X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FAdder.h;h=a23c7ffffdba7362ff68b64f4f05bc77b54cec1f;hb=de6f604de245b19ce2e330bc63b6522af134d7ae;hp=e4d30a155c669ac817814aa7abc1e0e62da43309;hpb=50bd0057ba8fceeb48533f8b1a652ccd0e170838;p=u-boot

diff --git a/include/configs/Adder.h b/include/configs/Adder.h
index e4d30a155c..a23c7ffffd 100644
--- a/include/configs/Adder.h
+++ b/include/configs/Adder.h
@@ -32,6 +32,8 @@
 
 #define CONFIG_ADDER				/* Analogue&Micro Adder board	*/
 
+#define	CONFIG_SYS_TEXT_BASE	0xFE000000
+
 #define	CONFIG_8xx_CONS_SMC1	1		/* Console is on SMC1		*/
 #define CONFIG_BAUDRATE		38400
 
@@ -88,7 +90,6 @@
  */
 #define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_LONGHELP				/* #undef to save memory	*/
 #define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)  /* Print Buffer Size */
@@ -99,8 +100,6 @@
 
 #define CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
 
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*-----------------------------------------------------------------------
  * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero)
  */
@@ -130,7 +129,7 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for Monitor   */
 #ifdef CONFIG_BZIP2
 #define CONFIG_SYS_MALLOC_LEN		(2500 << 10)	/* Reserve ~2.5 MB for malloc() */
@@ -168,9 +167,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END	0x2F00		/* End of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_SIZE	128  /* Size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00		/* Size of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -207,14 +205,6 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx chips			*/
 
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from flash	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1