X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=i3.config;h=e45b31ba40576f3ae7ed768cf77a86c23b525c98;hb=8d2799c251cc1c44f1429c36817c346fa56b9701;hp=48091eac2662e4b7f50804e07640cfc2e897f34f;hpb=6de212f7eec993346d24af5333ceedfe7849a2f6;p=i3%2Fi3 diff --git a/i3.config b/i3.config index 48091eac..e45b31ba 100644 --- a/i3.config +++ b/i3.config @@ -1,127 +1,155 @@ -# This configuration uses Mod1 and Mod3. Make sure they are mapped properly using xev(1) -# and xmodmap(1). Usually, Mod1 is Alt (Alt_L) and Mod3 is Windows (Super_L) - -# Tell i3 about your preferred terminal. You can refer to this as $terminal -# later. It is recommended to set this option to allow i3 to open a terminal -# containing the introduction on first start. -terminal /usr/bin/urxvt - -# ISO 10646 = Unicode +# i3 config file (v4) +# +# Please see http://i3wm.org/docs/userguide.html for a complete reference! +# +# This config file uses keycodes (bindsym) and was written for the QWERTY +# layout. +# +# To get a config file with the same key positions, but for your current +# layout, use the i3-config-wizard +# + +# Font for window titles. Will also be used by the bar unless a different font +# is used in the bar {} block below. ISO 10646 = Unicode font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1 +# The font above is very space-efficient, that is, it looks good, sharp and +# clear in small sizes. However, if you need a lot of unicode glyphs or +# right-to-left text rendering, you should instead use pango for rendering and +# chose an xft font, such as: +# font xft:DejaVu Sans Mono 10 -# Use Mouse+Mod1 to drag floating windows to their wanted position +# use Mouse+Mod1 to drag floating windows to their wanted position floating_modifier Mod1 -# Fullscreen (Mod1+f) -bind Mod1+41 f - -# Stacking (Mod1+h) -bind Mod1+43 s - -# Tabbed (Mod1+w) -bind Mod1+25 T - -# Default (Mod1+e) -bind Mod1+26 d - -# Toggle tiling/floating of the current window (Mod1+Shift+Space) -bind Mod1+Shift+65 t - -# Go into the tiling layer / floating layer, depending on whether -# the current window is tiling / floating (Mod1+t) -bind Mod1+28 focus ft - -# Focus (Mod1+j/k/l/;) -bind Mod1+44 h -bind Mod1+45 j -bind Mod1+46 k -bind Mod1+47 l -# (alternatively, you can use the cursor keys:) -bindsym Mod1+Left h -bindsym Mod1+Down j -bindsym Mod1+Up k -bindsym Mod1+Right l - -# Focus Container (Mod3+j/k/l/;) -bind Mod3+44 wch -bind Mod3+45 wcj -bind Mod3+46 wck -bind Mod3+47 wcl -# (alternatively, you can use the cursor keys:) -bindsym Mod3+Left wch -bindsym Mod3+Down wcj -bindsym Mod3+Up wck -bindsym Mod3+Right wcl - -# Snap (Mod1+Control+j/k/l/;) -bind Mod1+Control+44 sh -bind Mod1+Control+45 sj -bind Mod1+Control+46 sk -bind Mod1+Control+47 sl -# (alternatively, you can use the cursor keys:) -bindsym Mod1+Control+Left sh -bindsym Mod1+Control+Down sj -bindsym Mod1+Control+Up sk -bindsym Mod1+Control+Right sl - -# Move (Mod1+Shift+j/k/l/;) -bind Mod1+Shift+44 mh -bind Mod1+Shift+45 mj -bind Mod1+Shift+46 mk -bind Mod1+Shift+47 ml -# (alternatively, you can use the cursor keys:) -bindsym Mod1+Shift+Left mh -bindsym Mod1+Shift+Down mj -bindsym Mod1+Shift+Up mk -bindsym Mod1+Shift+Right ml - -# Move Container (Mod3+Shift+j/k/l/;) -bind Mod3+Shift+44 wcmh -bind Mod3+Shift+45 wcmj -bind Mod3+Shift+46 wcmk -bind Mod3+Shift+47 wcml - -# Workspaces (Mod1+1/2/…) -bind Mod1+10 1 -bind Mod1+11 2 -bind Mod1+12 3 -bind Mod1+13 4 -bind Mod1+14 5 -bind Mod1+15 6 -bind Mod1+16 7 -bind Mod1+17 8 -bind Mod1+18 9 -bind Mod1+19 10 - -# Move to Workspaces -bind Mod1+Shift+10 m1 -bind Mod1+Shift+11 m2 -bind Mod1+Shift+12 m3 -bind Mod1+Shift+13 m4 -bind Mod1+Shift+14 m5 -bind Mod1+Shift+15 m6 -bind Mod1+Shift+16 m7 -bind Mod1+Shift+17 m8 -bind Mod1+Shift+18 m9 -bind Mod1+Shift+19 m10 - -# Mod1+Enter starts a new terminal -bind Mod1+36 exec /usr/bin/urxvt - -# Mod1+Shift+q kills the current client -bind Mod1+Shift+24 kill - -# Mod1+v starts dmenu and launches the selected application -# for now, we don’t have an own launcher -bind Mod1+55 exec /usr/bin/dmenu_run - -# Mod1+Shift+e exits i3 -bind Mod1+Shift+26 exit - -# Mod1+Shift+r restarts i3 inplace -bind Mod1+Shift+27 restart - -############################################################# -# DELETE