X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fcmd_confdefs.h;h=9b4545f7b60aa396a66a38ce04729c81c9760950;hb=b3631487105a57ab7cbadfc26efbaf9676275018;hp=6f8154c8ed22bfab5361a2613ff2bdf674fef112;hpb=cbd8a35c6dbaaca35494cbec319960887ad02dcf;p=u-boot diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h index 6f8154c8ed..9b4545f7b6 100644 --- a/include/cmd_confdefs.h +++ b/include/cmd_confdefs.h @@ -22,7 +22,7 @@ */ /* - * Definitions for Configuring the monitor commands + * Definitions for Configuring the monitor commands */ #ifndef _CMD_CONFIG_H #define _CMD_CONFIG_H @@ -30,65 +30,73 @@ /* * Configurable monitor commands */ -#define CFG_CMD_BDI 0x00000001U /* bdinfo */ -#define CFG_CMD_LOADS 0x00000002U /* loads */ -#define CFG_CMD_LOADB 0x00000004U /* loadb */ -#define CFG_CMD_IMI 0x00000008U /* iminfo */ -#define CFG_CMD_CACHE 0x00000010U /* icache, dcache */ -#define CFG_CMD_FLASH 0x00000020U /* flinfo, erase, protect */ -#define CFG_CMD_MEMORY 0x00000040U /* md, mm, nm, mw, cp, cmp, */ +#define CFG_CMD_BDI 0x00000001ULL /* bdinfo */ +#define CFG_CMD_LOADS 0x00000002ULL /* loads */ +#define CFG_CMD_LOADB 0x00000004ULL /* loadb */ +#define CFG_CMD_IMI 0x00000008ULL /* iminfo */ +#define CFG_CMD_CACHE 0x00000010ULL /* icache, dcache */ +#define CFG_CMD_FLASH 0x00000020ULL /* flinfo, erase, protect */ +#define CFG_CMD_MEMORY 0x00000040ULL /* md, mm, nm, mw, cp, cmp, */ /* crc, base, loop, mtest */ -#define CFG_CMD_NET 0x00000080U /* bootp, tftpboot, rarpboot */ -#define CFG_CMD_ENV 0x00000100U /* saveenv */ -#define CFG_CMD_KGDB 0x00000200U /* kgdb */ -#define CFG_CMD_PCMCIA 0x00000400U /* PCMCIA support */ -#define CFG_CMD_IDE 0x00000800U /* IDE harddisk support */ -#define CFG_CMD_PCI 0x00001000U /* pciinfo */ -#define CFG_CMD_IRQ 0x00002000U /* irqinfo */ -#define CFG_CMD_BOOTD 0x00004000U /* bootd */ -#define CFG_CMD_CONSOLE 0x00008000U /* coninfo */ -#define CFG_CMD_EEPROM 0x00010000U /* EEPROM read/write support */ -#define CFG_CMD_ASKENV 0x00020000U /* ask for env variable */ -#define CFG_CMD_RUN 0x00040000U /* run command in env variable */ -#define CFG_CMD_ECHO 0x00080000U /* echo arguments */ -#define CFG_CMD_I2C 0x00100000U /* I2C serial bus support */ -#define CFG_CMD_REGINFO 0x00200000U /* Register dump */ -#define CFG_CMD_IMMAP 0x00400000U /* IMMR dump support */ -#define CFG_CMD_DATE 0x00800000U /* support for RTC, date/time...*/ -#define CFG_CMD_DHCP 0x01000000U /* DHCP Support */ -#define CFG_CMD_BEDBUG 0x02000000U /* Include BedBug Debugger */ -#define CFG_CMD_FDC 0x04000000U /* Floppy Disk Support */ -#define CFG_CMD_SCSI 0x08000000U /* SCSI Support */ -#define CFG_CMD_AUTOSCRIPT 0x10000000U /* Autoscript Support */ -#define CFG_CMD_MII 0x20000000U /* MII support */ -#define CFG_CMD_SETGETDCR 0x40000000U /* DCR support on 4xx */ -#define CFG_CMD_BSP 0x80000000U /* Board Specific functions */ - -#define CFG_CMD_ELF 0x0000000100000000U /* ELF (VxWorks) load/boot cmd */ -#define CFG_CMD_MISC 0x0000000200000000U /* Misc functions like sleep etc*/ -#define CFG_CMD_USB 0x0000000400000000U /* USB Support */ -#define CFG_CMD_DOC 0x0000000800000000U /* Disk-On-Chip Support */ -#define CFG_CMD_JFFS2 0x0000001000000000U /* JFFS2 Support */ -#define CFG_CMD_DTT 0x0000002000000000U /* Digital Therm and Thermostat */ -#define CFG_CMD_SDRAM 0x0000004000000000U /* SDRAM DIMM SPD info printout */ -#define CFG_CMD_DIAG 0x0000008000000000U /* Diagnostics */ -#define CFG_CMD_FPGA 0x0000010000000000U /* FPGA configuration Support */ -#define CFG_CMD_HWFLOW 0x0000020000000000U /* RTS/CTS hw flow control */ -#define CFG_CMD_SAVES 0x0000040000000000U /* save S record dump */ -#define CFG_CMD_SPI 0x0000100000000000U /* SPI utility */ -#define CFG_CMD_FDOS 0x0000200000000000U /* Floppy DOS support */ -#define CFG_CMD_VFD 0x0000400000000000U /* VFD support (TRAB) */ -#define CFG_CMD_NAND 0x0000800000000000U /* NAND support */ -#define CFG_CMD_BMP 0x0001000000000000U /* BMP support */ -#define CFG_CMD_PORTIO 0x0002000000000000U /* Port I/O */ -#define CFG_CMD_PING 0x0004000000000000U /* ping support */ -#define CFG_CMD_MMC 0x0008000000000000U /* MMC support */ -#define CFG_CMD_FAT 0x0010000000000000U /* FAT support */ -#define CFG_CMD_IMLS 0x0020000000000000U /* List all found images */ -#define CFG_CMD_ITEST 0x0040000000000000U /* Integer (and string) test */ -#define CFG_CMD_NFS 0x0080000000000000U /* NFS support */ - -#define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFU /* ALL commands */ +#define CFG_CMD_NET 0x00000080ULL /* bootp, tftpboot, rarpboot */ +#define CFG_CMD_ENV 0x00000100ULL /* saveenv */ +#define CFG_CMD_KGDB 0x0000000000000200ULL /* kgdb */ +#define CFG_CMD_PCMCIA 0x00000400ULL /* PCMCIA support */ +#define CFG_CMD_IDE 0x00000800ULL /* IDE harddisk support */ +#define CFG_CMD_PCI 0x00001000ULL /* pciinfo */ +#define CFG_CMD_IRQ 0x00002000ULL /* irqinfo */ +#define CFG_CMD_BOOTD 0x00004000ULL /* bootd */ +#define CFG_CMD_CONSOLE 0x00008000ULL /* coninfo */ +#define CFG_CMD_EEPROM 0x00010000ULL /* EEPROM read/write support */ +#define CFG_CMD_ASKENV 0x00020000ULL /* ask for env variable */ +#define CFG_CMD_RUN 0x00040000ULL /* run command in env variable */ +#define CFG_CMD_ECHO 0x00080000ULL /* echo arguments */ +#define CFG_CMD_I2C 0x00100000ULL /* I2C serial bus support */ +#define CFG_CMD_REGINFO 0x00200000ULL /* Register dump */ +#define CFG_CMD_IMMAP 0x00400000ULL /* IMMR dump support */ +#define CFG_CMD_DATE 0x00800000ULL /* support for RTC, date/time...*/ +#define CFG_CMD_DHCP 0x01000000ULL /* DHCP Support */ +#define CFG_CMD_BEDBUG 0x02000000ULL /* Include BedBug Debugger */ +#define CFG_CMD_FDC 0x04000000ULL /* Floppy Disk Support */ +#define CFG_CMD_SCSI 0x08000000ULL /* SCSI Support */ +#define CFG_CMD_AUTOSCRIPT 0x10000000ULL /* Autoscript Support */ +#define CFG_CMD_MII 0x20000000ULL /* MII support */ +#define CFG_CMD_SETGETDCR 0x40000000ULL /* DCR support on 4xx */ +#define CFG_CMD_BSP 0x80000000ULL /* Board Specific functions */ + +#define CFG_CMD_ELF 0x0000000100000000ULL /* ELF (VxWorks) load/boot cmd */ +#define CFG_CMD_MISC 0x0000000200000000ULL /* Misc functions like sleep etc*/ +#define CFG_CMD_USB 0x0000000400000000ULL /* USB Support */ +#define CFG_CMD_DOC 0x0000000800000000ULL /* Disk-On-Chip Support */ +#define CFG_CMD_JFFS2 0x0000001000000000ULL /* JFFS2 Support */ +#define CFG_CMD_DTT 0x0000002000000000ULL /* Digital Therm and Thermostat */ +#define CFG_CMD_SDRAM 0x0000004000000000ULL /* SDRAM DIMM SPD info printout */ +#define CFG_CMD_DIAG 0x0000008000000000ULL /* Diagnostics */ +#define CFG_CMD_FPGA 0x0000010000000000ULL /* FPGA configuration Support */ +#define CFG_CMD_HWFLOW 