X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfig_cmd_all.h;h=73c0558202144110281d5605a40b13811178562a;hb=0f57f6a3fe26a9c2d69b34e9caf8f83082d77636;hp=c2bb094e2a1cd2d6bfbabb1d19d26aa610a1ffb8;hpb=1a247ba7fa5fb09f56892a09a990f03ce564b3e2;p=u-boot

diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index c2bb094e2a..73c0558202 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -15,11 +15,11 @@
 
 #define CONFIG_CMD_AMBAPP	/* AMBA Plug & Play Bus print utility */
 #define CONFIG_CMD_ASKENV	/* ask for env variable		*/
-#define CONFIG_CMD_AUTOSCRIPT	/* Autoscript Support		*/
 #define CONFIG_CMD_BDI		/* bdinfo			*/
 #define CONFIG_CMD_BEDBUG	/* Include BedBug Debugger	*/
 #define CONFIG_CMD_BMP		/* BMP support			*/
 #define CONFIG_CMD_BOOTD	/* bootd			*/
+#define CONFIG_CMD_BOOTZ	/* boot zImage			*/
 #define CONFIG_CMD_BSP		/* Board Specific functions	*/
 #define CONFIG_CMD_CACHE	/* icache, dcache		*/
 #define CONFIG_CMD_CDP		/* Cisco Discovery Protocol	*/
@@ -31,9 +31,9 @@
 #define CONFIG_CMD_DOC		/* Disk-On-Chip Support		*/
 #define CONFIG_CMD_DTT		/* Digital Therm and Thermostat */
 #define CONFIG_CMD_ECHO		/* echo arguments		*/
+#define CONFIG_CMD_EDITENV	/* editenv			*/
 #define CONFIG_CMD_EEPROM	/* EEPROM read/write support	*/
 #define CONFIG_CMD_ELF		/* ELF (VxWorks) load/boot cmd	*/
-#define CONFIG_CMD_ENV		/* saveenv			*/
 #define CONFIG_CMD_EXT2		/* EXT2 Support			*/
 #define CONFIG_CMD_FAT		/* FAT support			*/
 #define CONFIG_CMD_FDC		/* Floppy Disk Support		*/
@@ -50,6 +50,7 @@
 #define CONFIG_CMD_ITEST	/* Integer (and string) test	*/
 #define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
 #define CONFIG_CMD_KGDB		/* kgdb				*/
+#define CONFIG_CMD_LICENSE	/* console license display	*/
 #define CONFIG_CMD_LOADB	/* loadb			*/
 #define CONFIG_CMD_LOADS	/* loads			*/
 #define CONFIG_CMD_MEMORY	/* md mm nm mw cp cmp crc base loop mtest */
@@ -57,6 +58,7 @@
 #define CONFIG_CMD_MII		/* MII support			*/
 #define CONFIG_CMD_MISC		/* Misc functions like sleep etc*/
 #define CONFIG_CMD_MMC		/* MMC support			*/
+#define CONFIG_CMD_MTDPARTS	/* mtd parts support		*/
 #define CONFIG_CMD_NAND		/* NAND support			*/
 #define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
 #define CONFIG_CMD_NFS		/* NFS support			*/
@@ -67,19 +69,23 @@
 #define CONFIG_CMD_PORTIO	/* Port I/O			*/
 #define CONFIG_CMD_REGINFO	/* Register dump		*/
 #define CONFIG_CMD_REISER	/* Reiserfs support		*/
+#define CONFIG_CMD_RARP		/* rarpboot support		*/
 #define CONFIG_CMD_RUN		/* run command in env variable	*/
+#define CONFIG_CMD_SAVEENV	/* saveenv			*/
 #define CONFIG_CMD_SAVES	/* save S record dump		*/
 #define CONFIG_CMD_SCSI		/* SCSI Support			*/
 #define CONFIG_CMD_SDRAM	/* SDRAM DIMM SPD info printout */
 #define CONFIG_CMD_SETEXPR	/* setexpr support		*/
 #define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
 #define CONFIG_CMD_SNTP		/* SNTP support			*/
+#define CONFIG_CMD_SOURCE	/* "source" command support	*/
 #define CONFIG_CMD_SPI		/* SPI utility			*/
 #define CONFIG_CMD_TERMINAL	/* built-in Serial Terminal	*/
+#define CONFIG_CMD_UBI		/* UBI Support			*/
+#define CONFIG_CMD_UBIFS	/* UBIFS Support		*/
 #define CONFIG_CMD_UNIVERSE	/* Tundra Universe Support	*/
+#define CONFIG_CMD_UNZIP	/* unzip from memory to memory	*/
 #define CONFIG_CMD_USB		/* USB Support			*/
-#define CONFIG_CMD_VFD		/* VFD support (TRAB)		*/
 #define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
-#define CONFIG_CMD_AT91_SPIMUX	/* AT91 MMC/SPI Mux Support     */
 
 #endif	/* _CONFIG_CMD_ALL_H */