THE FOLLOWING LINES TO DISABLE THE WELCOME MESSAGE # -############################################################# -exec xmessage -file /etc/i3/welcome +# start a terminal +bindsym Mod1+Return exec i3-sensible-terminal + +# kill focused window +bindsym Mod1+Shift+q kill + +# start dmenu (a program launcher) +bindsym Mod1+d exec dmenu_run + +# change focus +bindsym Mod1+j focus left +bindsym Mod1+k focus down +bindsym Mod1+l focus up +bindsym Mod1+semicolon focus right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Left focus left +bindsym Mod1+Down focus down +bindsym Mod1+Up focus up +bindsym Mod1+Right focus right + +# move focused window +bindsym Mod1+Shift+j move left +bindsym Mod1+Shift+k move down +bindsym Mod1+Shift+l move up +bindsym Mod1+Shift+semicolon move right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Shift+Left move left +bindsym Mod1+Shift+Down move down +bindsym Mod1+Shift+Up move up +bindsym Mod1+Shift+Right move right + +# split in horizontal orientation +bindsym Mod1+h split h + +# split in vertical orientation +bindsym Mod1+v split v + +# enter fullscreen mode for the focused container +bindsym Mod1+f fullscreen + +# change container layout (stacked, tabbed, toggle split) +bindsym Mod1+s layout stacking +bindsym Mod1+w layout tabbed +bindsym Mod1+e layout toggle split + +# toggle tiling / floating +bindsym Mod1+Shift+space floating toggle + +# change focus between tiling / floating windows +bindsym Mod1+space focus mode_toggle + +# focus the parent container +bindsym Mod1+a focus parent + +# focus the child container +#bindsym Mod1+d focus child + +# switch to workspace +bindsym Mod1+1 workspace 1 +bindsym Mod1+2 workspace 2 +bindsym Mod1+3 workspace 3 +bindsym Mod1+4 workspace 4 +bindsym Mod1+5 workspace 5 +bindsym Mod1+6 workspace 6 +bindsym Mod1+7 workspace 7 +bindsym Mod1+8 workspace 8 +bindsym Mod1+9 workspace 9 +bindsym Mod1+0 workspace 10 + +# move focused container to workspace +bindsym Mod1+Shift+1 move container to workspace 1 +bindsym Mod1+Shift+2 move container to workspace 2 +bindsym Mod1+Shift+3 move container to workspace 3 +bindsym Mod1+Shift+4 move container to workspace 4 +bindsym Mod1+Shift+5 move container to workspace 5 +bindsym Mod1+Shift+6 move container to workspace 6 +bindsym Mod1+Shift+7 move container to workspace 7 +bindsym Mod1+Shift+8 move container to workspace 8 +bindsym Mod1+Shift+9 move container to workspace 9 +bindsym Mod1+Shift+0 move container to workspace 10 + +# reload the configuration file +bindsym Mod1+Shift+c reload +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) +bindsym Mod1+Shift+r restart +# exit i3 (logs you out of your X session) +bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'" + +# resize window (you can also use the mouse for that) +mode "resize" { + # These bindings trigger as soon as you enter the resize mode + + # Pressing left will shrink the window’s width. + # Pressing right will grow the window’s width. + # Pressing up will shrink the window’s height. + # Pressing down will grow the window’s height. + bindsym j resize shrink width 10 px or 10 ppt + bindsym k resize grow height 10 px or 10 ppt + bindsym l resize shrink height 10 px or 10 ppt + bindsym semicolon resize grow width 10 px or 10 ppt + + # same bindings, but for the arrow keys + bindsym Left resize shrink width 10 px or 10 ppt + bindsym Down resize grow height 10 px or 10 ppt + bindsym Up resize shrink height 10 px or 10 ppt + bindsym Right resize grow width 10 px or 10 ppt + + # back to normal: Enter or Escape + bindsym Return mode "default" + bindsym Escape mode "default" +} + +bindsym Mod1+r mode "resize" + +# Start i3bar to display a workspace bar (plus the system information i3status +# finds out, if available) +bar { + status_command i3status +} + +####################################################################### +# automatically start i3-config-wizard to offer the user to create a +# keysym-based config which used his favorite modifier (alt or windows) +# +# i3-config-wizard will not launch if there already is a config file +# in ~/.i3/config. +# +# Please remove the following exec line: +####################################################################### +exec i3-config-wizard