.
-	  The default address is zero.
-
-	  - CONFIG_SYS_I2C_EEPROM_BUS:
-	  If defined, specified the i2c bus of the EEPROM device.
-
-	  - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS:
-	  If defined, the number of bits used to address bytes in a
-	  single page in the EEPROM device.  A 64 byte page, for example
-	  would require six bits.
-
-	  - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS:
-	  If defined, the number of milliseconds to delay between
-	  page writes.	The default is zero milliseconds.
-
-	  - CONFIG_SYS_I2C_EEPROM_ADDR_LEN:
-	  The length in bytes of the EEPROM memory array address.  Note
-	  that this is NOT the chip address length!
-
-	  - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW:
-	  EEPROM chips that implement "address overflow" are ones
-	  like Catalyst 24WC04/08/16 which has 9/10/11 bits of
-	  address and the extra bits end up in the "chip address" bit
-	  slots. This makes a 24WC08 (1Kbyte) chip look like four 256
-	  byte chips.
-
 	  Note that we consider the length of the address field to
 	  still be one byte because the extra address bits are hidden
 	  in the chip address.
 
-	  - CONFIG_SYS_EEPROM_SIZE:
-	  The size in bytes of the EEPROM device.
-
 	  - CONFIG_ENV_EEPROM_IS_ON_I2C
 	  define this, if you have I2C and SPI activated, and your
 	  EEPROM, which holds the environment, is on the I2C bus.