0x0000020000000000ULL /* RTS/CTS hw flow control */ +#define CFG_CMD_SAVES 0x0000040000000000ULL /* save S record dump */ +#define CFG_CMD_SPI 0x0000100000000000ULL /* SPI utility */ +#define CFG_CMD_FDOS 0x0000200000000000ULL /* Floppy DOS support */ +#define CFG_CMD_VFD 0x0000400000000000ULL /* VFD support (TRAB) */ +#define CFG_CMD_NAND 0x0000800000000000ULL /* NAND support */ +#define CFG_CMD_BMP 0x0001000000000000ULL /* BMP support */ +#define CFG_CMD_PORTIO 0x0002000000000000ULL /* Port I/O */ +#define CFG_CMD_PING 0x0004000000000000ULL /* ping support */ +#define CFG_CMD_MMC 0x0008000000000000ULL /* MMC support */ +#define CFG_CMD_FAT 0x0010000000000000ULL /* FAT support */ +#define CFG_CMD_IMLS 0x0020000000000000ULL /* List all found images */ +#define CFG_CMD_ITEST 0x0040000000000000ULL /* Integer (and string) test */ +#define CFG_CMD_NFS 0x0080000000000000ULL /* NFS support */ +#define CFG_CMD_REISER 0x0100000000000000ULL /* Reiserfs support */ +#define CFG_CMD_CDP 0x0200000000000000ULL /* Cisco Discovery Protocol */ +#define CFG_CMD_XIMG 0x0400000000000000ULL /* Load part of Multi Image */ +#define CFG_CMD_UNIVERSE 0x0800000000000000ULL /* Tundra Universe Support */ +#define CFG_CMD_EXT2 0x1000000000000000ULL /* EXT2 Support */ +#define CFG_CMD_SNTP 0x2000000000000000ULL /* SNTP support */ +#define CFG_CMD_DISPLAY 0x4000000000000000ULL /* Display support */ +#define CFG_CMD_MFSL 0x8000000000000000ULL /* FSL support for Microblaze */ + +#define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFULL /* ALL commands */ /* Commands that are considered "non-standard" for some reason * (memory hogs, requires special hardware, not fully tested, etc.) @@ -98,14 +106,16 @@ CFG_CMD_BMP | \ CFG_CMD_BSP | \ CFG_CMD_CACHE | \ + CFG_CMD_CDP | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ CFG_CMD_DIAG | \ + CFG_CMD_DISPLAY | \ CFG_CMD_DOC | \ CFG_CMD_DTT | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ + CFG_CMD_EXT2 | \ CFG_CMD_FDC | \ CFG_CMD_FAT | \ CFG_CMD_FDOS | \ @@ -116,6 +126,7 @@ CFG_CMD_IRQ | \ CFG_CMD_JFFS2 | \ CFG_CMD_KGDB | \ + CFG_CMD_MFSL | \ CFG_CMD_MII | \ CFG_CMD_MMC | \ CFG_CMD_NAND | \ @@ -124,10 +135,13 @@ CFG_CMD_PING | \ CFG_CMD_PORTIO | \ CFG_CMD_REGINFO | \ + CFG_CMD_REISER | \ CFG_CMD_SAVES | \ CFG_CMD_SCSI | \ CFG_CMD_SDRAM | \ + CFG_CMD_SNTP | \ CFG_CMD_SPI | \ + CFG_CMD_UNIVERSE | \ CFG_CMD_USB | \ CFG_CMD_VFD ) @@ -141,31 +155,9 @@ /* - * optional BOOTP fields + * Temporary placeholder until all users directly + * include the proper include file, "config_bootp.h". */ - -#define CONFIG_BOOTP_SUBNETMASK 0x00000001 -#define CONFIG_BOOTP_GATEWAY 0x00000002 -#define CONFIG_BOOTP_HOSTNAME 0x00000004 -#define CONFIG_BOOTP_NISDOMAIN 0x00000008 -#define CONFIG_BOOTP_BOOTPATH 0x00000010 -#define CONFIG_BOOTP_BOOTFILESIZE 0x00000020 -#define CONFIG_BOOTP_DNS 0x00000040 -#define CONFIG_BOOTP_DNS2 0x00000080 -#define CONFIG_BOOTP_SEND_HOSTNAME 0x00000100 - -#define CONFIG_BOOTP_VENDOREX 0x80000000 - -#define CONFIG_BOOTP_ALL (~CONFIG_BOOTP_VENDOREX) - - -#define CONFIG_BOOTP_DEFAULT (CONFIG_BOOTP_SUBNETMASK | \ - CONFIG_BOOTP_GATEWAY | \ - CONFIG_BOOTP_HOSTNAME | \ - CONFIG_BOOTP_BOOTPATH) - -#ifndef CONFIG_BOOTP_MASK -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -#endif +#include "config_bootp.h" #endif /* _CMD_CONFIG_H */