X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Faxp221.h;h=9c871623a87fbdbe5d2251dbce36311753bf4a46;hb=bdf1fe4e68b0d240f0ee666ea9d92d3f42f1a23f;hp=6f24a617b67263f5fd43b5c10629f022cb9e5a03;hpb=aed03faa064cca56847571b13cbd4c849c6116aa;p=u-boot

diff --git a/include/axp221.h b/include/axp221.h
index 6f24a617b6..9c871623a8 100644
--- a/include/axp221.h
+++ b/include/axp221.h
@@ -6,14 +6,6 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#define AXP221_CHIP_ADDR 0x68
-#define AXP221_CTRL_ADDR 0x3e
-#define AXP221_INIT_DATA 0x3e
-
-#define AXP223_DEVICE_ADDR 0x3a3
-#define AXP223_RUNTIME_ADDR 0x2d
-#define AXP223_DEVICE_MODE_DATA 0x7c3e00
-
 /* Page 0 addresses */
 #define AXP221_CHIP_ID		0x03
 #define AXP221_OUTPUT_CTRL1	0x10
@@ -60,8 +52,16 @@
 /* Page 1 addresses */
 #define AXP221_SID		0x20
 
-/* We support drivebus control */
-#define AXP_DRIVEBUS
+/* For axp_gpio.c */
+#define AXP_POWER_STATUS		0x00
+#define AXP_POWER_STATUS_VBUS_PRESENT		(1 << 5)
+#define AXP_GPIO0_CTRL			0x90
+#define AXP_GPIO1_CTRL			0x92
+#define AXP_GPIO_CTRL_OUTPUT_LOW		0x00 /* Drive pin low */
+#define AXP_GPIO_CTRL_OUTPUT_HIGH		0x01 /* Drive pin high */
+#define AXP_GPIO_CTRL_INPUT			0x02 /* Input */
+#define AXP_GPIO_STATE			0x94
+#define AXP_GPIO_STATE_OFFSET			0
 
 int axp221_set_dcdc1(unsigned int mvolt);
 int axp221_set_dcdc2(unsigned int mvolt);
@@ -78,5 +78,3 @@ int axp221_set_aldo3(unsigned int mvolt);
 int axp221_set_eldo(int eldo_num, unsigned int mvolt);
 int axp221_init(void);
 int axp221_get_sid(unsigned int *sid);
-int axp_drivebus_enable(void);
-int axp_drivebus_disable(void);